• ETRI Journal
• /
• 제34권6호
• /
• pp.869-878
• /
• 2012

A beam design method based on signal-to-leakage-plus-noise ratio (SLNR) has been recently proposed as an effective scheme for multiuser multiple-input multiple-output downlink channels. It is shown that its solution, which maximizes the SLNR at a transmitter, can be simply obtained by the generalized eigenvectors corresponding to the dominant generalized eigenvalues of a pair of covariance matrices of a desired signal and interference leakage plus noise. Under time-varying channels, however, generalized eigendecomposition is required at each time step to design the optimal beam, and its level of complexity is too high to implement in practical systems. To overcome this problem, a predictive beam design method updating the beams according to channel variation is proposed. To this end, the perturbed generalized eigenvectors, which can be obtained by a perturbation theory without any iteration, are used. The performance of the method in terms of SLNR is analyzed and verified using numerical results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.231-234
• /
• 2002

A transceiver for ADSL systems contains an interpolated combfilter, halfband filters, oversampling sigma delta modulator, a current steering DAC and an analog filler. The circuit complexity of the architecture makes it necessary to use behavioral models to determine the system features. For this reason, we need a specific behavioral simulation environment using the Matlab program. The Matlab is crucial for these circuits to be rapidly incorporated in larger systems, in particular in the context of mixed-signal-test schemes. Design trade-off among the blocks has also been discussed. The design methodology is based on behavioral design and CMOS process.

• 전자공학회논문지B
• /
• 제33B권11호
• /
• pp.22-30
• /
• 1996

In this paper, the properties and the design procedures of the internal model control (IMC) structures are discussed and a new nonlinear IMC(NIMC) strategy is proposed. The IMC controllers are simply inverse controller in principle but the development of a NIMC poses difficulties due to the inherent complexity of nonlinear systems. Existing design mehtods are a few and not easy to implement. The proposed approach is using multiple linear models, linear IMC controllers, and swiching scheme instead of using nonlinear model/controller. The advantages of the new approach are that we can use linear IMC mehtod which are now well estabilished and need not global nonlinear models.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.588-594
• /
• 1998

Reliable three-dimensional models of woven fabric composites had scarcely been proposed for their geometric complexity. Simplified models, mostly one- or two-dimensional, currently used are not considered effective enough because of their oversimplifications. In this paper, the equivalent thermal conductivities and elasticity properties of woven fabric composites are computed using homogenization technique. The computational results show that the strength and thermal conductivity linearly increase with fiber volume fraction and that the variations of undulation of fibers has little effect on equivalent material properties. Homogenization technique is proved useful in the study of woven fabric composites and may find a lot more applications in the area.

• 한국소음진동공학회논문집
• /
• 제22권4호
• /
• pp.393-400
• /
• 2012

This paper deals with a development of 2-DOF flutter experiment equipment which represents a 2-DOF typical section model. For a conventional 2-DOF flutter experiment equipment, it is hard to observe flutter boundary clearly due to the complexity of the experiment equipment. To refine our flutter experiment equipment system, a compliant mechanism based torsional spring is used. Well-designed extruded aluminum pipe works as a torsional spring. SolidWorks and ANSYS are used for modeling, analysis and design of the torsional spring. With this designed torsional spring, the 2-DOF flutter experiment equipment is developed and wind tunnel tests are performed. Clear flutter boundary which is estimated by classical flutter analysis is observed in the experiments.

• 경영과학
• /
• 제28권2호
• /
• pp.53-62
• /
• 2011

The objective of this paper is to propose a Binary Particle Swarm Optimization(BPSO) for design of reporting cell management system. The assignment of cells to reporting or non-reporting cells is an NP-complete problem having an exponential complexity in the Reporting Cell Location Management(RCLM) system. The number of reporting cells and which cell must be reporting cell should be determined to balance the registration(location update) and search(paging) operations to minimize the cost of RCLM system. Experimental results demonstrate that BPSO is an effective and competitive approach in fairly satisfactory results with respect to solution quality and execution time for the optimal design of location management system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1410-1413
• /
• 2004

Finite element method is very effective method to simulate the forming processes with good prediction of the deformation behaviour. For the finite element modeling of sheet mental forming the accurate tool model is required. Due to the geometrical complexity of real-size part stamping tools it is hard to make FE model for real-size auto-body stamping parts. In this paper, it was focussed on the drawability factors on auto-body panel stamping by AUTOFORM with using tool planning alloy to reduce law price as well as high precision from Design Optimization of die. According to this study, the results of simulation will give engineers good information to access the Design Optimization of die.

• 정보학연구
• /
• 제6권3호
• /
• pp.35-44
• /
• 2003

본 연구는 1MHz 대에서 인간의 생체 신호 측정용 인터페이스에 필수적으로 사용되는 10차 이하의 생체 신호용 능동필터를 설계하기 위한 컴퓨터 알고리즘을 구현하였다. 시간이 많이 걸리고 복잡한 계산을 요하는 수동적 설계의 단점을 개선함으로써 의학분야의 응용성을 제시하고 있다.

• 대한산업공학회지
• /
• 제23권3호
• /
• pp.559-580
• /
• 1997

It is essential to construct on efficient material flow system for the successful introduction of automated manufacturing systems. Automated Guided Vehicle System(AGVS) ploys a significant role more and more in modern manufacturing environments, because of the flexibility and the precision they offer. However, as the size and the complexity of systems increase, the problems of dispatching, routing and scheduling of AGVs became complicated due to their independent and asynchronous demands. In this paper, we review relevant papers, and provide a new and more efficient method for partitioning the AGV system by introducing the concept of Central Path. This method named Central Path design has advantages, since each partitioned workstation group is served by one AGV and the material handling between groups is performed by special AGV that is used for the Central Path. Therefore the congestion problems never occur. Furthermore Central Path Design has a high flexibility for alteration and extension of system. Finally, we demonstrate its efficiency using simulation.

• 소음진동
• /
• 제1권1호
• /
• pp.29-38
• /
• 1991

The performance of silencer system is controlled by the geometrical parameters such as the relative location of inlet and outlet ports, size of main chamber, and cross sectional geometry of inlet-outlet ports and main chamber of silencer. In addition to these parameters, the presence of mean flow and temperature gradient along the silencer also affects the acoustic characteristics of silencer system. Due to the complexity of silencer, it is not straight forward to design the appropriate silencer system. In this paper, a design methodology based on an oustic analysis of silencer system is proposed ; low frequency and high frequency tuning method.