• International Journal of Control, Automation, and Systems
• /
• v.5 no.6
• /
• pp.691-700
• /
• 2007

This paper proposes a simple but effective design method of PID control using a numerical optimization method. In order to achieve both stability and performance, gain and phase margins and performance indices of step response directly compose of the cost function. Hence, the proposed approach is a multiobjective optimization problem. The main effectiveness of this approach results from the strong capability of the used optimization method. A one-dimensional example concerning gain margin illustrates the practical applicability of the optimization method. The present approach has many degrees of freedom in controller design by only adjusting related weight constants. The attained PID controller is compared with Wang#s and Ho#s methods, IAE, and ISE for a high-order process, and the simulation result for various design targets shows that the proposed approach achieves desired time-domain performance with a guarantee of frequency-domain stability.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.2
• /
• pp.215-220
• /
• 2016

Monolithically integrated devices are strongly desired in next generation power ICs to reduce the chip size and improve the efficiency and frequency response. Three examples of the embedment of different functional diode(s) into AlGaN/GaN heterojunction field-effect transistors are presented, which can minimize the parasitic effects caused by interconnection between devices.

• Journal of Industrial Technology
• /
• v.20 no.A
• /
• pp.229-238
• /
• 2000

Simulation analysis for an auto body manufacturing system has been performed in this study. The major goal is to figure out the condition yielding the production rate, 70 per hour. It is, however, very difficult to maintain this rate due to inherent system factors such as machine failure rates, machine repair rates, number of carriers between manufacturing lines(shops), carrier speed etc. We first carefully examined the system and developed a simulation model using ARENA. We then applied statistical experimental design concepts for performance analysis. Our results indicate that the buffer size of 30 and quick repair of failed robots are required for the desired production rate. Other factors, on the other hand, are seen to have minor effects on the throughput. The approach taken in this study and the results obtained may provide a practical guideline for performance analysis and thus be applied without trepidation for similar cases.

• Journal of Industrial Technology
• /
• v.21 no.B
• /
• pp.273-280
• /
• 2001

In this study, a driver model based on the lead-lag controller for stable maneuver of a highly nonlinear, multi-dimensional, numerically stiff multibody vehicle model according to the various handling test requirements such as steady-state cornering, double lange change, etc. is presented The lead-lag controller is developed with lead and lag compensation. which use the transfer function with cross-over frequency by frequency response method. The proposed driver model is applied to a vehicle model in steady-state and slalom maneuver to verify its effectiveness and validity. The results show that the proposed path control strategy is excellent both in pursuing the desired course and stability of the vehicle.

• Journal of Drive and Control
• /
• v.13 no.4
• /
• pp.7-13
• /
• 2016

This paper presents the meter-out and meter-in speed control characteristics of a pneumatic cylinder with relief valve type cushion device. The piston displacement and velocity are measured to investigate high speed driving performance with variation of the pressure setting in relief valve, air supply pressure, load mass, the supply and exhaust flow rate from the cylinder. Also, the internal pressures and temperatures driving pressure and cushion chamber are measured. The piston displacements and velocities of meter-out and meter-in control are compared experimentally determined data. A comparison experimental data meter-out and meter-in control show that a relief valve type cushion device is suitable for high speed pneumatic cylinders. The desired response characteristics of piston displacement and velocity are satisfactory adjust the pressure setting of a relief valve with varying system parameters such as air supply pressure, load mass and controlled flow rate.

• Journal of Power System Engineering
• /
• v.9 no.2
• /
• pp.65-72
• /
• 2005

A new approach is presented to design a robust sampled-data controller for an experimental flexible beam carrying an unknown payload at its free end. The purpose of this paper is to move the free end of the beam to a desired position in the specified time under vibration suppression. We derive a transfer function nominal model for the beam and quantitative description of model uncertainties based on experimentally obtained frequency response data. Robust controllers are designed by applying the sampled-data $H_{\infty}$ control and ${\mu}m-theory$, in which two types of uncertainties, structured and unstructured uncertainties, are adopted for satisfactory performance in terms of hinge position regulation and vibration damping, besides obviously asymptotic stability. The effectiveness of the proposed method is confirmed through simulation and experimentation.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.89-96
• /
• 1997

A robust speed control scheme for a brushless DC(BLDC) motor using an adaptive input-output linearization technique is presented. By using this technique, the nonlinear motor model can be linearized in Brunovski canonical form, and the desired speed dynamics can be obtained based on the linearized model. This control technique, however, gives an undesirable output performance under the mismatch of the system parameters and load conditions. For the robust output response, the controller parameters will be estimated by a model reference adaptive technique where the disturbance torque and flux linkage are estimated. The adaptation laws are derived by the Popov's hyperstability theory and positivity concept. The proposed control scheme is implemented on a BLDC motor using the software of DSP TMS320C30 and the effectiveness is verified through the comparative experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.406-411
• /
• 1993

A variable structure control scheme that can be applied to the process with input/output delays are proposed and its control performances are evaluated. The proposed VSCS, which is an output fedback scheme, comprises an integrator for tracking the setpoint and the Smith predictor for compensating the effects of time delay. With The VSCS, the robustness against the parameter variations and external disturbances can be achieved even when the controlled process includes I/O delays. And the desired transient response is obtained by simple adjustment of the coefficients of the switching surface equation.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.6
• /
• pp.1-11
• /
• 1998

This paper presents performance analyses of three types of the cylindrical-type ER(electro-rheo-logical) valves, which have different electrode length and width but same electrode area. Following the composition of silicone oil-based ER fluid, the field-dependent yield stresses are obtained from experimental investigation on the Bingham property of the ER fluid. The ER valve which is dependent on the applied electric field is devised and its theoretical model is derived. On the basis of the pressure-drop analysis, three types of the ER valves are designed and manufactured. After experimentally evaluation field-dependent pressure drops, PI controller is formulated to achieve tracking control on desired pressure drop. The controller is then experimentally implemented and tracking control performance is presented in order to demonstrate superior controllability of the ER valve. In addition, the response characteristic of the ER valve with respect to the excitation frequency of the electric fiedls is provided to show the feasibility of practical application.

• International Journal of Automotive Technology
• /
• v.7 no.7
• /
• pp.803-812
• /
• 2006

In order to reduce the negative effects of dynamic coupling among vehicle subsystems and improve the handling performance of vehicle under severe driving conditions, a vehicle chassis control integration approach based on a main-loop and servo-loop structure is proposed. In the main-loop, in order to achieve satisfactory longitudinal, lateral and yaw response, a sliding mode controller is used to calculate the desired longitudinal, lateral forces and yaw moment of the vehicle; and in the servo-loop, a nonlinear optimizing method is adopted to compute the optimal control inputs, i.e. wheel control torques and active steering angles, and thus distributes the forces and moment to four tire/road contact patches. Simulation results indicate that significant improvement in vehicle handling and stability can be expected from the proposed chassis control integration.