• Journal of The Korean Association For Science Education
• /
• v.37 no.1
• /
• pp.87-101
• /
• 2017

The analysis was carried out with meta-analysis on master's and doctoral dissertations, and academic journals that analyzed the effects of STEAM education between 2012 and 2015. From the total number of 75 dissertations and articles analyzed, 183 different effect sizes were calculated. The analysis was done to find out the kinds of differences that would be created according to the effect size of creativity, problem-solving ability, and researcher, target area, student division research design type, and level of schools. The total effect size of creativity scored 0.776, and demonstrated satisfaction in symmetry of funnel plot, with no publication biases. The fail-safe N scored 780, and since the number is smaller than 8,945, the results of this research has credibility. Furthermore, problem-solving ability shows intermediate level of effect size with a score of 0.584. It also showed satisfaction in symmetry with funnel plot, with no publication bias. With the different research methods of the sub-factors of creativity, fluency scored the highest with 0.929, flexibility with 0.881, originality with 0.838, sophistication with 0.653, abstractness with title 0.705, and resistance to termination, 0.527. This study finds its significance in the demonstration of average effect size of STEAM education through meta-analysis. According to research results, the effects of inclusive education could be determined, yet the specific effect cause or learning principles were difficult to find. It was found that the effects of STEAM education do not rise or fall depending on school age, and demonstrated differences in creativity according to the research methods or the researchers.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.23-32
• /
• 2008

Anatomical and physical characteristics of seven cultivars of chestnut wood (Castanea crenata Sieb. et Zucc.), Tanzawa, Ibuki, Mansung, Arima, Ginyose, Tsukuba, and Riheiguri, were investigated to obtain some valuable information for their possibilities to be used for high quality furnitures and woodcrafts. Solitary pore and figured-porous or ring-porous wood types were observed in wide growth rings, and ring-porous in narrow growth rings. Procumbent type was prevalent in ray cells although upright and square types were scarcely existed. Uniseriate, biseriate, and multiseriate rays were observed in tangential section. Uniseriate ray was abundant near the pith, and biseriate and multiseriate rays were frequently existed near the bark. The occurrence rate of biseriate and multiseriate rays was significantly high in Tanzawa, Ibuki, Mansung and Tsukuba, but was somewhat low in Arima, Ginyose and Riheiguri. The inner region showed larger vessel diameter, more vessel number, fewer ray number and higher ray height than the outer region. Growth-ring width in inner region was larger than that in outer region. Growth-rings in inner region of Mansung and Arima were wide while that of Ibuki was narrow. Outer region in all cultivars showed higher latewood percentage than inner region. Especially, Mansung and Tsukuba showed significantly high latewood percentage in their outer region. Green moisture content and density of heartwood were higher than those of sapwood. Tsukuba and Riheiguri had higher green moisture content, and Ibuki and Riheiguri had higher green density than the other chestnut cultivars.

• Journal of Korean Academy of Nursing
• /
• v.21 no.2
• /
• pp.129-149
• /
• 1991

