• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.48-49
• /
• 2020

Recently the diversification of construction market and the continuous reduction of construction amount are raising the need of alternative delivery method in the construction industry. The foreign advanced companies actively adopted the CM at Risk delivery method where they perform the service of agent CM in the design phase, and agree GMP(Guaranteed Maximum Price) with the client at the time of 50~80% completion of design. Even in Korea they began to apply that method to pilot projects. In CM at Risk, through the early participation of builder, the level of design completion can be improved and the change order and construction period delay can be minimized. On the other hand, GMP is usually calculated when the design is about 80% complete, so there is uncertainty in the construction cost. Therefore, in this research, the increased amounts of construction cost are analyzed in a number of public construction projects, and GMP calculation process is proposed using the analysis results and CBR(Case-Based Reasoning) technique to reduce the construction cost increase in the construction phase.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1131-1137
• /
• 2004

With the recent continuous expansion of subways, newly created subways tend to have lower locations and wider sections. Furthermore. since box structures and evacuating tunnels are classified into a category of mass-concrete. the thermal-stress, emitted from the inside. causes cracks to structures from the inception of constructing. In this paper, thermal-stress analysis and durability evaluation of box structure were carried out to investigate relationship between durability and parameter causing the heat of hydration. Through the examination, this paper tries to find out satisfactory solutions to regulated thermal crack and ensure the required duration period. The results of this paper showed that to control thermal crack and guarantee the required duration period it was more effective to use low-heat-portland cement and moderateheat-portland cement. As cement volume due to reduction of water-cement ratio increased, the possibility of thermal cracks occurrence increased but results of durability evaluation was different depending on evaluation method. The results showed that the appropriate water-cement ratio to control the heat of hydration and satisfy the required durability was $45\∼55\%$. And it was showed that during placement of concrete blocks ambient temperature affect the heat of hydration. thermal crack and long-term durability largely and when concrete was placed at low temperature to control thermal crack. it need to try to guarantee the required duration period. Henceforth, by studying not only internal and external conditions, such as the relative humidity and the unit weight. but also methods, to evaluate durability, in accordance with domestic situations, more reasonable design of durability should be achieved.

• 대한간호학회지
• /
• 제28권2호
• /
• pp.303-318
• /
• 1998

Cutaneous stimulation and distraction are independent nursing interventions used in various painful conditions, which is explained by gate control theory. This study was aimed at identifying the effect of cutaneous stimulation, distraction and combination of cutaneous stimulation and distraction on the reduction of intravenous injection pain levels of chemotherapy patients. Repeated measurement post test research design was used for one group. Fifty-three cancer patients who received intravenous chemotherapy regulary in outpatient injection rooms of D medical center and Y medical center in Taegu were studied from June 23, 1997 to July 12, 1997. First the intravenous injection pain level of the control period was measured. Second, the intravenous injection pain level of the experimental period using cutaneous stimulation was measured. Third, the intravenous injection pain level of the experimental period using distraction was messured. Fourth, the intravenous injection pain level of the experimental period using a combination of cutaneous stimulation and distraction was measured. The instruments used for this study were a visual analogue pain scale as subjective pain measurement and an objective pain behavior checklist. Analysis of data was done by use of repeated measure ANOVA, bonferni, t-test, and F-test. The results of this study were summerized as follows : 1) The first hypothesis that the subjective pain score of intraveneous injection pain in the experimental period with cutaneous stimulation will be lower than in the control period was rejected. 2) The second hypothesis that the objective pain behavior score of intravenous injection pain in the experimental period with cutaneous stimulation will be lower than in the control period was accepted(F=24.23, p=0.0001, Bornferni p<.05). 3) The third hypothesis that the subjective pain score of intraveneous injection pain in the experimental period with distraction will be lower than in the control period was rejected. 4) The fourth hypothesis that the objective pain score of intravenous injection pain in the experimental period with distraction will be lower than in the control period was accepted(F=24.23, p=0.0001, Bornferni p<.05). 5) The fifth hypothesis that the subjective pain score of intravenous injection pain in the experimental period with combination of cutaneous stimulation and distraction will be lower than in the control period was accepted(F=3.04, p=0.031, Bonferni p<.05). 6) The sixth hypothesis that the objective pain score of intravenous injection pain in the experimental period with combination of cutaneous stimulation and distraction will be lower than in the control period was accepted(F=24.23, p=0.0001, Bonferni p<.05).

