• Korean Journal of Organic Agriculture
• /
• v.21 no.3
• /
• pp.381-389
• /
• 2013

In order to study the effect of organic fertilizer on dry matter (DM) yield, nitrogen fixation and transfer from pea to barley, an experiment was carried out from May to June in 2008 in Incheon. A completely randomized block design with three replications was used for the experiment and one reference plot assigned each treatment for nitrogen fixation evaluation. Seeding mixture was 40kg barley and 80kg pea per ha. N rate of 40, 80 and 120kg/ha as organic fertilizer was applied at seeding. The equivalent of 1kg per ha as $(15NH_4)_2SO_4$ Solution at 99.8 atom N was applied to the plots ($30{\times}20cm$) at mid April. Forage was harvested from each plot in ripening stage at ground level and separated into barley and pea. Nitrogen fixation was 32.4%, 23.4% and 0% at three different organic N levels. Transfer rate were from 47.6% to 21.8% in difference method and 24.6% and 21.4% on $^{15}N$ dilution method. N Transfer amount were from 92.8kg/ha to 41.9kg/ha on difference method and 47.3kg in the 40kg N plots and 49.7kg in the 80kg N plots on $^{15}N$ dilution method but there was no N transfer in 120kg N organic fertilizer plots. Benefit from increased organic fertilizer was not clear in terms of nitrogen fixation and transfer from pea to barley in barley and pea mixtures.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.421-422
• /
• 2011

The first part is about development of a liquid target for a neutron source, which is designed to overcome many of the limitations of traditional beam-target neutron generators by utilizing a liquid target neutron source. One of the most critical aspects of the beam-target neutron generator is the target integrity under the beam exposure. A liquid target can be a good solution to overcome damage to the target such as target erosion and depletion of hydrogen isotopes in the active layer, especially for the one operating at high neutron fluxes with no need for water cooling. There is no inherent target lifetime for the liquid target neutron generator when used with continuous refreshment of the target surface exposed to the energetic beam. In this work, liquid target containing hydrogen has been developed and tested in vacuum environment. Potentially, liquid targets could allow a point neutron source whose spatial extension is on the order of 1 to $10{\mu}m$. And the second is about the vacuum ultraviolet (VUV) spectrometer which is designed as a five-channel spectral system for ITER main plasma measurement. To develop and verify the design, a two-channel prototype system was fabricated with No. 3 (14.4 nm~31.8 nm) and No. 4 (29.0 nm~60.0 nm) among the five channels. For test of the prototype system, a hollow cathode lamp is used as a light source. The system is composed of a collimating mirror to collect the light from source to slit, and two holographic diffraction gratings with toroidal geometry to diffract and also to collimate the light from the common slit to detectors. The two gratings are positioned at different optical distances and heights as designed. To study the appropriate detector for ITER VUV system, two different electronic detectors of the back-illuminated charge coupled device and the micro-channel plate electron multiplier were installed and the performance has been investigated and compared in the same experimental conditions. The overall system performance was verified by measuring the spectrums.

• Journal of Engineering Education Research
• /
• v.9 no.1
• /
• pp.20-31
• /
• 2006

To enhance the competitiveness of the engineering college through cultivating market-oriented engineering students and to overcome the current 'science/engineering evasion' phenomena, this study proposes an engineering-management course and a strategy for its design and operation. Management ability and leadership is now a necessity for engineering students who will lead the society with their innovative science technology, yet such capacities can only be enhanced by providing a well organized engineering-management program. This study intends to introduce and propose development plans for Yonsei University College of Engineering's 'Techno-Yonsei' undergraduate engineering-management program. CEO's with an engineering background are increasing and in a society where cutting-edge technology is regarded as an invaluable asset, and where development and application of such technology is recognized as the key to securing competitiveness, the roles of 'engineering minded' CEO's are becoming indispensable. This study is significant in that it presents both the need and solution for a market-oriented engineering-management program in accordance to the social demands.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.1
• /
• pp.1-6
• /
• 2005