Circadian rhythm is entrained in the 24-hour time interval by periodic factors in the environment, known as zeitgeber. But most rotating work schedules are outside the range of the entrainment of the pacemaker timing the human circadian sleep - wake cycle. It has been postulated that physiological and emotional disturbances occur in most human functions when the circadian rhythm is disturbed. So application of circadian principles to the design of shift schedules can aid in maintaining the temporal integrity of the circadian system and thereby minimize for the shift worker any detrimental consequences of circadian disruption. This study was a quasi-experimental study to test the effect of shift intervals for the clinical nurse on the circadian rhythm. Twenty nurses newly employed in general units of two hospitals were selected as an experimental group and twelve college nursing students as a control group. Both groups were selected according to an established criteria using a purposive sampling technique. Ten subjects were assigned to a weekly shift group and another ten to a biweekly shift group engaged in a semi -continuous shift schedule(sunday off) with a backward direction, that is, morning -evening - night shift. The control group worked a morning shift for 42 days. Oral temperature rhythm, waking tim, sleep - wake cycle, fatigue, and mental performance were measured during the experimental period. The data collection period was from April 30, 1990 to June 10, 1990. MANOVA, paired t-test, ANOVA, and Student Newman Keuls method were used for statistical analysis. The results are summarized as follows. 1. Phase delay in the acrophase of temperature rhythm was shown according to the backward rotating shift. A complete adaptation to work on the night shift was achieved between the sixth and ninth day of the night shift. 2. There was no difference in either waking time or sleep- wake cycle according to the duration of the working day for every shift group. Significant difference was found in the waking time and the sleep -wake cycle for subjects on the morning, evening, and night shift in both of the shift groups(weekly shift group : λ＝0.121, p＜0.01, λ＝0.112, p＜0.01, biweekly shift group : λ＝0.116, p＜0.01, λ＝0.084, p＜0.01). 3. There was no difference in fatigue between the first working day and the last working day for the control group and for the biweekly shift group. In the weekly shift group, physical fatigue was significantly different for the first day and the sixth day of the night shift(t＝-2.28, p＜0.05). Physical fatigue and total fatigue on the first day of the night shift showed a significant difference among the control group, the weekly shift group, and the biweekly shift group(F＝5.79, p＜0.01, F＝4.56, p＜0.05). There was a significant difference between the shift groups and the control group(p＜0.05), Physical fatigue, neurosensory fatigue and total fatigue on the last day of the night shift showed a significant difference among the control group, the weekly shift group, and the biweekly shift group(F＝12.65, p＜0.01, F＝7.77, p＜0.01, F＝9.68, p＜0.01). There was a significant difference between the shift groups and the control group(p＜0.05). 4. No difference in mental performance was seen between the first day and the last day of work in each case. An arithmatic test on the first day of the night shift revealed a significant difference among the control group, the weekly shift group, and the biweekly shift group(F＝3.79, p＜0.05). There was a significant difference between the shift groups and the control group(p＜0.05) . The digital symbol substitution test and the arithmetic test on the last day of the night shift showed a significant difference among the control group, the weekly shift group, and the biweekly shift group(F＝3.68, p＜0.05, F＝5.55, p＜0.01), and both showed a significant difference between the shift groups and the control group(p＜0.05). Accordingly, this study showed that during night duty, the waking time, sleep- wake cycle, and fatigue increased and mental performance decreased compared with morning and evening duty. It was also found that the weekly shift group had a higher fatigue score on the sixth day of night duty as compared to the -first day, but the waking time, sleep- wake cycle, and mental performance revealed no difference for the duration of the night duty or between shift groups, and complete adaptation of temperature rhythm was achieved between the sixth and ninth day of night duty. It is possible to conclude from these results that for intermediate circadian type in a healthy young woman, a biweekly shift system is more compatible with the circadian timing system than weekly shift system.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.12
• /
• pp.1102-1139
• /
• 2002

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2000 and 2001 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD technologies were widely applied for developing facilities and their systems. (2) Most of papers related with heat transfer analysis and heat exchanger shows dealt with convection, evaporation, and channel flow for the design application of heat exchanger. The numerical heat transfer simulation studies have been peformed and reported to show heat transfer characteristics. Experimental as well as numerical studies on heat exchanger were reported, while not many papers are available for the system analysis including heat exchanger. (3) A review of the recent studies on heat pump system shows that performance analysis and control of heat pump have been peformed by various simulations and experiments. The research papers on multi-type heat pump system increased significantly. The studies on heat pipe have been examined experimently for change of working characteristics and strut lure. Research on the phase change has been carried out steadily and operation strategies of encapsulated ice storage tank are reported experimentally in several papers. (4) A review of recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. Evaporation and condensation heat transfer characteristics are investigated for tube shapes and new alternative refrigerants. Studies on components of refrigeration/air conditioning system are carried to examine efficiency for various compressors and performance of new expansion devices. In addition to thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out, however research works on two-phase flow seemed to be insufficient. (5) A review of the recent studies on absorption cooling system indicates that heat and mass transfer phenomena have been investigated to improve absorber performance. Various experimental data have been presented and several simulation models have been proposed. A review of the recent studies on duct and ventilation shows that ventilation indices have been proposed to quantify the ventilation performance in buildings and tunnels. Main efforts have been focused on the applications of ventilation effectiveness in practice, either numerically using computational fluid dynamics or experimentally using tracer gas techniques. (6) Based on a review of recent studies on indoor thermal environment and building service systems, research issues have mainly focused on many innovative ideas such as underfloor air-conditioning system, personal environmental modules, radiant floor cooling and etc. Also, the new approaches for minimizing energy consumption as well as improving indoor environmental conditions through predictive control of HVAC systems, various activities of building energy management and cost-benefit analysis for economic evaluation were highlighted.