• 대한조선학회논문집
• /
• 제53권6호
• /
• pp.503-513
• /
• 2016

In order to reduce the green-house gas exhaustion, International Maritime Organization (IMO) has been reinforcing carbon gas regulations. Due to the regulations, a lot of competitions for designing Eco ship in the shipbuilding industry are progressing now. It is faced with the necessity of reducing hull weight by combining automated systems for optimal compartment arrangement with hull structural design. Most researches on optimum structural design method have been consistently in progress and applied to minimize weight and cost of mid-ship section in preliminary ship design stage based on analytical structural analysis method on fixed compartment arrangement. In order to reduce design period and to improve international technical competitiveness by shortening the period of hull structural design and enhancing design accuracy, it has been felt necessity to combine optimized compartment arrangement with optimum design of ship structure based on the international regulations and rules. So in this study, the automated design algorithm for longitudinal members has been developed to combine automated algorithm of compartment arrangement with hull structural design system for oil tanker. The SeaTrust-Hullscan software developed by Korean Register is used to perform ship structural design for mother ship and selected design cases. The effect of weight reduction is verified with comparison of ship weight between mother ship and the cases suggested in this study.

• 전기전자학회논문지
• /
• 제14권1호
• /
• pp.8-16
• /
• 2010

본 논문에서는 CCD 이미지 처리를 위한 최대 15MS/s의 속도의 중저속 아날로그-프론트 엔드(analog-front end, AFE)에서 사용될 수 있는 연속근사 ADC(Successive Approximation ADC, SA-ADC)의 설계를 제안한다. 파이프라인 ADC와 달리 SA-ADC는 동작주파수의 변화에 따른 전력소모의 스케일링(scaling) 효과가 크므로 저속에서 중속에 이르는 넓은 범위의 가변 데이터 처리 속도의 응용에 매우 효과적이다. 제안하는 설계는 입력 신호의 샘플링 동작을 내부 DAC(sub-DAC)로부터 따로 분리한 후, 커패시터 커플링을 통해 차동 결합함으로써 신호경로에 이르는 부하를 크게 줄이는 "차동 커패시터 커플링 기법"의 도입, 연속근사의 기법적 측면에서 signed 구조를 활용하여 데이터 변환주기 이전에 홀드된 입력신호로부터 미리 MSB(sign bit)를 결정함으로써 1사이클의 변환주기를 절약하고 내부 DAC의 하드웨어를 1비트 줄이는 구조와 같은 특징을 갖고 있다. 본 설계는 3.3V $0.35{\mu}m$ CMOS 공정으로써 설계하고 Spectre 시뮬레이션을 이용하여 그 특성을 분석함으로써 CCD 아날로그 프론트-엔드에 적용될 수 있음을 입증하였다.

• 한국강구조학회 논문집
• /
• 제16권1호통권68호
• /
• pp.73-79
• /
• 2004

파랑에 의해 발생하는 해양구조물의 진동을 억제하기 위해 동조질량감쇠기(Tuned Mass Damper, TMD)를 적용하여 그 효과를 분석하였다. 해양구조물의 운동방정식에 포함된 파랑-구조물 상호작용에 의한 비선형성을 선형화한 경우의 오차와 TMD설계시 선형방정식을 사용한 경우 발생할 수 있는 현상을 분석하였다. TMD설치 전후의 제진효과 분석에서는 주기를 달리한 규칙파에 의한 성능과, 유의파가 서로다른 불규칙파에 의한 성능을 동시에 분석하였다. 규칙파에 의한 해석결과 입사파의 주기가 구조물의 첫 번째 고유주기와 근접한 경우 제진효과가 뛰어났으며 주기가 더 짧거나 더 긴 경우는 제진효과가 감소하였다. 불규칙파에 의한 해석결과는 유의파가 상대적으로 작아 구조물의 고유주기 성분이 많이 포함된 파랑에 대한 제진효과가 뛰어나고, 유의파가 커서 구조물의 고유주기 보다 큰 성분이 많이 포함된 파랑에서는 제진효과를 발견할 수 없었다. 따라서, 해양구조물에 TMD를 적용할 때는 파고가 작은 상시 내습 파랑에 대한 제진효과를 볼 수 있으며 이는 상시 진동제어를 통한 피로수명 확보에 큰 도움이 될 것으로 예상된다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.978-981
• /
• 2003

