• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.100-105
• /
• 2016

The use of 3D scanners has increased gradually according to increasing 3D printer applications. The precision inspection of car parts or electronic components is an important issue not only in the field of mass production, but also in small-scale production. Recently, 3D scanner equipment efficiency and recognition technology has been improved continuously. On the other hand, the spraying time to prepare 3D scanning is time-consuming and has environmental problems. Therefore, an automatic spray system has been in demand by the manufacturing industry. Automatic spray equipment was newly developed for the preparation of a 3D scanner. In this research, the automatic spray system guarantees uniform spray operation. To determine the optimal spray parameters, various spraying methods, solutions and conditions were tested and compared with the experiments. The preparation time for 3D scanning was reduced to 1/10 compared to the manual spraying time, and indicates the optimal spraying conditions through a comparison of various spray coating conditions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.3
• /
• pp.88-98
• /
• 2011

Masonry structure is a style of building which has been widely applied as residential facilities of low and middle stories, commercial and public facilities etc. But it is possible to destroy by loss of adhesive strength or sliding when lateral forces, such as earthquake, occurs. This study proposes a seismic retrofit method for masonry structure and its seismic performance is demonstrated by shaking table test. Two specimens per each shaking direction were made, having out-of-plane(weak axis) and in-plane(strong axis) direction. External load of 1 ton was also applied for each specimen during the test, to model the behavior of reinforced masonry wall. As a result of shaking table tests, it is shown that the specimen applying the proposed seismic retrofit method showed acceptable behaviors in both of Korea building design criteria(0.14g) and USA seismic criteria suggested by IBC(0.4g). However, it was observed that stiffness of the specimen toward out-of-plane was rapidly decreasing when seismic excitations over 0.14g were loaded. In comparison of relative displacements, maximum relative displacement of specimens which were accelerated toward out-of-plane with 0.4g at once was 29~31% of maximum relative displacement when specimens were gradually accelerated from 0.08g to 0.4g, while the maximum relative displacement of specimens accelerated toward in-plane has similar value in both cases. Therefore, it is concluded that the wall accelerated toward out-of-plane is more affected by hair crack or possible fatigues caused by seismic excitation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2014

Recently, natural aggregate was adequate to supply the demand due to increase of building construction. National pollution induced by construction waste caused by the reconstruction and redevelopment was cited as the major social issues in Korea. Therefore, government are required by law to use the recycled aggregate. In order to consider safety, KS F 2573 recommend that recycled aggregate with below design strength 27MPa and replacement ratio of 30%. This study on flexural behaviors of reinforced concrete beam was conducted and the specimens employed in test were planed with high strength concrete (40, 50 and 60MPa) and recycled aggregate replacement ratio (0, 30, 50, 100%). Although the flexural strength of reinforced concrete beam has trendy to decrease with increase of replacement ratio, it is meet to KCI 2007. The comparison results show that reinforced concrete beam using recycled aggregate can apply as flexural member in building construction.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.6
• /
• pp.145-152
• /
• 2013

As a typical construction material, concrete has been used in building all kinds of structures since the late $19^{th}$ century. Although it was recognized to secure durability as long as the regulations on design and construction have been reasonably complied, the trends of life-shortening and deterioration have frequently occurred due to all kinds of the external effects that have been experienced during the procedures of using the structures. To make matters even worse, deterioration of the concrete structures according to deterioration can not be controlled any more. Finally, the reality is that repair and maintenance are necessary in the maintenance aspect of the concrete structure. In this study, CRM(Chemical Resistance of Laminating Reinforcement Method), which had been developed to reinforce the surface of concrete and specially improve chemical resistance performance, has been applied to enhance the existing repairing and maintenance method. Therefore, the result has been drawn with comparison and analysis of the specimens applied with the general repairing and maintenance method and CRM through a variety of durability test in this study. With the result of the test, durability of the specimen applied with CRM has been more improved than the existing repairing and maintenance method, which is judged as because of the laminating effect due to reinforcement of epoxy impregnated of alkali-resistance fiber and double layered fiber reinforced seat.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.167-175
• /
• 2018

This research deals, The characteristics of mechanics and behavior of the tube structural systems, It has been investigated and considered conventional theory and case models, It has shown the suitability, The best location, And optimal shape of the unit module system, Considered variables materials of stiffness increase and decrease in hybrid tube structural systems this study carried out adapting analysis of statistical concepts. In a concrete way, This study exams the effect of reducing horizontal displacement and the shear lag phenomenon, Also, The purpose of this study is to utilize the basic data on the design and study of future high-rise hybrid structural system using this research. As a result, The framed- tube structural system does not effectively cope with horizontal behavior of high-rise buildings, The results of using varying material tested resistance factors and lateral loads in hybrid tube structural system, When each material is compared Bracing material is identified as a key factor in lateral behavior. In a ratio of material quantity framed-tube structural system, The level of sensitivity affecting the horizontal displacement is greater then the beam's column, In case of braced tube structural system, Braced appeared to be most sensitive in comparison of material quantity ratio in columns and beams.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.3
• /
• pp.167-173
• /
• 2014

In this work, based on the blade element-momentum theory (BEMT), we proposed the geometry of a lab-scale horizontal axis tidal turbine with a diameter of 80cm, which can demonstrate the maximum power coefficient, and investigated the effect of blade pitch angle increase on the power coefficient. For validation of the computed power coefficients by the BEMT, we also computed the power coefficient using the computational fluid dynamics (CFD) for each case. For the CFD, 15 times of the turbine radius was used for the length and diameter of the computational domain, and the open boundary condition was prescribed at the boundary of the computational domain. The maximum power coefficients of the turbine acquired by the BEMT and CFD were about 48%, showing a good agreement. Both of the power coefficients computed by the BEMT and CFD tended to decrease when the blade pitch angle increases. The two power coefficients for a given tip-speed ratio were in good agreement. Through the present study, we have confirmed that we can trust the proposed geometry and the computed power coefficients based on the BEMT.