• Journal of the Korea Concrete Institute
• /
• v.19 no.1
• /
• pp.121-130
• /
• 2007

To investigate the enhancement in strength and deformation capacities of concrete confined by FRP composites, tests under axial loads were carried out on three groups of thirty six short columns in circular section with diverse GFRP confining reinforcement. The major test variables considered include fiber content or orientation, wrap or tube type by varying the end loading condition, and continuous or discontinuous confinement depending on the presence of vortical spices between its two halves. The circumferential FRP strains at failure for different types of confinements were also investigated with emphasis. Various analytical models capable of predicting the ultimate strength and strain of the confined concrete were examined by comparing to observed results. Tests results showed that FRP wraps or tubes provide the substantial increase in strength and deformation, while partial wraps comprising the vertical discontinuities fail in an explosive manner with less increase in strength, particularly in deformation. A bilinear stress-strain response was observed throughout all tests with some variations of strain hardening. The failure hoop strains measured on the FRP surface were less than those obtained from the tensile coupons in all tests with a high degree of variation. In overall, existing predictive equations overestimated ultimate strengths and strains observed in present tests, with a much larger scatter related to the latter. For more accuracy, two simple design- oriented equations correlated with present tests are proposed. The strength equation was derived using the Mohr-Coulomb failure criterion, whereas the strain equation was based on entirely fitting of test data including the unconfined concrete strength as one of governing factors.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.28 no.4
• /
• pp.341-350
• /
• 2008

This trial was conducted to investigate effects of different feeding types of conventional or total mixed rations (TMR) provision on feed intake, nutrient digestibility, nitrogen retention and blood metabolite characteristics in different breeds of native and cross bred Korean black goats. Ten Korean native male goats and 10 Korean crossbred black male goats (Korean native $\times$ Australian feral crossbred, 50:50), average 18 kg of BW, were used in this trial, and each breed of Korean black goats was separated into conventional and TMR diets treatments in a randomized complete block design. Conventional diet was based on forages and commercial diet. All animals were housed in individual metabolism crates and were fed ad libitum. Water was available at all times. Experimental period totally lasted for 38 days, consisting of 14 days of adaptation, 10 days of preliminary period and 14 days of sample collection period. Daily dry matter intake was significantly (p<0.05) higher in TMR treatments of the crossbred goats. Within breeds, crossbred rather than native-bred consumed more highly, and within the feeding type, TMR diets were more fed in comparison with conventional diet. Average daily gain ranked the highest in crossbred : TMR, followed by crossbred: conventional diet, native-bred: TMR, and native-bred: conventional diet (p<0.05). Dry matter digestibility was significantly (p<0.05) higher for TMR than for conventional diets, and it was higher in crossbred than in native-bred Korea black goats. Nitrogen retention was highest in TMR treatments of crossbreed, whereas it was lowest in conventional diet of native breed (p<0.05). Plasma glucose and urea nitrogen concentrations were significantly (p<0.05) higher in crossbred than in native-bred Korean black goats. Overall, the results indicated that feeding total mixed ration to crossbred rather than native-bred Korean black goats had more favourable influences on their performances, intakes, digestibility, nitrogen retention and blood metabolite characteristics. In conclusion, it is conceived that the results may contribute to economical benefit to farms producing Korean black goats together with establishment of an efficient feeding management system.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.2
• /
• pp.136-142
• /
• 1985

