• 설비공학논문집
• /
• 제16권7호
• /
• pp.658-666
• /
• 2004

In this paper, a two-dimensional transient ground-coupled numerical model for slab-on-grade foundation is developed and integrated into EnergyPlus. A validation analysis is first presented to ensure that for the developed building foundation heat transfer module is properly implemented within EnergyPlus. Then, the predictions from the developed model are compared to those obtained from the simplified building foundation model currently used in EnergyPlus. The results show that the developed foundation heat transfer module accounts better for the effects of the ground thermal mass attributed to the ground than the simplified foundation model currently used in EnergyPlus.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.265-273
• /
• 2016

A water wall system is one of the most important components of a boiler in a thermal power plant, and it is a nonlinear Multi-Input and Multi-Output (MIMO) system, with 6 inputs and 3 outputs. Three models are developed and comp for the controller design, including a linear model, a multilayer feed-forward neural network (MFNN) model and an Echo State Network (ESN) model. First, the linear model is developed by linearizing a given nonlinear model and is analyzed as a function of the operating point. Second, the MFNN and the ESN are developed by using training data from the nonlinear model. The three models are validated using Matlab with nonlinear input-output data that was not used during training.

• 대한교통학회지
• /
• 제27권2호
• /
• pp.133-144
• /
• 2009

현재 국내에서는 지역간 교통의 이동성 및 안전성을 향상시키기 위해 국도를 대상으로 ITS사업을 추진중에 있다. 이러한 ITS 사업을 통해 교통정보를 이용자에게 실시간으로 제공해 줌으로써 기존의 교통시설의 이용을 극대화 하는데 목적을 두고 있다. 이러한 정보 제공시 운전자에게 보다 정확한 통행시간정보를 제공해 주는것이 가장 중요하므로 본 연구에서는 자료의 전처리를 통해 원시데이터의 이상치 제거 및 결측처리를 실시하였다. 이를 통해 통행시간 예측의 기본이 되는 원시데이터의 정확성을 향상시켜 정보의 신뢰도를 높일 수 있는 방안을 모색하였다. 그리고 통행시간 예측을 위해 단속류 도로의 특성을 보다 정확히 반영할 수 있는 히스토리컬 프로파일 모형을 구축하였으며 실제 교통류의 특성을 적극적으로 반영하기 위해 보정식을 개발하였다. 따라서 제안된 모형과 히스토리컬 프로파일 모형과 보정식을 통해 통행시간을 예측한 후 기존의 방식인 신경망 모형, 칼만필터 모형과의 비교검증을 실시하였다. 결과적으로 일반적인 상황에서는 칼만필터 모형과 비슷한 예측력을 보였으나, 첨두시나 유고상황에서는 개발모형이 실제 교통흐름을 상대적으로 정확히 반영하여 예측을 수행함을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제35권1호
• /
• pp.1-9
• /
• 2010

A mathematical model was developed to predict the fuel consumption rate consumed by agricultural tractors under arbitrary loaded conditions. The model utilizes the measured data on the fuel consumptions at the full load and at the rated engine speed with partial loads, which can easily be obtained from the official OECD tractor test reports. It was found from the analysis of the measured fuel consumption data that the fuel consumptions at two different speeds does not change with power. The model was developed based on this fact and validated with the measured data of the 159 tractor test reports. The fuel consumptions predicted by the model were compared with those measured under the partially loaded conditions specified in the official OECD tractor test code II. The percent errors of the predicted fuel consumptions were in a range from 0.36 to 2.86% which assured that the developed fuel consumption model can be used practically to predict the fuel consumptions at any speed and power combinations. It was also shown that the developed model predicts the fuel consumption rate better than the Grisso's model.

• 복합신소재구조학회 논문집
• /
• 제5권4호
• /
• pp.1-10
• /
• 2014

A progressive failure analysis procedure for composite laminates is developed in here and in the companion paper. An anisotropic plastic constitutive model for fiber-reinforced composite material, is developed, which is simple and efficient to be implemented into computer program for a predictive analysis procedure of composites. In current development of the constitutive model, an incremental elastic-plastic constitutive model is adopted to represent progressively the nonlinear material behavior of composite materials until a material failure is predicted. An anisotropic initial yield criterion is established that includes the effects of different yield strengths in each material direction, and between tension and compression. Anisotropic work-hardening model and subsequent yield surface are developed to describe material behavior beyond the initial yield under the general loading condition. The current model is implemented into a computer code, which is Predictive Analysis for Composite Structures (PACS), and is presented in the companion paper. The accuracy and efficiency of the anisotropic plastic constitutive model are verified by solving a number of various fiber-reinforced composite laminates with and without geometric discontinuity. The comparisons of the numerical results to the experimental and other numerical results available in the literature indicate the validity and efficiency of the developed model.

