• Title/Summary/Keyword: Design effect

Search Result 19,144, Processing Time 0.051 seconds

Optimal Designs of Urban Watershed Boundary and Sewer Networks to Reduce Peak Outflows (첨두유출량 저감을 위한 도시유역 경계 및 우수관망 최적 설계)

  • Lee, Jung-Ho;Jun, Hwan-Don;Kim, Joong-Hoon
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.11 no.2
    • /
    • pp.157-161
    • /
    • 2011
  • Although many researches have been carried out concerning the watershed division in natural areas, it has not been researched for the urban watershed division. If the boundary between two urban areas is indistinct because no natural distinction or no administrative division is between the areas, the boundary between the urban areas that have the different outlets (multi-outlet urban watershed) is determined by only designer of sewer system. The suggested urban watershed division model (UWDM) determines the watershed boundary to reduce simultaneously the peak outflows at the outlets of each watershed. Then, the UWDM determines the sewer network to reduce the peak outflow at outlet by determining the pipe connecting directions between the manholes that have the multi-possible pipe connecting directions. In the UWDM, because the modification of the sewer network changes the superposition effect of the runoff hydrographs in sewer pipes, the optimal sewer layout can reduce the peak outflow at outlet, as much as the superposition effects of the hydrographs are reduced. Therefore, the UWDM can optimize the watershed distinction in multi-outlet urban watershed by determining the connecting directions of the boundary-manholes using the genetic algorithm. The suggested model was applied to a multi-outlet urban watershed of 50.3ha, Seoul, Korea, and the watershed division of this model, the peak outflows at two outlets were decreased by approximately 15% for the design rainfall.

Developed an output device for high-frequency cosmetic medical equipment using micro multi-needle (마이크로 멀티니들을 이용한 고주파 피부미용 의료기기를 위한 출력 장치 개발)

  • Kim, Jun-tae;Joo, Kyu-tai;Cha, Eun Jong;Kim, Myung-mi;Jeong, Jin-hyoung
    • The Journal of Korea Institute of Information, Electronics, and Communication Technology
    • /
    • v.14 no.5
    • /
    • pp.394-402
    • /
    • 2021
  • The entry of an aging society and the extension of human life expectancy, the increasing interest in women's social advancement and men's appearance, and the natural interest in K-culture through media media, while receiving worldwide attention, Focus on K-Bueaty. Recently, looking at the occupation of the medical tourism field, in the case of aesthetic medicine tourism such as molding and dermatology, it has gained popularity not only in Asia such as China and Japan, but also in North America and Europe. The first external confirmation of human aging is the wrinkles on the skin of the face. Clean, wrinkle-free, elastic and healthy skin is a desire of most people. Skin condition and condition such as focused ultrasonic stimulation (HIFU: High Intensity Focused Utrasound) and low frequency, high frequency (RF: Radio Frequency), galvanic therapy using microcurrent, cryotherapy using rapid cooling, etc. Depending on the method of management, the effect of the treatment differs depending on the output and the stimulation site, etc., even in the treatment of medical equipment and beauty equipment using the same mechanism. In this research, in order to develop invasive high-frequency dermatological devices using a large number of beauty medical devices and microneedles of beauty devices, the international standards IEC 60601-2 (standards for individual medical devices) and MFDS (Ministry of) We designed and developed a high-frequency output device in compliance with the high-frequency stimulation standard announced in the Food and Drug Safety (Ministry of Food and Drug Safety). The circuit design consists of an amplifier (AMP: Amplifier) using Class-A Topology and a power supply device using Half-Bridge Topology. As a result of measuring the developed high-frequency output device, an average efficiency of 63.86% was obtained, and the maximum output was measured at 116.7W and 50.67dBm.

Basic Study for Selection of Factors Constituents of User Satisfaction for Micro Electric Vehicles (초소형전기차 사용자만족도 구성요인 선정을 위한 기반연구)

