• 한국농공학회지
• /
• 제32권4호
• /
• pp.45-52
• /
• 1990

Government has propelled strongly the Agricultural - cum - Industrial region development project in the nation wide. This project will not only provide employment opportunity for rural inhabitants, but also be designed to activate the rural economy. In addition, it will lead to a balanced development between the urban and rural areas. Under this project, building sites of 3 to 30 hactres will be established in the rural area in order to settle factories which are suitable to the rural condition. In this report, the researches which relating to the achievement conditions of planning, design and constructions of the building sites and the contribution conditions of Agri. - cum - Industrial Region development projects, activated to the rural economy and regional development in the Kyungpook regional areas, were surveyed and studied. On the average evaluation studies the results are as follows : 1. The achievement conditions of the planning, design and construction of the building sites. Very good 27.0 % Good 47.0 % Fair 24.0 % Poor 2.0 % 2. The contribution conditions of the Agri - cum - Industrial factories managements. Very good 17.0 % Good 41.0 % Fair 32.0 % Poor 10.0 %

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.39-41
• /
• 2004

This paper demonstrates the in-house development of the subsystem C&DH in a D-SAT satellite project of Astronautic Technology (M) Sdn. Bhd. (ATSB). D-SAT is a non-imaging satellite. It will carry a dosimeter as the payload for scientific objectives. Since one of the D-SAT project establishment intended objectives is to demonstrate the research and development skill of the ATSB engineers on the satellite system building, most of the subsystems of the D-SAT are developed in-house including the C&DH subsystem. C&DH subsystem plays an important role for managing data handling tasks and general operation of the satellite system. The C&DH development includes the research and study on the hardware and software design, the design of both the hardware and software, the development of the software system, the integration between the software and the hardware system and the implementation of the subsystem into the satellite system. This program allows ATSB to accomplish the engineers with expertise not only in the C&DH subsystem but other subsystems too besides developing knowledge in the management of a space project that covers not only on the technical issues but issues relating to the economic, political and legal issues.

• 한국건축시공학회지
• /
• 제12권6호
• /
• pp.674-681
• /
• 2012

With the rise in the functions required in modern building structures, the role of the building equipment that maintains the functions of a building has been emphasized and increased. Effective management in this area is only possible when the construction manager (CMr) is qualified and has the knowledge of building equipment that is needed. Therefore, in this study, a questionnaire survey was carried out on equipment engineers and CMrs, in order to determine the level of building equipment knowledge required, and to identify the perception level of CMrs about the building equipment in the construction project at the project design stage. The results of this study revealed that the CMrs surveyed had a lower level of knowledge on the building equipment than the level that was desired by the equipment engineers. This indicates that CMrs currently have a weak capacity for the management of building equipment. It is thus necessary for CMrs to undergo systematic training in order learn more about building equipment and thus be able to manage construction projects more efficiently.

• 컴퓨터교육학회논문지
• /
• 제13권6호
• /
• pp.43-52
• /
• 2010

본 논문에서는 사고력 신장 도구를 활용한 프로젝트 학습 모형을 구안하고, 컴퓨터일반 교과목에 포함된 정보통신윤리 단원의 수업 설계에 반영하였다. 이를 전문계 고등학생의 수업에 적용하고 심층적 면담을 실시한 결과, 학생들의 정보통신 윤리의식, 특히 통신예절, 통신언어, 저작권 등에 긍정적인 변화가 일어난 것을 확인할 수 있었다. 또한, 수업 적용 후의 양적 연구 결과에서도 제안된 프로젝트 학습 모형이 학생들의 학업적 자기효능감을 향상시킨 것으로 나타나 전문계 고등학교의 정보통신윤리 교육에 효과적으로 활용될 수 있음을 보였다.

• 한국BIM학회 논문집
• /
• 제7권2호
• /
• pp.16-24
• /
• 2017

It is very important to estimate accurate construction total cost needed early in the project. In the initial phase of the design, the project cost estimates are determined by total quantity from design documents and the variables that affect the calculation of the total cost of the project. In order to determine accurate total construction cost, the contractor has to produce detailed quantity information based on the drawings and specifications. The process of preparing quantification and cost estimation documents is still being worked out manually, and a lot of errors have been occurred in many cases. Recent advances in information technology have led to the BIM based quantity takeoff and cost estimation. However, there are some limits to the extent to which the current specifications for BoQ documents are computed from BIM model. This research analyze the current BoQ cases and analyze how to make quantity takeoff possible through BIM. The study defined five levels of quantity category that could be produced by BIM. Only about 40% or indirectly usable items can be used when information is extracted to BIM modelling. This is very insufficient to fill out the BoQ. The BoQ document structure quantity takeoff specifications should be simplified in order to BIM based cost estimation more efficiently.