For better grassland development in the forest, this field experiment was carried out to investigate the effect of thirteen different fertilizer levels of nitrogen(N), phosphorus ($P_2O_5$) and potassium ($K_2O$) on the botanical composition, growth and dry matter yield of grass-clover mixtures grown under trees with 40-50% of shading level. This experiment was arranged as a randomized block design with replications, and performed on the experimental field in the suburban forest of Suweon in 1984. The results obtained are summarized as follows: 1. Plant height and cover degree of grasses found to be high with 28 and 42kg N fertilizer per 10a, while those were the lowest with zero and N-zero fertilizer levels. The degree of bare land after the fourth cut was also high in the low N level. 2. A significant higher degree of leaf green and chlorophyll content of leaf blade was observed in the plot of 28 and 42 kg N per 10a when compared with low N fertilizer plot. However, leaf decay and plant type of grasses tended to be a little poor as the high N was applied. 3. the regrowth plant length and dry weight of grasses after the first cut increased significantly with 28 and 42 kg N fertilizer. However, those showed slightly increased regrowth in the plot of zero and N-zero fertilizer levels. 4. The dry matter yield of grasses was higher with 28 and 42 kg N than that of low N fertilizer level. Higher yields were obtained in the plot of standard ($N-P_2O_5-K_2O$=28-20-24 kg/10a), 50% increase of $N,P_2O_5K_2O$ and N-50% increase, although there were no significant differences among three fertilizer levels. 5. Growth, botanical composition, regrowth and yield of grasses grown under pine trees were significantly influenced by N fertilizer level, regardless of $P_2O_5\;and\;K_2O$. The fertilizer level of $N-P_2O_5-K_2O$ was 28-20-24 kg per 10a for more forage production in the forest. Considering economic yield in this study, however, the optimum fertilizer level of N, $P_2O_5\;and\;K_2O$ was suppose to be 21-28, 10-15, and 12-18kg per 10a, respectively.

• Korean Journal of Poultry Science
• /
• v.15 no.3
• /
• pp.229-246
• /
• 1988

These studies were conducted to investigate the effects of dietary protein and metabolizable energy(ME) levels on layer performance during summer period. Total 480 ISA Brown egg-type layers ageing 49 weeks housed 2 birds per cage with 4 replictes of 20 birds were employed in this study. Mean environmental temperature over experimental period ranged from 22.3$^{\circ}$to 29.5$^{\circ}C$. The treatments consisted of dietary ME levels of 2500, 2700, 2900kcal/kg of diet containing 15% and 17% protein, respectively, to provide $3{\times}2$factorial design. As metabolizable energy level increased form 2500 to 2900 kcal/kg of diet, daily feed and protein intake, egg production. egg weight, egg mass decreased, but the reverse was true for the daily energy intake, energy requirement and feed costs per kg egg. Feed conversion(kg feed/kg egg) and viability were not affected by the dietary energy levels. However, there were no significant difference in egg production, protein requirement per kg egg, and egg weight between those hens fed 2500 kcal ME/kg diets and those fed 2700 kcal ME/kg diets, and no difference was found in egg weight between those fed 2700 kcal ME/kg and those fed 2900 kcal ME/kg, either. In addition, no specific trend was observed in protein requirement per egg by the different level of metabolizable energy in diets. On the other hand, as dietary protein level increased from 15 to 17%, daily protein in-take, egg production, egg weight, egg mass, and protein requirement and feed costs per kg egg increased, but feed and energy requirement per kg egg decreased, and no significant difference in the daily feed and energy intake and viability were observed among dietary protein levels. It was concluded that metabolizable energy level of 2500 kcal/kg of diet and 17% dietary protein level were considered to be adequate to support the optimum productivity of layers during summer period.

