• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.17-24
• /
• 1995

In this paper, it is studied the design automation method in detail structural design stage using a general-purpose CAD system. It is observed that the macro function with parametric concept is very useful in detail structural design. We applied this concept to transverse web frame, slot hole and collar plate, and bracket modeling.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04b
• /
• pp.481-486
• /
• 1998

In this paper, elastic and inelastic behavior of exterior joint of moment-resisting R.C frame with non-seismic detail subjected to reversed cyclic lateral load such as earthquake excitations was investigated. 1/2-scals subassemblage exterior beam-column joint including slab was manufactured based on similitude law. Then, pseudo static test under the displacement control was performed. The results of 1)crack pattern and failure mode, 2)degradation stiffness and strength, energy dissipation capacity from load-displacement hysteresis curve, 3)strain of steel were analysed.

• Journal of Korean Association for Spatial Structures
• /
• v.13 no.1
• /
• pp.105-112
• /
• 2013

An automation of standardized rebar shop drawing is necessary for easy application by improving workability, prompt preparation to field change request and easy revisions of shop drawing. Through investigating problem of current rebar shop drawing, we found that standardization of reinforcing detail, standardization of rebar expression and automation of rebar shop drawing program for the sake of designer is needed. We will investigate disagreement of reinforcing detail between building code and how worker build structure for standardization of reinforcing detail, demands of companies participated in rebar process for standardization of rebar expression and proper algorithm with selectable level of inputting data for automation of rebar shop drawing program for the sake of designer.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.06a
• /
• pp.260-263
• /
• 2016

Recently high dynamic range imaging technique is hot issue in computer graphic area. We present a progressive tone mapping algorithm, which is based on weighted least squares optimization framework. Our approach combines weighted leastsquaresfiltering with iCAM06, for showing more perceptual high dynamic range images in conventional display, while avoiding visual halo artifacts. We decompose high dynamic range image into base layer and detail layer. The base layer has large scale variation, it is obtained by using weighted least squares filtering, and then the base layer incorporates iCAM06 model. Then, adaptive compression on the base layer according to human visual system. Only the base layer reduces contrast, and preserving detail. The resultshows more perceptual color appearance and preserve fine detail, while avoiding common artifacts.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.828-831
• /
• 2005

In feature-based multi-resolution modeling, the features are rearranged according to a criterion for the levels of detail (LOD) of multi-resolution models. In this paper, two different LOD criteria are investigated and discussed. The one is the volumes of subtractive features, together with the precedence of additive features over subtractive features. The other is the volumes of features, regardless of whether the feature types are subtractive or additive. In addition, the algorithms to define and extract the LOD models based on the criteria are also described. The criterion of the volumes of features can be used for a wide range of applications in CAD and CAE in virtue of its generality.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.6 s.177
• /
• pp.1379-1389
• /
• 2000

In this study, a design process of robotic cell is presented. This paper focuses only on the automation of workpiece handling with robot. The presented design process enables us to analyze effectiv ely the original production system and to redesign it as an optimum production system with robots. An original production system is analyzed with respect to its economical and technological requirements for automation. If automation of the given production system is feasible, the conceptual design for automation is firstly derived. Next, the detail design is derived for the optimum conceptual design. Finally, an optimum system solution is determined after the economical and technical evaluation of all the derived detail designs. The all specifications of each element of the redesigned production system and its layout are determined at the detail design phase. This paper shows a low cost supporting tool for layout design of robotic cell with SCARA type robots.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.4
• /
• pp.85-96
• /
• 2001

In this paper, part features are classified and then its coding system is constructed by the considered characteristics of features in assemble process. Analyzing the characteristics of features, code values about part features are determined. Assembly process is divided into five functions such as transporting, handing, approaching, alignment and joining, and then the detail parameters of each functions such as determined. Code values about assembly process are determined according to detail parameters. The detail parameters are kinds of available working method and assembly tools when each assembly function is going on. By the coding system, available assembly process can be grasped and perceived for the part that it is difficult to assemble.

• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.1
• /
• pp.113-119
• /
• 1999

In order to accomplish either information system with future estimate or scientic management, application package of integrated detail management is required for Construction Company. The application package of integrated detail management is based on management of estimation, management of account. management of tax bill, management of on the spot, management of equipment and management of labor. This research focuses on the basic survey for this system such as circumstance of information system for construction company, a barrier of progress, development dirction, development article.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.28-31
• /
• 2000

In this paper, part features are classified and then coding system is constructed by the considering characteristics of features in assembly process. Analyzing the characteristics of features, code values about part features are determined. Assembly process is divided into five functions such as transporting, handling, approaching, alignment, joining and then the detail parameters of each function are determined. Code values about assembly process are determined according to detail parameters. The detail parameters are the kinds of available working method and assembly tools, when each assembly function is going on. By the coding system, available assembly process can be grasped and perceived the part that Is difficult to assemble.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.508-513
• /
• 2006

In construction of RC buildings, the quality of shop and detail drawings is very essential for the quality and safety of buildings. Nevertheless, most of thess works are left to site workers and the requirements about bar detailing such as anchorage and splice have been done without rational design and engineering. The purpose of this research is to develop a computer-aided drawing system of rebars for RC buildings. The system is based on an integrated structural design system, that is SDP. SDP manages an engineering database for structural design information. It provides all the information needed to draw rebar drawings. The drawing system consists of three modules, 1) Structual Plan Drawing System, 2) Shop Drawing System, and 3) Detail Drawing System. It is expected that not only the productivity of detail drawing works but also the quality and safety of buildings will be improved using the rebar drawing system developed in this research.