With recent interest organic farming the use of legumes including vetch and clover to provide N to adjacent crops is increasing in Korea. In the present studies, we conducted a trial to investigate the effects of the application of N rate on nitrogen fixation and transfer from vetch to barley in mixed stands. The experiment was arranged in a randomized complete block design with three replications. Four different N rates(0, 75, 113 and 150/ha) was used and vetch+barley was broadcasted manually on 1.5 $\times$2 m plot in Oct. 2001. Half of urea and K$_{2}O, 200 Phosphate and 75 kg potash per ha were applied as basal dressing md half of N md 75 potash were used for topdressing to soil surface on MarctL 2002. The equivalent of 1kg ha$^{-1}$ at($^{15}$NH$_{4}$)$_{2}$SO$_{4}$ solution at 99.8 atom $\%$$^{15}$N excess was applied to the microplot in mid April. Forage was harvested from each plot at ground level and separated into barley and vetch. Total N content and It values of samples were determined using a continuous flow stable isotope ratio mass spectrometry(IsoPrime-EA. Micromass, UK.). The percentage of legume H fixed from atmospheric N2 were 95.0, 93.8, 94.4 and $84.8\%$ with increment of N levels. The percentage of N transfer from vetch to barley by N-difference method with increment of N fertilizer were from 58 to$49\%$ while 39 to $23\%$ in $^{15}$N-dilution method. The amount of transfer from vetch to barley were 87 to 68 kg/ ha with N level by N-difference moth여 and 58 to -56/ha with N application levels by $^{15}$N dilution method. The amount of nitrogen fixation per ha were from 150 kg / ha to 219 kg / ha by different method, but on the other side 49 to 105kg/ha by N$^{15}$-dilution.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.8
• /
• pp.21-29
• /
• 2012

At-rest lateral stress coefficient that is used for the evaluation of geotechnical structures such as foundations and retaining walls plays a significant role in the analysis and design, as a state variable of in-situ stress condition. In the widely applied Jaky's Ko equation stress condition can be inferred from the internal friction angle obtainable from the laboratory experimentation whereas the eguation mares it challenging to evaluate the influences and criteria of particle characteristics which is essential for the application of friction angles in practices. Thus, this study experimentally explored the behaviors of Ko depending on the relative density, particle shape, and surface roughness effect during a range of loading stages. The Ko values of Jumumjin sand, glass beads, and etched glass beads were measured using a customized Ko device housing strain gauges during loading-unloading-reloading steps, and the effect of dominant factors on Ko is analyzed. Results show that the high Ko prevails for both round and angular specimens with low relative density and the surface roughness has a nominal effect. The angular particles exhibit low Ko for specimens with similar relative density. The characteristics of relevance between Ko and friction angles with varying relative density are also investigated based on the experimental results using empirical correlations and previously reported values.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.4
• /
• pp.35-45
• /
• 2013

Facility Management is the longest in the building of life cycle. Because it occupies more than 80% of cost, the phase of Facility Management has to be managed and has to be perceived as important as design and construction phase. The method to manage building more efficiently is the introduction of Facility Management System used by CAD and database. But information Requirement is now input by hand in the most Facility Management System. This study aims to analyze the example of applying BIM in the Korea or abroad and the errors of this were deducted by many phase. Lastly, the possible solution is suggested in order to be used in the Facility Management System. This study's benchmarking is COBIE which is developed by the COE(Corps of Engineers) and now popular in the world. The suggestion in this study is the method that I have already mentioned is helpful for a designer to do modeling when a designer uses BIM S/W(software). To be more specific, the method plays a side role in helping data input considering the phase of Facility Management.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.6
• /
• pp.13-22
• /
• 2006

The geotextile have been used in filtration and drainage for over 30 years in many applications of civil and environmental projects. Geotextile tube is compound technology of filtration and drainage property of geotextile. Geotextile have been used for various types of containers, such as small hand-filled sandbags, 3-dimensional fabric forms for concrete paste, large soil and aggregate filled geotextile gabion, prefabricated hydraulically filled containers, and other innovative systems involving containment of soils using geotextile. They are hydraulically filled with dredged materials. It have been applied in coastal protection and scour protection, dewatering method of slurry, and isolation of contaminated material. Recently, geotextile tube technology is no longer alternative construction technique but suitable desired solution. This paper presents the behavior of geotextile tube composite structure by 2-D limit equilibrium and plane strain analysis. 2-D limit equilibrium analysis was performed to evaluate the stability of geotextile tube composite structure for the lateral load and also the plane strain analysis was conducted to determine the design and construction factors. Based on the results of this paper, the three types of geotextile tube composite structure is stable. And the optimum tensile strength of geotextile is 151kN/m and maximum pumping pressure is 22.7kN/m.