• Journal of Forest and Environmental Science
• /
• 제34권4호
• /
• pp.352-358
• /
• 2018

This research paper investigates available options for implementing clean development mechanism (CDM) project in Sarawak state, Malaysia. To investigate economic feasibility, data was collected using survey and field research methods. Also, economic analysis was estimated using net present value (NPV), internal rate of return (IRR) and payback period (PBP) during the 30 years CDM: afforestation and reforestation periods. The result of economic analysis indicated that, the payback period was estimated at 9 years with 18 percent of internal rate of return (IRR). This study also highlighted that CDM biomass supply project have a lot of challenges due to the reduction and exclusion of bio-Solid Recovered Fuel (SRF), supply and demand scenario, and impact of restriction of illegal logging in Malaysia. This study results demonstrate the methodology and guideline for future CDM investment and projects.

• Journal of Construction Engineering and Project Management
• /
• 제3권4호
• /
• pp.20-25
• /
• 2013

Variation in construction means modification of design, changes in quality, quantity of work including the alteration of standard of materials or goods to be used in the work and the removal from site any kind of material not in accordance in the contract. In Ghana, Variation order has become major issue in the construction industry. This had resulted in cost overruns, delay and in some contracts dispute, between parties. The aim of this paper was to identify the root causes of variation; effects of variations on projects in Ghana and the means of reducing the impact of variation order. The method of the study involved literature review, primary data collection, interview and closed - ended- questionnaires. Mean Scores Method was used to rank the identified factors causing variation. Analysis Of Variance Test was use to test for the significant difference between means among the professional groups. The study revealed that most causes of variation were change of design by client and inadequate working details. Establishment of oversight project management committee and flow of information were identified as means of controlling variations during project administration.

• 한국의상디자인학회지
• /
• 제11권1호
• /
• pp.123-132
• /
• 2009

Our government has declared the "Synthetic Project for Promoting Han-style" to industrialize and globalize the original form of Korea traditional culture. Han-bok, our traditional folk costume is one of the main subject of this project. However it is the global trend not to wear their traditional folk costume. And so, the number of people wearing Han-bok, our traditional folk costume is also getting gradually decreased in Korea. For Han-style Promoting Project in the future, it is one of the most efficient way for the middle and high school students to motivate and increase the interest about Han-style and Han-bok as the middle and high school uniforms. Adolescent middle and high school students think very important their appearance. Especially, Korean middle and high school students spend a lot of time in school, and so school uniforms are very influential in their mental and physical aspects. Fabrics for this study, they were woven twill with 3 kinds of fabric patterns from the motif of Baekje relics. The colors of fabrics is the blue and brown used in general school uniform, the yellow and red used in Han-bok. Considering the school uniforms, fabric patterns adapted the similar color matching method for not to be found cleary and designed the fabric pattern's one-repeat size is $4{\times}4cm$.

• 터널과지하공간
• /
• 제19권2호
• /
• pp.71-76
• /
• 2009

GK침매터널은 침매터널공법으로는 국내 최초이다. 국내 시공사례의 부재, 최대 수심 약 50m에서 이루어지는 침매함체 연결 및 연약지반 등 시공상 많은 어려움에도 불구하고 현재 여덟 개의 침매함체가 성공적으로 시공되었으며 올해 안에 열 두번째 함체까지 시공될 예정이다. 본 논문의 목적은 GK 침매터널에 대한 설계 및 시공 조건을 유사 프로젝트를 수행하는 터널공학자들에게 소개하여 용이하게 프로젝트를 수행할 수 있게 하기 위함이다.

• 한국측량학회지
• /
• 제13권1호
• /
• pp.49-59
• /
• 1995

본 연구는 농업용수 개발사업의 기초조사와 기본계획 및 실시설계 과정에 수치지형정보를 활용함으로써 농업용수 개발사업의 경제적이고 합리적인 추진에 기여함을 목적으로 한다. 본 연구에서는 대상지역의 수치지형정보를 취득하기 위해 항공사진을 이용하였으며, 이를 보간하여 대상계획에 적합한 수치표고모형을 생성함은 물론, 관련도형정보 및 속성자료를 이용하여 농업용수 개발사업의 기초조사용 데이터 베이스를 설계하였다 본 연구의 수행결과, 본 연구에서 정 저한 방법이 농업용수 개발사업의 효율적 인 수행에 기여함을 알 수 있었다.