  • Jin, Eunju;Seo, Imki;Kim, Jongmin;Park, Jejin
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.41 no.5
    • /
    • pp.581-589
    • /
    • 2021
  • With the recent increase in the introduction of micro-electric vehicles in Korea, interest in micro-electric vehicle user satisfaction is increasing to revitalize related markets. In this paper, a basic study was conducted on the development of public services using micro-electric vehicle based on the constituent factors of user satisfaction. The survey includes: ① 'Analytic Hierarchy Process (AHP) for selecting the priority factors of user satisfaction of micro-electric vehicles', ② 'A survey of micro-electric vehicles image' to collect data in advance for providing users' preferences and transportation services for micro-electric vehicles, ③ In order to investigate the user satisfaction level of users who actually operated micro-electric vehicles, the order of 'user satisfaction survey of micro-electric vehicle drivers' was conducted. In the Analytic Hierarchy Process (AHP) analysis, it was found that users regarded as important in the order of 'user utilization data', 'vehicle movement data', and 'charging service data'. In the micro-electric vehicle image survey, users perceived micro-electric vehicles more positively in terms of "safety", 'durability', 'Ride comfort', 'design', 'MOOE (Maintenance and other operating expense)', and 'environment-friendly' when comparing micro-electric vehicles with electric motorcycles. In the survey on the user satisfaction of micro-electric vehicle drivers, the use of micro-electric vehicle did not directly affect work performance efficiency, and there was an experience of being disadvantaged on the road due to the size of the micro-electric vehicle, and driving in a cluster of micro-electric vehicle for outdoor advertisements. The city's public relations effect was great, but it was concerned about safety. In the future, based on the results of this study, we plan to build a user satisfaction structural equation model, preemptively discover feedback R&D for micro-electric vehicle utilization services in the public field, and actively seek to discover new public mobility support services.

Comparison of internal and marginal fit of crown according to milling order in a single machinable wax disc (단일 절삭가공용 왁스 디스크 내에서 순차적 절삭가공 순서에 따른 크라운의 내면 및 변연 적합도 비교)

  • Song, Jun-Beom;Lee, Jonghyuk;Ha, Seung-Ryong;Choi, Yu-Sung
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.59 no.4
    • /
    • pp.395-404
    • /
    • 2021
  • Purpose. The purpose of present study was to evaluate the effect of changing structural stability of wax disc on the fit of prosthesis when the milling proceeded in order. Materials and methods. Prepared maxillary left first molar was used to fabricate a Ni-Cr alloy reference model. This was scanned to design crown and then wax pattern was milled, invested and cast to fabricate prosthesis. The wax patterns located in a row centrally within a single wax disc were set into a total of five groups ranging from WM1 group that was first milled to WM5 group that was last milled and the number of each group was set as 10. Silicone replica technique was used to measure the marginal gap, axial internal gap, line angle internal gap, occlusal internal gap. Data was evaluated with one-way ANOVA with significance level set at α = .05 and then Tukey HSD test was conducted for post analysis. Results. Marginal gap measured in each group, it was 40.41 ± 2.15 ㎛ in WM1 group, 40.44 ± 2.23 ㎛ in WM2 group, 39.96 ± 2.25 ㎛ in WM3 group, 39.96 ± 2.48 ㎛ in WM4 group, and 40.57 ± 2.53 ㎛ in WM5 group. No significant difference was found between groups. The significant difference between the groups was also not found in the axial internal gap, line angle internal gap, and occlusal internal gap. Conclusion. Internal and marginal fit of single crown to the sequential order of milling processing in the single machinable wax disc did not seem to be affected by the sequence.

The Effect of Social Capital on Health-related Quality of Life - Using the Data of the 2019 Community Health Survey - (노인의 사회적 자본이 건강 관련 삶의 질에 미치는 영향 - 2019년 지역사회건강조사를 중심으로 -)

  • Kim, Ji-Hee;Park, Jong
    • Journal of agricultural medicine and community health
    • /
    • v.46 no.4
    • /
    • pp.280-294
    • /
    • 2021
  • Objectives: The purpose of this study is to investigate the effects of social capital characteristics, socio-demographic characteristics, physical condition, and health behavior characteristics on health-related quality of life of the elderly in Korea. Methods: T-test, one-way ANOVA, and regression analysis were performed by applying a complex sample design to 57.787 people aged 65 and over using the 2019 Community Health Survey. Results: First, as a result of complex-sample T-test and ANOVA analysis, it was found that there were differences in health-related quality of life according to social capital characteristics, physical condition & health behavior characteristics, and socio-demographic characteristics. Complex Sample Regression Analysis Results, the explanatory power of the model was 28%. When living in the metropolitan area, living in an apartment building, having a spouse, having a higher household income, economic activity, higher educational attainment, increase sleeping time, walking time, frequent binge drinking, health checkup, networking, trust, and social participation showed higher health-related quality of life. When people were older, their gender was female, higher BMI, number of chronic diseases, and severe stress that showed lower health-related quality of life. Conclusions: It was proved that the factors affecting the health-related quality of life of the elderly are not only physical condition and health behavior factors, but also social capital and socio-demographic characteristics. It was found that the role as a member was important.