• Industrial Engineering and Management Systems
• /
• 제10권2호
• /
• pp.97-103
• /
• 2011

This paper develops a technology level quantification (TLQ) model by utilizing a learning curve. Original learning curve shows the relationship between cumulative number of units and the required time for the unit. On the other hand, in our developed model, the technology level, such as speed of production and quality of the produced items, is expressed as a function of not cumulative number of units but time, for increasing generality. Furthermore, for expressing each learning that consists of conceptual learning and operational learning, S-curve is utilized in our developed model. By fitting the S-curve and/or decomposing into some activities, our TQL model can be applied to approximate organizational and complicated process. Some variations in time and levels, parameters of our developed model are shown. By using the parameters, the procedure to identify our developed model is proposed. Also, the influential factors for the parameters of our developed model are discussed with classifying the factors into technoware, infoware, humanware, and orgaware. The expected technology level is utilized for expecting the capacity of production system, and the expected capacity can be utilized in predicting various changes in the organization and deciding managerial decision about TT. A case study in manufacturing industry shows the effectiveness of the developed model.

• 한국수자원학회논문집
• /
• 제42권3호
• /
• pp.247-257
• /
• 2009

본 연구에서는 다방향 흐름 분배 알고리듬과 실시간 보정 알고리듬을 개발하여 분포형 강우-유출 모형에 적용하였다. 개발된 알고리듬의 적용과 분포형 모형 적용상의 약점인 계산시간 개선을 위해 비교적 간단한 수문과정 지배 방정식들을 이용하여 분포형 강우-유출 모형을 작성하였다. DEM(Digital Elevation Model)를 이용하여 공간해상도 변화에 따른 지형정보와 흐름정보의 변동성을 파악하였다. 모의수행 전처리 과정으로 가용한 고해상도 DEM 자료를 사용하여 공간해상도 변화에 따른 흐름정보의 손실을 최소화하고 상세흐름정보를 저해상도 흐름정보에 반영시키는 다방향 흐름분배 알고리듬을 개발하였다. 또한 실시간으로 유역상태량을 보정하는 실시간 보정 알고리듬을 개발하다. 개발된 모형은 저해상도 모의에서 유출 과정의 실제적 거동 정보를 유지할 수 있다. 그러므로 예측 정확도 향상 및 계산시간의 개선이 기대된다.

• 대한간호학회지
• /
• 제33권3호
• /
• pp.376-385
• /
• 2003

Purpose: This study was conducted to develop gerontological curriculum model which reflects the need of Korean society. Method: Three round Delphi survey method was applied to find consensus of gerontological nursing competencies (knowledge, attitudes and skills) for graduates of nursing schools from the panel of gerontological nursing practice experts. Important concepts in gerontological nursing were delineated from literature review and discussions of gerontological nursing educators. Based on these results the gerontological nursing curriculum model was developed and course structure outlined by the researchers as a group. Result: As the result of delphi survey, 32 items of knowledge, 29 items of attitude, and 21 items of skill were identified. The curriculum model constructed around a cube with three plane- functional capacity levels, settings, and nursing practice. Specific knowledge, attitudes and skills for gerontological theory and practicum course were suggested. Competency items were assigned to theory and/or practice. Conclusion: A curriculum model for gerontological nursing has been developed by a group of gerontological nursing educators. The curriculum model should be further tested and developed with detailed theory and practicum course outline and textbooks.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.224-229
• /
• 1998

This study was conducted to develop the simple and convenient irrigation control model which can maintain the appropriate rates of irrigation and drainage of nutrient solution according to the environmental conditions and growth stages in soilless culture of cucumber. In order to obtain fundamental data for development of the model, investigation of the actual state of soilless culture practices was carried out. Most irrigation systems of soilless culture were controlled by the time clock. Evapotranspiration of cucumber in soilless culture was investigated and correlations with environmental conditions were analyzed, and its prediction model was developed. A irrigation control model based on the time clock control and there were considered seasons, weather conditions, and growth stages was developed. Applicability of the model was tested by simulation. Drainage rates of irrigation system controlled by conventional time clock, integrated solar radiation, and the developed model were 61%, 20%, and 32%, respectively in cucumber perlite culture.

• 대한산업공학회지
• /
• 제25권3호
• /
• pp.393-403
• /
• 1999

In this research, a reach posture prediction based on a two-segment trunk model was made. Recently, reach posture prediction models have used inverse kinematics to provide a single posture that a person naturally takes, with a single segment trunk model that had some shortcomings. A two-segment trunk model was first developed with two links; pelvis link and lumbar-thoracic link. The former refers to the link from the hip joint to L5/S1 joint while the latter does the link from L5/S1 to the shoulder joint. Second, a reach prediction model was developed using the two-segment trunk model. As a result, more reliable equations for two-segment trunk motion were obtained, and the lean direction which refers to the movement direction of the trunk was not found to have a significant effect on the two-segment trunk motion. The results also showed that the hip joint is more preferred over L5/S1 to serve as a reference point for trunk models and the reach prediction model being developed predicted the real posture accurately.