• 조명전기설비학회논문지
• /
• 제12권1호
• /
• pp.85-92
• /
• 1998

본 논문에서는 페트리 네트로 記述된 제어 사양을 접속 행렬로 해석한 후, 그 결과를 근거로 병렬 시퀸스의 수행이 가능한 순차 시스템 제어기(Sequential System Controller)를 설계하였다. 순차 시스템 제어기는 입력 처리부, 그리고 점화 처리부와 토큰 제어기로 구성된 페트리 네트 제어기로 구성된다. 입력 처리부에서는 입력 신호를 선택하여 점화 처리부로 전달하며, 점화 처리부는 토큰 운전기의 토큰 상태에 따라서 입력된 신호의 점화 여부를 판단하게 된다. 제안된 제어기는 제어 사양의 변경시 접속 행렬을 저장한 롬의 내용 변경만으로 제어기의 변경이 가능하고, 페트리 네트 제어기의 모듈화가 가능하여 기능의 확장이 용이하므로 자동창고 시스템, 반송 시스템, 및 승강기 시스템과 같은 순차 시스템 제어기의 개발 및 실현을 용이하게 할 수 있다.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.594-602
• /
• 1990

본 연구에서는 동력전달용 인벌류우트 원통치차(스퍼어 및 헬리컬 기어)의 강 도 및 각종 영향인자를 충분히 고려하면서 크기를 최소로 하는 치차장치의 설계법을 개발하고, 이 설계법을 기본으로 하여 퍼스널 컴퓨터 상에서 누구나 손쉽게 설계에 이 용할 수 있는 설계 시스템을 개발하여 그 평가를 수행한다.

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3949-3956
• /
• 2022

Kori Unit 1 is planning a system decontamination project to reduce radiation exposure of decommissioning workers, prevent the spread of contamination and down-grade the level of classification of radioactive waste. The system decontamination range for Kori Unit 1 will be the entire primary system, including RCS, CVCS and RHRS. Some system design modifications are required for the system decontamination operation. In this paper, major system design modifications were evaluated based on the conditions that system restoration is needed after completion of system decontamination. The major system design modifications are CIDF connection location to system, system decontamination operating pressure control, RCP seal water injection and formation of letdown flow. It was evaluated that there was no negative effect on the system due to the system design modifications. However, as the RCP seal water is injected into the system in the oxidation process, the concentration of the oxidizing agent is diluted. Therefore, the oxidizing agent injection and system decontamination operation procedures should be developed to address the dilution effect of the oxidizing agent. The system design modifications dealt in this paper will be finally confirmed through on-site investigation in the future, and if necessary, the system design modifications will be re-evaluated.

• East Asian mathematical journal
• /
• 제40권2호
• /
• pp.209-229
• /
• 2024

In this study, we design a teaching unit that constructs Pascal graphs and extended Pascal triangles to explore number patterns inherent in them. This teaching unit is designed to consider the diachronic process of teaching-learning by combining Dörfler's theoretical generalization model with Wittmann's design science ideas, which are applied to the didactical practice of mathematization. In the teaching unit, considering the teaching-learning level of prospective teachers who studied discrete mathematics, we generalize the well-known Pascal triangle and its number patterns to extended Pascal triangles which have directed graphs(called Pascal graphs) as geometric models. In this process, the use of symbols and the introduction of variables are exhibited as important means of generalization. It provides practical experiences of mathematization to prospective teachers by going through various steps of the generalization process targeting symbols. This study reflects Wittmann's intention in that well-understood mathematics and the context of the first type of empirical research as structure-genetic didactical analysis are considered in the design of the learning environment.

• 한국실내디자인학회논문집
• /
• 제40호
• /
• pp.109-116
• /
• 2003

The space planning and interior layout of recovery unit should be determined carefully for patient's nursing and observation which is considered to prevent infection and to cope quickly with emergency situation after surgical operation. Recently, the recovery unit in medical facilities is planned and managed without consideration of operating system, sanitary facilities and prior condition of space. Therefore, there is required to the logical criterion of architectural planning for patient's recovery unit which is concerned about opinion of medical team, anesthetist, sanitarian, architect and patient as a user. As the result, this study would apply to design guideline for the architectural planning of patient's recovery unit.

• 전자공학회논문지C
• /
• 제34C권11호
• /
• pp.20-28
• /
• 1997

In this paper, quantization and inverse quantizatio unit, a sa component of MPEG-2 moving picture compression system, ar edesigned. In the processing of quantization, this design adopted newly designed arithmetic units in which quantization matrices and scale code was expressed with SD(signed-digit) code. In the arithmetic unit of inverse quantization, quantization scale code, which has 5-bits length, is splited into two pieces; 2-bits for control code, 3-bits for quantization data, and the method to devise quantization step size is proposed. The design was coded with VHDL and synthesis results in that it consumed about 6,110 gates, and operating speed is 52MHz.

• 대한전자공학회논문지TE
• /
• 제39권2호
• /
• pp.1-5
• /
• 2002

부동소수점 시스템은 IEEE754 표준을 따른다. 부동소수점 방식의 가산기를 2의 보수를 사용하지 않고 1의 보수를 사용함으로서 간단히 나타낼 수 있다. 즉 이 시스템은 단지 반전을 함으로서 간단하고 빠른 연산을 수행할 수 있도록 하였다. 새롭게 설계된 가산기의 연산속도 향상을 위해 53bit의 캐리 선택 가산기를 사용하였다. 본 논문에서는 연산속도 향상을 위한 고성능의 효율적인 마이크로프로세서 시스템을 위한 부동소수점 가산 장치를 설계하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.247-248
• /
• 2023

The unit curtain wall is an exterior finish currently used on the exterior walls of high-rise buildings. Although the structural impact is not significant due to the non-strength wall, in the case of the unit curtain wall to which the factory manufacturing method is applied, deformation of the profile may occur according to its own weight. Therefore, in this study, stability is evaluated through design standard calculation applied when finishing the outer wall according to the design shape of the unit curtain wall profile.

• 전기의세계
• /
• 제29권7호
• /
• pp.460-470
• /
• 1980

The design of a control unit for a playback-type industrial robot is studied. Implemented for the cylindrical-coordinate type industrial robot with 5 degrees of freedom, the control unit constructed for the study consists of (i) z-80 .mu.p-based .mu.-computer control system (ii) Teach-Box for work command, and (iii) various softwares for generating signals for servo driving unit and operating the robot as playback-type. Softwares are developed by using high level Basic Language and low level z-80 Assembly Language for ease of programming and speed of program execution. To show the effectiveness, and example is included.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.585-588
• /
• 2004

This paper describes design and verification of the motion estimation and compensation unit using full search algorithm. Video processor is the key device of video communication systems. Motion estimation is the key module of video processor. The technologies of motion estimation and compensation unit are the core technologies for wireless video telecommunications system, portable multimedia systems. In this design, Verilog simulator and logic synthesis tools are used for hardware design and verification. In this paper, motion estimation and compensation unit are designed using FPGA, coded in Verilog HDL, and simulated and verified using Xilinx FPGA.