• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.30.2-30.2
• /
• 2011

In this report, we present in-orbit radiometric performance prediction for the Amon-Ra (Albedo Monitor and Radiometer) energy channel instrument. The Integrated Ray Tracing (IRT) computational technique uses the ray sets arriving at the Amon-Ra instrument aperture orbiting around the L1 halo orbit. Using this, the variation of flux arriving at the energy channel detector was obtained when the Amon-Ra instrument including the energy channel design observes the Sun and Earth alternately. The flux detectability was verified at the energy channel detector (LME-500-A, InfraTecTM). The detector time response and RMS signal voltage were then derived from the simulated flux variation results. The computation results demonstrate that the designed energy channel optical system satisfies the in-orbit detectability requirement. The technical details of energy channel instrument design, IRT model construction, radiative transfer simulation and output signal computation results are presented together with future development plan.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.28.1-28.1
• /
• 2008

Detection of spectral bio-signatures from extra terrestrial planets has received an increasing attention from the astronomy and space science communities in recent years. In an attempt to better-understand disk averaged spectra of the only know terrestrial planet i.e. Earth, we are constructing a scale-able 3D earth model with surface reflectance and scattering properties. The USGS coastal line data were used to form coastal line segments and they were then stitched to generate continuous coastal lines to represent major continents and large islands. As the first stage of model verification, wavelength dependent ocean and land reflectance data and scattering characteristics were defined over the land and sea surfaces respectively. We then performed ray tracing based imaging and radiometric transfer simulations using a hypothetical optical payload receiving the reflected and scattered sun lights from the earth. The model concept, computational details, the simulation results are discussed as well as the future development plan.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.51
• /
• pp.391-414
• /
• 2011

The advance into the overseas markets of domestic enterprises has been increasing continuously. Brazil, for domestic companies, has been emerging as the huge potential country in the development of markets and resources. According to the reports from World Bank and Brazil government, one of the biggest difficulties of businesses in Brazil for foreign enterprises is the lack of Transportation Infrastructure and high logistics costs. However, until now, there is no professional institute and systematic DB in Korea to provide the overall information of Brazil logistics or details oriented to enterprises' needs; furthermore, enterprises have the difficulties to gather or investigation the logistics information by themselves due to the constraints of language and budget. For these reasons, with the latest data, this study reviews the overall information of Brazil logistics environment and provides the status of Brazil logistics that is necessary for enterprises to advance into Brazil market. Also, this explains the reason for why Brazil has such a high logistics cost with the objective data. In addition, this paper carried out the benchmarking case study as an example of logistics strategy and plan in Brazil. This study can contribute to serve as useful information for domestic enterprises which planning or doing business in Brazil.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.130-133
• /
• 2006

Owing to Higher story tendency and ceiling hight restriction of recent times, even though the depth of Coupling Beam decreases the demand efficiency is coming to be high rather so it is the difficult to satisfy a demand efficiency with the actual existing RC/Steel condition. It has been researched a lot of methods as an alternative plan about these but designer cannot apply them for the reason ; the structure standard and theory background are not taking a triangular position. As accomplishing the test research about the beams-wall connections department of steel-plate composite coupling beams from the research in the study it examines closely the beams-wall connections conduct quality and tries to provide the fundamental data for reasonable and optimum connection department designs. It knows that connection fixation degree and composite conduct degree of member part together become the important variable showing an energy dissipation ability in Test result.

• Journal of the Korean housing association
• /
• v.17 no.1
• /
• pp.9-17
• /
• 2006

In the modem society of Japan, specially before and after the World War II, one of the most important problem is socially to build housing of working classes. In those days, Ken Ichiura had been led the dwelling of modem Japanese architecture. He had worked in wide spheres of action like private residence, public housing, collective housing area and urban planning for about fifty years. But until now, because studies on public housing of Japan has been discussed only aspect of architectural design, there was almost no study about Ken Ichiura who acted in practical affairs. So this study aims to consider about the Ken Ichiura's research on dwelling and the relation with the then social circumstance. It was summarized as four details of Ken Ichiura's activities on Dwellings before the end of World War II. First, he proposed half-government-supervised system by economic reason on provision of dwellings. Second, he proposed dry construction system by material and structural reason on economic and stability supply. Third, he proposed standardization and industrialization by economic reason on industrialization form material to construction of industry. And the last, he also proposed standard plan and standard design by economical and mass production supply dwellings during the war.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.181-186
• /
• 2009

Recently, the consuming efficiency of energy and natural resources has been a hot issue because of the continuous increasing of energy consumption and soaring of international oil prices. We tried to seek an action plan for the government's new paradigm 'Low-Carbon, Green Growth' by consuming energy efficiently and improving in energy management based on ubiquitous IT technologies. In this study, the library survey method is adopted for this study and IP-USN(internet protocol based ubiquitous sensor network) is considered as a core technology among various ubiquitous IT technologies. The purpose of this study is to deliver a method of energy management through integrating the context information gathered from sensors with digital space models and visualizing them together. The details are to survey the technologies of digital space modeling, USN based monitoring, building energy management and to integrate these technologies all together. This study will contribute to the enhancement of efficient building energy management by grasping the accurate situation of energy consuming in the building in realtime and minimizing unnecessary energy wastes.

