• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.277-282
• /
• 2007

In recent years, dramatic advances in information technology have motivated the construction industry to improve its productivity. Most construction companies are trying to utilize some new information technologies for enhancing the structure quality, shortening construction time, and reducing the construction cost. Digital Mock-Up (DMU) technology utilizes 3D CAD/CAM system that shows the shape of a structure on the computer screen. By modeling and assembling the structure in 3D dimensional environments, some errors in design can be found before or during construction. In this paper, DMU technology was applied to the detail design and construction of In-Cheon Bridge and its effectiveness was evaluated. All components of a PSC box girder segment were modeled and assembled by using of 3D CAD tools and then, some interferences between components and errors were found and revised appropriately before construction. Consequently, DMU technology would improve the quality of the structure and reduce time and cost for construction.

• 한국인구학
• /
• 제28권2호
• /
• pp.131-164
• /
• 2005

현재 노동시장 고용과제 중 큰 과제는 경기침체 등으로 비롯되는 청년실업의 문제다. 본 연구는 특히 지식 정보화시대에 IT 부문의 전문지식과 기술을 갖고 대학을 졸업하는 신규 전문인력의 취업률이 타 부문에 비해서 높을 것으로 생각되고 있으나 취업률이 비교적 저조하게 나타나는 경기 외의 요인을 분석하였다. IT 인력은 전체적으로 양적으로는 초과공급이지만 질적으로는 초과수요를 보이고 있는 점을 분석하였고 동일한 직업 내에도 학력별로 초과수요와 초과공급이 존재하는 것을 제시하였다. 본 연구는 미취업의 구조적 원인을 세부직업 부문별로 학력별로 인력이동의 저해가 발생하는 가를 실증적으로 추정 분석하였다. 그 결과 IT 노동시장의 26개 세부직업 부문 중 부문 간 저해는 15%, 부문 내 저해요인은 85%로 요인을 분석하였다. 그리고 IT 노동시장의 직업군별로 세부직업별/학력별 인력이동 저해요인을 분석하였다. 추정결과 이동 저해를 저해하는 학력별 요인이 세부직업별 요인보다 1.3배에서 11배 이상 인력이동을 더 제한하고 있었다. 학력별 요인이 큰 것은 직업 내 학력별로 IT 전문직업 능력의 차이 즉 기술 불일치를 반영하고 있었다. 오차의 크기도 직업군에 따라 다르게 나타나 IT 직업별 노동시장마다 다른 제도적 요인과 시장적 요인이 있음을 보여주었다. 정책제언은 신규 인력이 꼭 필요한 IT 전문직업 능력의 제고와 철저한 노동시장 수요를 기초로 초과공급으로 평가받은 IT 학과는 공급이 부족한 IT 학과로 전환시키거나 정원을 축소 조정할 것을 제안하였다.

• Journal of Power Electronics
• /
• 제9권6호
• /
• pp.949-959
• /
• 2009

This paper presents a systematic investigation of the fault-mode behaviors of matrix converter systems. Knowledge about converter behaviors after fault occurrence is important from the standpoint of reliable system design, protection and fault-tolerant control. Converter behaviors have been, in detail, examined with both qualitative and quantitative approaches for key fault types, such as switch open-circuited faults and switch short-circuited faults. Investigating the fault-mode behaviors of matrix converters reveals that converter operation with switch short-circuited faults leads to overvoltage stresses as well as overcurrent stresses on other healthy switching components. On the other hand, switch open-circuited faults only result in overvoltage to other switching components. This study can be used to predict fault-mode converter behaviors and determine additional stresses on remaining power circuit components under fault-mode operations.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2001년도 추계학술대회 논문집
• /
• pp.257-260
• /
• 2001

The primary objective of Supply Chain Management (SCM) is to optimize the cash, material and information flow considering all components of Supply Chain (SC) . The plan, established for achieving such objective, is called Supply Chain Planning (SCP) . This SCP gives each SC component specific volume or operation task, should be done in specific due date, for optimizing SC. In detail, the degree of accomplishment for SCP, depends on the SCP achievement of each SC components, is very close to successful SCM. However, this achievement is affected by uncertainties about time and volume. In general, reliability concepts means the probability that a product or system will perform its specified function under prescribed conditions without failure for a specified period of time. Therefore, the concept of Supply Chain Reliability (SCR) and an analytic methodology to calculate the degree of achievement SCP using reliability concept are proposed in this paper. SCR means that the degree of achievement for SCP considering all SC components in due date. SCR can be used to measure the performance of whole supply chain and indicate the direction of SCP.