• 대한공업교육학회지
• /
• v.34 no.2
• /
• pp.128-160
• /
• 2009

Narratively I have described interactions between two teachers performing an introduction to the engineering class with various situations such as place, teacher, student and subject. I have specifically illuminated a three-dimensional narrative inquiry space embracing the culture of the university, the college of engineering and the ABEEK(Accreditation Board of Engineering Education of Korea)program. The result of the study is as follows: First, in order to stimulate the students' motivation, the teachers have to make not only their class PowerPoint slides match the size of the classroom, but the content of the slides must be condensed with core concepts. They also should utilized some video clips to empower students' interest in the subject within their classrooms. Second, the teachers should do various class activities in the classroom. Instead of spending most of the class time with his/her explanation, it would be advantageous for the teachers to allow the students to perform a task in class. Third, the teachers should ask their students about assignments which are helping students' understanding of the subject and planning of their future. Lastly, the teachers need to design the mid-term and the final tests inducing the students' motivation. Those tests also must test students' creativity and insight of the subject. Thus, the test should consist of an interpretive exercise and an essay type of item thus reducing the multiple choice types of items. There are several limitations to the study. First it is difficult to generalize what we found here because it is a case study. Second, we could not study in depth the effect of the interaction between the two teachers who were performing the introduction to the engineering course during the academic semester. Third, this study just probed into the difficulties of teaching the course. Hence, we have to understand more by focusing on each issue such as adapting to a new learning environment as a student from abroad, a practical experience boosting the students' interest in the introduction to the engineering course, also a practical experience on process based learning-versus result based learning, and an effective management of the student team presentation etc.

• Journal of Intelligence and Information Systems
• /
• v.20 no.4
• /
• pp.1-23
• /
• 2014

Market forecasting aims to estimate the sales volume of a product or service that is sold to consumers for a specific selling period. From the perspective of the enterprise, accurate market forecasting assists in determining the timing of new product introduction, product design, and establishing production plans and marketing strategies that enable a more efficient decision-making process. Moreover, accurate market forecasting enables governments to efficiently establish a national budget organization. This study aims to generate a market growth curve for ICT (information and communication technology) goods using past time series data; categorize products showing similar growth patterns; understand markets in the industry; and forecast the future outlook of such products. This study suggests the useful and meaningful process (or methodology) to identify the market growth pattern with quantitative growth model and data mining algorithm. The study employs the following methodology. At the first stage, past time series data are collected based on the target products or services of categorized industry. The data, such as the volume of sales and domestic consumption for a specific product or service, are collected from the relevant government ministry, the National Statistical Office, and other relevant government organizations. For collected data that may not be analyzed due to the lack of past data and the alteration of code names, data pre-processing work should be performed. At the second stage of this process, an optimal model for market forecasting should be selected. This model can be varied on the basis of the characteristics of each categorized industry. As this study is focused on the ICT industry, which has more frequent new technology appearances resulting in changes of the market structure, Logistic model, Gompertz model, and Bass model are selected. A hybrid model that combines different models can also be considered. The hybrid model considered for use in this study analyzes the size of the market potential through the Logistic and Gompertz models, and then the figures are used for the Bass model. The third stage of this process is to evaluate which model most accurately explains the data. In order to do this, the parameter should be estimated on the basis of the collected past time series data to generate the models' predictive value and calculate the root-mean squared error (RMSE). The model that shows the lowest average RMSE value for every product type is considered as the best model. At the fourth stage of this process, based on the estimated parameter value generated by the best model, a market growth pattern map is constructed with self-organizing map algorithm. A self-organizing map is learning with market pattern parameters for all products or services as input data, and the products or services are organized into an $N{\times}N$ map. The number of clusters increase from 2 to M, depending on the characteristics of the nodes on the map. The clusters are divided into zones, and the clusters with the ability to provide the most meaningful explanation are selected. Based on the final selection of clusters, the boundaries between the nodes are selected and, ultimately, the market growth pattern map is completed. The last step is to determine the final characteristics of the clusters as well as the market growth curve. The average of the market growth pattern parameters in the clusters is taken to be a representative figure. Using this figure, a growth curve is drawn for each cluster, and their characteristics are analyzed. Also, taking into consideration the product types in each cluster, their characteristics can be qualitatively generated. We expect that the process and system that this paper suggests can be used as a tool for forecasting demand in the ICT and other industries.