• Journal of KIBIM
• /
• v.3 no.4
• /
• pp.1-10
• /
• 2013

In order to boost productivity and efficiency of architectural design, architect accumulates materials and details which are repeatedly used. According as introduction and application of BIM (Building Information Modeling) have proliferated, a number of data are being produced. BIM data constructed in a stage of architectural design reduces repetitive works of design and can be used in estimate and construction, maintenance. BIM library gathered these data are able to enhance participants collaboration and design improvement. Library is a vital factor in BIM and a number of libraries are needed as BIM introduction and application have proliferated in architecture industry. However, BIM Library establishment and related research development are incomplete. And specific standard setting and institutional environment for BIM library building have not been achieved. As such a vast amount of information are generated but there is no systematic plan and reuse frequency is low. So it is necessary to build system for effective data sharing and operation management. In this study, through establishment of BIM standard system and construction of management environmental system, it has an object in view for developing framework which can efficiently manage various libraries happened in BIM architectural design field.

• Journal of Animal Environmental Science
• /
• v.19 no.2
• /
• pp.183-190
• /
• 2013

Establishment of a new concept of environmental friendly livestock manure management is required based on the facts. But now liquid fertilizer quality in korea shows a large difference among regions and the regulations are uncertain. Focusing on precedent study on main level-grading factors of liquid fertilizer quality certification, the study collected laws and standards related to liquid fertilizer of livestock manure at home and abroad and produced evaluation standards. Liquid fertilizer was divided into four factors (fertilizing value, harmfulness, stability and uniformity). According to each item, scores were awarded based on 16 details: fertilizing value (Nitrogen concentration, the whole concentration of Nitrogen, Phosphoric acid and Kalium), harmfulness (heavy metals, pathogenic microorganism and antibiotics), stability (maturity degree and odour), uniformity (EC, BOD, SS, moisture content and salt). The grade of liquid fertilizer, A (42~48), B (34~41), C (26~33) were rated using total scores.

• Journal of the Korea Institute of Building Construction
• /
• v.2 no.3
• /
• pp.155-162
• /
• 2002

The Ministry of Construction-Transportation released a plan about EVMS in 1993 in order to prepare measures for an efficient public construction project, and prepared an enforcement proposal concretely in June for 2000 years, and have enforce a public project by an example with a target. Therefore, accurate analysis and evaluation about field progress are required for efficient management of a building construction, and must be established building construction management system for fast action about a problem However, unified management cannot be consisting because a work progress system is different from details estimate system within a country. and There is not still a definite standard in progress measurement for an application of EVMS. A purpose of this study is to present an improvement about a problem of progress measurement for an application of EVMS. The contents of a study, inquired into a progress measurement method and a standard to use in the field of a public construction and private construction and Checks a problem and presented an improvement item necessary for and is as follows. $\circled1$ must establishes a control account and progress measurement standard. $\circled2$ must manage progress in a activity viewpoint. $\circled3$ must use an accurate CPM process management technique.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.10
• /
• pp.621-628
• /
• 2020

The study investigates a promising sustainable crop-insurance risk mitigation plan, namely, Group Risk Income Protection (GRIP) insurance, for the cultivation of Para rubber, a crop for which Southern Thailand constitutes over half of the national harvested area, but which recently experienced a shift in prices and yields, substantially affecting farmers. The research takes as its starting point historical data covering the 2001-2018 period for this crop's cultivation in three of Thailand's Andaman South Coast provinces - Trang, Krabi, and Phangnga. The results indicate that, from a relatively high base in 2001, Trang's yields dropped sharply before a more gradual decline (apparently still ongoing), whereas those for Krabi and Phangnga followed a smoother downward trajectory throughout the period. Meanwhile, prices everywhere rose steadily before falling from 2011 onwards - a decrease that shows no signs of abating. The yield/price relationship was negative for one province and slightly positive for the other provinces. Furthermore, all provinces' Para rubber income initially grew continually but fell after 2011, with this trend seemingly persisting to this day. The paper's findings suggest that, after early moves to entrench GRIP insurance, it looks set to become a feasible option for Para rubber, making policy agreement details an interesting subject for subsequent investigations.