The Therapeutic Effect of Postganglionic Nerve Block for Symptomatic Schmorl Nodule: A Retrospective Case Series (증후성 쉬모를 결절에 대한 신경절 이후 신경차단술의 치료 효과: 후향적 증례 분석)

  • Son, In Seok;Hwang, Suk Hyun;Lee, Suk Ha;Kang, Min Seok
    • Journal of Korean Society of Spine Surgery
    • /
    • v.25 no.4
    • /
    • pp.147-153
    • /
    • 2018
  • Study Design: Retrospective case series. Objectives: We retrospectively evaluated the clinical efficacy of postganglionic nerve block in symptomatic Schmorl nodules (SNs). Summary of Literature Review: SNs are common lesions that are often asymptomatic. In certain cases, SNs have been reported to cause severe axial back pain, thereby considerably impacting patients' quality of life. No consensus currently exists on the treatment of symptomatic SNs. Materials and Methods: From October 2015 to October 2017, a total of 21 patients with symptomatic SNs diagnosed by magnetic resonance imaging (MRI) that did not respond to conservative treatment after 4 weeks were included in the study. All patients received postganglionic nerve block. We evaluated effective pain relief (improvement of back pain of more than 50% compared with before the intervention) and functional improvements, assessed by visual analogue scale (VAS) and Oswestry Disability Index scores obtained at 4 hours, 4 weeks, 8 weeks, 3 months, and 6 months after the procedure. Results: Symptomatic SNs were more common at the L2-3 level, and the lower end plate was more commonly involved than the upper end plate. Eighteen of the 21 patients (85.7%) showed effective pain relief, and no deterioration was observed within the followup period. Throughout the follow-up period, the VAS remained significantly improved compared to before the procedure (p<0.05). Complications were not reported in any cases. Conclusions: Postganglionic nerve block for symptomatic SNs that do not respond to conservative treatment is a non-invasive modality for pain relief.

A study on the change effect of emission regulation mode on vehicle emission gas (배기가스 규제 모드 변화가 차량 배기가스에 미치는 영향 연구)

  • Lee, Min-Ho;Kim, Ki-Ho;Lee, Joung-Min
    • Journal of the Korean Applied Science and Technology
    • /
    • v.35 no.4
    • /
    • pp.1108-1119
    • /
    • 2018
  • As the interest on the air pollution is gradually rising at home and abroad, automotive and fuel researchers have been studied on the exhaust and greenhouse gas emission reduction from vehicles through a lot of approaches, which consist of new engine design, innovative after-treatment systems, using clean (eco-friendly alternative) fuels and fuel quality improvement. This research has brought forward two main issues : exhaust emissions (regulated and non-regulated emissions, PM particle matter) and greenhouse gases of vehicle. Exhaust emissions and greenhouse gases of automotive had many problem such as the cause of ambient pollution, health effects. In order to reduce these emissions, many countries are regulating new exhaust gas test modes. Worldwide harmonized light-duty vehicle test procedure (WLTP) for emission certification has been developed in WP.29 forum in UNECE since 2007. This test procedure was applied to domestic light duty diesel vehicles at the same time as Europe. The air pollutant emissions from light-duty vehicles are regulated by the weight per distance, which the driving cycles can affect the results. Exhaust emissions of vehicle varies substantially based on climate conditions, and driving habits. Extreme outside temperatures tend to increasing the emissions, because more fuel must be used to heat or cool the cabin. Also, high driving speeds increases the emissions because of the energy required to overcome increased drag. Compared with gradual vehicle acceleration, rapid vehicle acceleration increases the emissions. Additional devices (air-conditioner and heater) and road inclines also increases the emissions. In this study, three light-duty vehicles were tested with WLTP, NEDC, and FTP-75, which are used to regulate the emissions of light-duty vehicles, and how much emissions can be affected by different driving cycles. The emissions gas have not shown statistically meaningful difference. The maximum emission gas have been found in low speed phase of WLTP which is mainly caused by cooled engine conditions. The amount of emission gas in cooled engine condition is much different as test vehicles. It means different technical solution requires in this aspect to cope with WLTP driving cycle.