• Korean Chemical Engineering Research
• /
• v.48 no.6
• /
• pp.791-794
• /
• 2010

This study presents channel design of a CDI stack to achieve high removal efficiency in a large scale by applying parallel flow structure with a concentrated stream. The flow pattern in the stack was simulated by COMSOL Multiphysics program. To prove the salt removal performance, a unit cell and 20 cell stacks were tested at a flow rate condition of 18 ml/min and 360 ml/min, respectively. The removal efficiencies of the unit cell and the 20 cell stacks were obtained as 70.8 % and 75.6 %, respectively, with 100 mg/L sodium chloride solution. During the operation of cell test, water pressures of unit cell and 20 cell pair stack maintained in the ranges of 1.1 psi and 1.3~1.5 psi, respectively. It was demonstrated that the parallel cell structure with two concentrated streams can be employed in a large scale CDI for salt removal.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.4
• /
• pp.85-93
• /
• 2011

A parametric study is conducted for the design of segmented arc plasma torch with the input power and current of 0.4 MW and 300 A, respectively. For this purpose, we use the analytical relationship between input power, current condition, plasma temperature, inner diameter (R) and length (L) of the torch constrictor based on arc channel model. The results reveal that arc plasma temperatures increase monotonically as ��L increases or R decreases for the ranges of R ${\leq}$ 7.5 mm and L ${\leq}$ 1.25 m. For larger valuse of ��R and L than 7.5 mm and 1.25 m, respectively, however, they show non-linear behavior corresponding to the variations of ��L, which stands for the generation of unstable arc plasma. From this parametric study, optimum ranges of R and L are suggested as 5.5 mm ${\leq}$ R ${\leq}$ 7.5 mm and 0.25 m ${\leq}$ L ${\leq}$ 0.5 m for 0.4 MW class segmented arc plasma torch, under which stable arc plasma can be achieved at the input currents of ~300 A.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1987.05a
• /
• pp.6-6
• /
• 1987

만성중이염은 현재 그 빈도가 줄어드는 추세에 있으나 아직도 이과 영역에서 큰 비중을 차지하는 질환이다. 또한 청력개선, 정상구조의 보존, 병변 제거의 목적을 위하여 대부분 수술적 요법이 필요하게 된다. 이에 저자들은 본 병원에서 시행한 만성 중이염 451예, 남자 238예, 여자 213예. 진주종성 중이염 170예, 비진주종성 중이염 273예에 대한 수술시 소견에 대한 임상 통계적 관찰을 한 바, 다음과 같은 결과를 얻었다. 1) 관찰대상을 술식별로 분류하면 진주종성 중이염과 비진주종성 중이염의 비가 $\circled1$ Myningoplasty ; 19.1% : 0%, $\circled2$ Tympanoplasty without mastoidectomy ; 34.5% : 14.4%, $\circled3$ Tympanoplasty with mastoidectomy ; 3.0% :12.1% 이었다. 2) 고막천공부위는, 진주종성 중이염과 비진주종성 중이염의 비가 변연부천공이 10.1% : 5.5%, 상고실천공이 38.8% : 1.4%, 중심부천증이 12.9% : 47.3%, 전천공이 32.5% : 39.6%, 고막유착이 5.6% : 6.2% 을 보였다. 3) 이소골의 상태는 진주종성중이염과 비진주종성 중이염의 비가, 모든 이소골의 손실은 26.6% : 4.3%, 모든 이소골이 정상에 가까운 예는 16.6% : 69.3%, 가장 병변이 심했던 침골 이상은 76.9% : 24.8% 를 보였다. 4) 중이강 점막소견은 진주종성 중이염과 비진주종성 중이염의 비가, 정상에 가까운 예가 16.7% : 47.0%, 병적 소견을 보인 예가 83.3% : 53.0% 이었다. 5) 진주종성 중이염과, 비진주종성 중이염에서의 안면신경관노출은 2.2% : 0.3%, 뇌막노출은 9.5% : 2.9%, 횡정맥동노출은 5.0% : 1.1%, 미로누공은 1.7% : 0% 이었다.lant, engineering service business can be said "The Software of Total Industry." Engineering service is what is called a higher business which offers specialized engineering know-how and experience. Engineering service compaines offer Its specialized knowledge and experience to government, industry and commerce. Whether the task is to modernize plant equipment, to design a building or to manage construction, an engineering company will develop and implement the most appropriate and cost effective solution. Clients use the engineering service of firm knowing that the engineer′s professional judgement is not influenced or biased by other commercial affiliations. While benefiting from the diverse experience that professional engineers can apply to a specific problem, government and industry also reduce the need for permanent in-house engineering staff. Engineering firms may be specialized or multi-disciplinary.도말표본에서와 같이 제 14 일 이전에는 호중구가, 그 이후에는 단핵구가 주종을 이루었다.>18.9dB