컴포넌트 기반의 시스템 개발은 개발기간 단축 및 운영 효율성과 유지보수의 향상에 있어 장점을 가지고 있다. 그러나 이러한 방법론으로 시스템을 개발할 때, 개발 방법론 전문가가 있어야 하고 산출물 또한 방대하여 중소규모의 시스템을 개발하기에는 어려운 점이 있다. 문제점을 해결하기 위하여 소프트웨어 시스템 공학적 접근을 통해 검토한 후 중소규모의 시스템 분석 및 설계에서 구현까지의 과정에 대한 방법론을 제안하였다. 제안한 방법론을 선박 설계공정관리 시스템의 설계과정까지 적용한 결과 개발과정의 경제성과 효율성 측면에서 효과가 있는 것으로 판단되었다.

• Agribusiness and Information Management
• /
• 제7권2호
• /
• pp.12-18
• /
• 2015

Since 2000s, proper utilization of IoT (Internet of Things) technology is a key factor for a firm to become more competitive, and this stream is not exceptional for the food and agriculture industry. Along with this stream, Korea government organization, for example MAFRA (Ministry of Agriculture, Food and Rural Affairs), elected to adopt IoT technology, such as USN and RFID technologies, in the food and agriculture industry. Based on the IoT technology, MAFARA launched six "IoT based farm" project in 2007. IoT based farm project includes IoT based greenhouse system project, and it shows drastic efficiency in terms of cost reduction. When it comes to the productivity, however, the effect of IoT based greenhouse system is still ambiguous. In this regard, this study conducted systems analysis and design for IoT based tomato greenhouse in order to help farmers' decision making related to the productivity by establishing standardized database structure and designing output form to analyze productivity indices. Proposed systems analysis and design can be utilized as a data analysis tools by farmers. Productivity data from the proposed systems is can be used by researchers to identify the relationship among environment, plant growth and productivity. Policy makers also can refer to the data and output forms to predict the quantity of fruit during certain period and to revise production guideline more precisely.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권8호
• /
• pp.3025-3047
• /
• 2021

This paper presents the latest Ethernet standardization of in-vehicle network and the future trends of automotive Ethernet technology. The proposed system provides design and optimization algorithms for automotive networking technology related to AVB (Audio Video Bridge) technology. We present a design of in-vehicle network system as well as the optimization of AVB for automotive. A proposal of Reduced Latency of Machine to Machine (RLMM) plays an outstanding role in reducing the latency among devices. RLMM's approach to real-world experimental cases indicates a reduction in latency of around 41.2%. The setup optimized for the automotive network environment is expected to significantly reduce the time in the development and design process. The results obtained in the study of image transmission latency are trustworthy because average values were collected over a long period of time. It is necessary to analyze a latency between multimedia devices within limited time which will be of considerable benefit to the industry. Furthermore, the proposed reliable camera and video streaming through optimized AVB device settings would provide a high level of support in the real-time comprehension and analysis of images with AI (Artificial Intelligence) algorithms in autonomous driving.

• 한국공간구조학회논문집
• /
• 제16권4호
• /
• pp.101-108
• /
• 2016

Lifting plan in the large spacial structure is an important factor influencing the efficiency and economy of the construction process. The purpose of this study was deriving the requirements for lifting techniques as the basic research in the double spoke wheel roof structure construction. In the lift up erection method, management plan of the interference error in the column and outer-ring was needed that occur during lifting roof structure. In the bent erection method, material usage reduction plan was required by the structural design of the temporary bent. In the hybrid erection method, lifting plan was needed that minimizes weather condition and crane usage. All lifting techniques were required Value Engineering model for reduction of cost and construction period.