• International Journal of CAD/CAM
• /
• v.5 no.1
• /
• pp.19-27
• /
• 2005

As three-dimensional range scanners make large point clouds a more common initial representation of real world objects, a need arises for algorithms that can efficiently process point sets. In this paper, we present a method for extracting smooth surfaces from dense point clouds. Given an unorganized set of points in space as input, our algorithm first uses principal component analysis to estimate the surface variation at each point. After defining conditions for determining the geometric compatibility of a point and a surface, we examine the points in order of increasing surface variation to find points whose neighborhoods can be closely approximated by a single surface. These neighborhoods become seed regions for region growing. The region growing step clusters points that are geometrically compatible with the approximating surface and refines the surface as the region grows to obtain the best approximation of the largest number of points. When no more points can be added to a region, the algorithm stores the extracted surface. Our algorithm works quickly with little user interaction and requires a fraction of the memory needed for a standard mesh data structure. To demonstrate its usefulness, we show results on large point clouds acquired from real-world objects.

• The KIPS Transactions:PartA
• /
• v.11A no.3
• /
• pp.109-114
• /
• 2004

Increasing popularity of WLAN and advancement of WPAN allow user to connect to the Internet easily today. The increasing of number of networking mobile device such as laptop and PDA requires computing devices to share high speed Internet line or work on networks in most cases. This has stimulated the demand of access point that supports multiple network interfaces. This paper describes the process of design, implementation and test of the wired/wireless integrated access point that supports multiple network interfaces such as wired LAN, wireless LAN, Bluetooth, and Broadband network. We designed and developed the hardware system and protocol software to integrate heterogeneous network. The system has shown compatibility with standard specification and good performance through testing with various network devices.

• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.929-936
• /
• 2004

A major limitation of available component-based platforms Is that they do not provide suitable means for describing and reasoning on the concurrent behaviour of interacting component-based system. Indeed while these platforms provide convenient ways to describe the typed signatures of components, e.g. like CORBA's IDL, they offer a quite low-level support to describe the concurrent behaviour of component. The ability to describe and verify the concurrent behaviour of interacting components is key aspect In the development of large component-based software system. This study propose a component interface specification using process algebra and configuration's role which allows one to prove correctness of software architecture generated at design level as well as to define compatibility relations by our evolution rule and $\pi$-graph. Also, we shown on an appropriateness of a specification techniques and definitions proposed in this paper by case-study.

• Journal of Information Display
• /
• v.3 no.2
• /
• pp.1-5
• /
• 2002

A CMOS driving circuit for active matrix type polymer electroluminescent displays was designed to develop an on-chip microdisplay on the single crystal silicon wafer substrate. The driving circuit is a conventional structure that is composed of the row, column and pixel driving parts. 256 gray scales were implemented using pulse amplitude modulation method. The 2-transistor driving scheme was adopted for the pixel driving part. The layout was carried out considering the compatibility with the standard CMOS process. Judging from the layout of the driving circuit, it turns that it is possible to implement a high-resolution display about 400 ppi resolution. Through the HSPICE simulation, it was verified that this circuit is capable of driving a VGA signal mode display and implementing 256 gray levels.

• Journal of Sensor Science and Technology
• /
• v.21 no.2
• /
• pp.83-89
• /
• 2012

A simple array of metal-insulator-metal capacitive elements was proposed for a potential application in humidity sensing platforms. We fabricated meso-scale sensors with different sizes(large-size: $2.7{\times}2.7mm^2$ ; mid-size: $1.5{\times}1.5mm^2$ ; small-size: $0.7{\times}0.7mm^2$) and characterized the performance of each design. Polyimide films were utilized as a humidity-sensitive layer. Capacitance changes of the polyimide layer were measured with respect to water absorption. The device showed sensitivity in the full range of relative humidity (RH) with excellent linearity(correlation coefficient > 0.994). This array structure exhibits unique advantages including easy fabrication process, high batch productivity, and high structural compatibility with various substrate materials. It is anticipated that this device structure will be potentially useful in unique applications including mapping spatial humidity variations over a meso-scale area and implementing flexible humidity sensing element arrays.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.62-71
• /
• 1999