Effect of the Sowing and Harvesting Dates on the Agronomic Characteristics and Feed Value of Corn and Sorghum×Sorghum Hybrid in Youngnam Mountain Area (영남산간지역에서 옥수수와 수수×수수 교잡종의 파종시기와 수확시기가 조사료 생육 특성과 사료가치에 미치는 영향)

  • Lee, Hyuk-Jun;Joo, Young-Ho;Lee, Seong-Shin;Paradipta, Dimas Hand Vidya;Han, Ouk-Kyu;Ku, Ja-Hwan;Min, Hyeong-Gyu;Oh, Jung-Sik;Kim, Sam-Churl
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.39 no.2
    • /
    • pp.53-60
    • /
    • 2019
  • This study was carried out from 2015 to 2016 to identify the suitable sowing and harvesting dates of summer crops in the mountain of Yeongnam, South Korea. The experimental design consisted of the different sowing and harvesting dates as follows: corn hybrid (Z. mays, Kwangpyeongok) of sowing (May 8, 19, and 27) and harvesting (August 10, 20, and 30); sorghum${\times}$sorghum hybrid (Sorghum bicolor ${\times}$ Sorghum bicolor, SS405) of sowing (May 27, June 19 and June 27) and harvesting (August 10, 20, and 30). In corn hybrid, ear rate and dry matter (DM) yield decreased (p<0.05) with the postponement of sowing date. Otherwise, ear rate and DM yield increased (p<0.05) with the postponement of harvesting date. Crude protein content decreased (p<0.05) with the postponement of sowing date, but neutral detergent fiber content increased (p<0.05). In sorghum${\times}$sorghum hybrid, plant length and DM yield with the postponement of harvesting date increased (p<0.05), while crude protein content with the postponement of harvesting date decreased (p<0.05). This study concluded that sowing corn hybrid in early May and sorghum${\times}$sorghum hybrid in early June then harvest in the middle of August was recommend to increase dry matter yield and feed value.

A study of prostate symptom, sleep quality and quality of life in the community-dwelling korean elderly (남성 노인의 전립선 증상, 수면의 질, 삶의 질에 관한 연구)

  • Shin, Kyung-Rim;Kang, Younhee;Shin, Mee-Kyung
    • 한국노년학
    • /
    • v.28 no.4
    • /
    • pp.1041-1054
    • /
    • 2008
  • This study aimed to identify the severity and types of prostate symptom, to identify the relationship of prostate symptom, sleep quality and quality of life of the elderly in korea, so to provide basic data for developing nursing interventions for the elderly's prostate symptom management. This study used a descriptive correlational research design. The subjects of this study were 100 elderly men over 65yr in an urban city. Data were collected through personal interviews using questionnaires from September 2006 to March 2007. The IPPS, PSQI and SF-36-K were administered. The collected data were analyzed by descriptive statistics and Pearson's correlation. The major findings of this study were as follows: 1) 44% of the participants have moderate to severe Prostate symptom(IPSS>7). 2) Prostate symptom has positive relationship with sleep quality(r=.272, p=.006) and negative relationship with health related quality of life(r=-.197, p=.049). The results of this study indicate that prostate symptom is related to sleep quality and quality of life. So it is necessary to give information to the elderly about the effective coping method of prostate symptom and about the life style which have positive effect to prostate symptom.

The effect of perceived social exclusion on warm lighting preferences (지각된 사회적 배제가 따뜻한 조명 선호에 미치는 효과)

  • Lee, Guk-Hee
    • Journal of the HCI Society of Korea
    • /
    • v.14 no.2
    • /
    • pp.5-12
    • /
    • 2019
  • Social exclusion, which does not fulfill the desire for respect as one of the most basic human desires, makes those who perceive themselves to be socially excluded seek physical warmth. However, very few studies have examined whether this phenomenon-wherein social exclusion develops a preference for warmth-can be generalized to the emotional or symbolic aspects, such as the color of lighting. This study aimed to verify the effects of perceived social exclusion on warm lighting preferences, and two experiments were performed for this purpose. In Experiment-1, participants who were respected by people the previous day were assigned to the group that did not perceive social exclusion (non-perceived social exclusion group), and those who were not respected were assigned to the group that perceived social exclusion (perceived social exclusion group). Following this, their preference for warm lighting (3000K), neutral lighting (4000K), and cold lighting (6000K) was measured. The results showed that the perceived social exclusion group had a stronger preference for warm lighting and a weaker preference for cold lighting than did their counterparts. Moreover, the perceived social exclusion group showed a strong preference for warm lighting over neutral lighting; they also showed a weak preference for cold lighting. In Experiment-2, after assigning the participants into groups as in Experiment-1, the participants' preference for a space with warm lighting, neutral lighting, and cold lighting was measured. The results showed that the perceived social exclusion group had a stronger preference for the space with warm lighting and a weaker preference for cold lighting than did their counterparts. Further, the perceived social exclusion group showed a strong preference for the space with warm lighting over the space with neutral lighting; they also showed a weak preference for the space with cold lighting. The findings of this study have implications that can be applied to designing living spaces for people who experience social exclusion, such as handicapped individuals, multicultural families, or immigrant workers, as well as developing artificial intelligence services and cyber-friend characters for this demographic.