• Asia pacific journal of information systems
• /
• 제5권2호
• /
• pp.143-176
• /
• 1995

We present an overview of the Extensional Object Model (ExOM) and describe in detail the learning and classification components which integrate concepts from machine learning and object-oriented databases. The ExOM emphasizes flexibility in information acquisition, learning, and classification which are useful to support tasks such as diagnosis, planning, design, and database mining. As a vehicle to integrate machine learning and databases, the ExOM supports a broad range of learning and classification methods and integrates the learning and classification components with traditional database functions. To ensure the integrity of ExOM databases, a subsumption testing rule is developed that encompasses categories defined by type expressions as well as concept definitions generated by machine learning algorithms. A prototype of the learning and classification components of the ExOM is implemented in Smalltalk/V Windows.

• 한국물환경학회지
• /
• 제22권5호
• /
• pp.831-837
• /
• 2006

The present study applies wavelet transform for the extraction of various periodicities which are included in TOC and pH time series of water quality and rainfall data. The primary objective of the present study is to detect the relationships between the respective data through the correlation analysis using the approximation components which are decomposed by wavelet transform. The results reveal the approximation components of TOC and pH in the 5th level of wavelet transform can explain more than 99% of the whole energy for the raw data respectively and there are considerably high correlation between the approximation components of the respective data used for the study even through no significant correlation between the raw data has been detected.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권11호
• /
• pp.616-621
• /
• 2000

This paper deals with the multiresolution analysis of wavelet transform for partial discharge(PD). Test arrangement is based on the needle-plane electrode system and applied AC high voltage. The measured PD signal was decomposed into "approximations" and "details". The approximation are the high scale, low-frequency components of the PD signal. The details are the low-scale, high frequency components. The decomposition process are iterated to 3 level, with successive approximation being decomposed in turn, so that PD signal is broken down into many lower-resolution components. Through the procedure of signal wavelet transform, signal noise extraction and signal reconstruction, the signal is analyzed to determine the magnitude of PD.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.248-249
• /
• 2006

Direct Metal Laser Sintering (DMLS) has been utilized for prototype manufacturing of functional metal components for years now. During this period the surface quality, mechanical properties, detail resolution and easiness of the process have been improved to the level suitable for direct production of complex metallic components for various applications. The paper will present the latest DMLS technology utilizing EOSINT M270 laser sintering machine and EOSTYLE support generation software for direct and rapid production of complex shaped metallic components for various purposes. The focus of the presentation will be in rapid manufacturing of customized biomedical implants and surgical devices of the latest stainless steel, titanium and cobalt-chromium-molybdenum alloys. In addition to biomedical applications, other application areas where complex metallic parts with stringent requirements are being needed will be presented.

• 한국해양공학회지
• /
• 제23권2호
• /
• pp.92-97
• /
• 2009

In order to export aircraft components or substructures, it is necessary to get a certification from the main company for the components or an airworthiness certification from the FAA. In Korea, those processes are performed by a small number of private companies for aircraft components. However, airworthiness certification has never been done in the company. To export an assembled aircraft, whether small or large, it is obligatory to get a certification for the aircraft being exported. Currently, the Korean government is trying to get BASA agreement in a few years. For a mid-size company, it is easier to get the NADCAP audit process for the supply of aircraft components to the main company. In this paper, the overall process of aircraft certification is discussed and airworthiness certification is treated for export aircraft. Moreover, the NADCAP audit process is described in detail by introducing example parts made of composite material. This detailed process would be very helpful to a small or mid-size company that wants to develop and deliver aircraft components to foreign companies.

• 한국건축친환경설비학회 논문집
• /
• 제12권6호
• /
• pp.627-640
• /
• 2018

Submetering electricity consumption data enables more detail input of end use components, such as lighting, plug, HVAC, and occupancy in building energy modeling. However, such an modeling efforts and results are rarely tried and published in terms of the estimation accuracy of electricity demand. In this research, actual submetering data obtained from a university building is analyzed and provided for building energy modeling practice. As alternative modeling cases, conventional modeling method (Case-1), using reference schedule per building usage, and main metering data based modeling method (Case-2) are established. Detail efforts are added to derive prototypical schedules from the metered data by introducing variability index. The simulation results revealed that Case-1 showed the largest error as we can expect. And Case-2 showed comparative error relative to Case-3 in terms of total electricity estimation. But Case-2 showed about two times larger error in CV (RMSE) in lighting energy demand due to lack of End Use consumption information.