Integrating micro-machined sensors and actuators on the conventional devices with the copper power lines was incompatible to fabricate the mass produced micro electromechanical system (MEMS) devices. To achieve the compatibility of the wiring method between MEMS parts and devices, we developed the three-dimensional sputter-evaporation system that coats micropatterned thin copper films on the surface of the MEMS element. The system consists of a process chamber, two branch chambers, the substrate holder, and a linear-rotary motion feedthrough. Thin copper film was sputtered and evaporated on the biocompatible polymer, Pellethane$^{circed{R}}$ and silicone, catheter that is 2 mm in diameter and 700 mm in length. The metal film coating technique with three-dimensional thin film sputter-evaporation system was developed to apply the power and signal lines on the micro active endoscope. In this paper, we developed the three-dimensional metal film sputter-evaporation system operated on the low temperature for the biopolymeric substrates used in the medical MEMS devices.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.4
• /
• pp.243-251
• /
• 2009

Refrigerant mixtures provide an opportunity to adjust their properties to fit design criteria and a possibility to create new blends that can improve heat transfer characteristics. Therefore, mixture of $CO_2$ and propane is chosen which may be a promising refrigerant and has good environmental compatibility. This paper presents measured heat transfer coefficient data during evaporation process of $CO_2$/propane mixtures flowing upward in vertical smooth and. micro-fin tubes. Smooth and micro-fin tubes with outer diameters of 5 mm and length of 1.44in were selected as test tubes. The tests were conducted at mass fluxes of 212 to $656kg/m^{2}s$, inlet temperatures of -10 to $30^{\circ}C$, heat fluxes of 15 to $60\;kW/m^2$ and for several compositions (75/25, 50/50, 25/75 wt%). Among $CO_2$/propane refrigerant mixtures, the heat transfer characteristics are much better than that of any compositions when the composition is 75/25 (wt%).

• Journal of Fashion Business
• /
• v.25 no.3
• /
• pp.108-125
• /
• 2021

The purpose of this study is to analyze the technical pattern and product characteristics of outdoor sportswear marketed in Northern Europe and North America. Based on the results of this study, we wanted to provide practical data on the characteristics of products with high functionality and fashionability for developing outdoor sportswear. Therefore, in this study, technical pattern, textiles, details, sewing, compatibility with wearable devices, and certification of 33 marketed outdoor sportswear were analyzed. After analyzing various technical patterns, the bent arm pattern using two-piece panel and a raised arm pattern connecting the side seam with the inner seam of the sleeve appeared on the top. Additionally, the patterns of bent legs with darts in the knee, cutting the posterior, and inserting the gusset in the crotch were mainly seen in the bottoms. By analyzing product characteristics, ergonomic pattern design for easy activity and functional materials was used for climate adaptation in extreme outdoor wear. On the other hand, for outdoor wear meant for trekking or hiking, details, such as portability and easy storage, were considered. Eco-friendly materials were used while ensuring light weight and comfort. Furthermore, for convenience of life, safety, and health, wearable devices were integrated into the outdoor sportswear. Eco-friendly green certification of outdoor products was obtained for the labor environment and production process, and relevant information was provided to consumers.

• Advances in concrete construction
• /
• v.16 no.4
• /
• pp.217-230
• /
• 2023

Methods for designing the post-tensioned anchorage zones at ultimate limit state has been specified in current design codes based on strut-and-tie models (STM). However, it is still not clear how to estimate the serviceability behavior of the anchorage zones. The serviceability is just indirectly taken into account by means of the reasonable reinforcement detailing. To address this issue, this paper is devoted to developing a modified strut-and-tie model (MSTM) to predict the behavior of concentric anchorage zones throughout the loading process. The principle of stationary complementary energy is introduced into STM at each load step to satisfy the compatibility condition and generate the unique MSTM. The structural behavior of anchorage zones can be achieved based on MSTM from loading to failure. Simplified formulas have been proposed to estimate the first cracking load, bearing capacity and maximum crack width with the consideration of the details of reinforcement bursting bars. The proposed model provides a definite method to control the bursting crack width in concentric anchorage zones. Four specimens with different bearing plate ratios have been designed and tested to validate the proposed method.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.1
• /
• pp.24-34
• /
• 2015

As recent multilateral collaboration design system has been advanced, BIM based data exchange is a key factor for successful next generation building project. Even though many studies have been trying to set up a data compatibility system for collaboration, There are still a lot of problem in data exchange between design and engineering phase. Therefore, In this study, we analysis causes of problem for information exchange and suggest a IFC based Information exchange framework for improving BIM based design collaboration environment. In order to find out problems that hinder establishment of advanced open BIM information exchange, proper analysis about transition of process from current and to-be BIM based design collaboration process is important, at first. From analysis of main obstacles to information exchange, this research suggests solution plan using open API and IFC based BIM collaboration supporting system. The suggested open API solution named Integrity feedback system perform a role making up for weak point derived from IFC based data exchange. And main system suggestion about framework for IFC based information exchange reflect technological system support, requirement of function for collaboration including API/BCF plug-in.