• Science of Emotion and Sensibility
• /
• v.8 no.3
• /
• pp.241-251
• /
• 2005

With its history of two thousand years of studying the human mind, Confucianism may be applied to contemporary emotional science for its unique perspectives and methodologies in understanding the origin of the human mind. By examining the Confucian understanding of human mind according to general Confucian ideas as well as the scholar, LEE Whang's, an idea similar to contemporary 'emotion' in Confucianism was discovered. Importance of the sentiment was not in the resulting goodness originating from one's fundamental nature, but rather its goodness was only achieved when human nature manifested itself without any distortion. This good emotion, namely 'sensibility', presents the essential difference Confucian understanding bears in comparison to the contemporary concept. And the system for grasping the human mind was considered to be the viewpoint of examining the contents and subject of function than a formal system of functioning human mind. It assumes the stance of looking into thehuman mind from the general and synthetic view of contemporary cognitive, emotional, biological and philosophical perspectives. Overall, the researchconcludes that there existed a long history of high-level research into the human mind in Confucianism that may satisfactorily provide partial reference and understanding as well as consequent perspectives and knowledge for discovering the common denominator with the emotional science.

• Science of Emotion and Sensibility
• /
• v.12 no.1
• /
• pp.55-64
• /
• 2009

Previous research has mainly investigated the characteristics of expertise by using typical and routine tasks. This research to overcome these limitations included non-routine task situations and observed expert and novice pilots' situation awareness (SA) performance in routine and non-routine situations. Additionally, whether the ability to aware or perceive the environmental information in limited time varies with the level of expertise was tested. To this end, $2^*2^*2$ mixed factorial design was employed, including expertise (novice/expert) as a between-subjects variable and normality of fight situation (routine/non-routine) and stimulus display time (long/short) as within-subjects variables. As results, there was no performance difference in routine situations between experts and novices, while experts significantly outperformed novices in non-routine situations. When the display time became shorter, overall SA accuracy was decreased for both experts and novices, whereas experts' performance remained significantly higher than novices in short and long conditions. When we examined the interaction between the normality of fight situation and stimulus display time, there was no difference between experts and novices in routine situations for both short and long conditions. In non-routine situations, however, experts' SA accuracy was significantly higher than novices both in short and long conditions. Overall, non-routineness of flight situation does not have any impact on SA performance of experts, while it has a critical impact on SA performance of novices.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.2
• /
• pp.177-182
• /
• 2004

This experiment was conducted to compare the agronomic characteristics and productivity inintroduced vetch cultivar at the experimental field of Grassland and Forage Crops Division, National Livestock Research Institute from 1999 to 2000. The experiment was arranged in a randomized block design with three replications. The vetch cultivar used in this study were 8 cultivar(Haymaker plus, Common, Capello, Namoi, Victa, Aneto, Popany, Korean milk vetch). Namoi, Victa and Aneto cultivar were died during winter. The cultivar having the fastest flowering date was Korean milk vetch while the flowering date of Common was the latest as 22th May. The average dry matter(DM) content was 14.7% and crude protein(CP) content was 20.9%. Common showed the highest CP content by 23.1% and Korean milk vetch showed the lowest content by 18.0%. Average acid detergent fiber(ADF) and neutral detergent fiber(NDF) content were 33.5 and 42.5% respectively. All cultivar showed the first grade of RFV(relative feed value). The productivity of vetch cultivar were severely different according to the winter hardness. Common showed the highest DM yield by 8,664kg/ha, but the DM yield of Capello and Popany were low by 3,004 and 2,114kg/ha, respectively. The yield of CP and TDN(total digestible nutrient) also was high at Common. The results of this experiments indicated that the productivity of vetch cultivar was effected greatly depending on winter hardness, therefore it was thought winter hardness is the main factor for introducing vetch cultivar.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.41-49
• /
• 2014

In this study, experimental research was carried out to evaluate the structural performance of the reinforced concrete beam using hybrid retrofitting with two materials (groove and embedding FRP rod, CFRP sheet) in existing reinforced concrete buildings. Seven reinforced concrete beams, retrofitted groove and embedding FRP rod (NER series) and groove and embedding FRP rod with CFRP sheet (NERL series), and standard specimen (NBS) were constructed and tested under monotonic loading. Design parameters of test specimens are the amount of groove and embedding FRP rod and lapping CFRP sheet. Test results showed that the maximum load carrying capacity of specimens with groove and embedding FRP rod and groove and embedding FRP rod with CFRP sheet (NERL series) were increased the by 12~46% and 22~77% respectively in comparison with the standard specimen NBS. Test specimens NER series were failed with the adhesion slip and concrete cover separation. And test specimens NERL series were failed with the adhesion slip due to the confining effect of lapping CFRP sheet.