• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.4 no.1
• /
• pp.54-62
• /
• 1990

This paper shows a reasonable design standard of Demand Factor and Diversity Factor for buildings, that was made by the systematic and statistical way considering actual conditions, such as investicated electric equipment capacity, electric power consumption, etc. The saving of electric equipment investment, the decrease of power loss, the improvement of facilities utilization and the decrease of electric power rates, can be contributed by the application of the design standard. The recommended design standard must be applied by the revision of current regulations and laws.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1303-1308
• /
• 2008

In this study, we researched how to estimate life-stress relationship and acceleration factor through performing accelerated life test and analyzing it. The purpose of this study is to predict life of pneumatic cylinder within short time which is widely used in automation manufacturing line. In design of accelerated life test, we selected operating pressure and load that have the most influence on main failure mode of pneumatic cylinder as accelerated factor. We used two-way factorial design for arranging of test condition to accelerated factor and accelerated level.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.2
• /
• pp.140-146
• /
• 2009

Since the computer technology has been drastically developed and broadly employed for the design of human machine system, human system interface was somehow digitalized. Actually the operator's working environment employing the digital devices are not be fully digitalized due to its technical constraints so that it has been changed to the hybrid environment which has a combination of digital and analog elements. The hybrid environments need to study its characteristics and the guidelines for the proper design and evaluation purpose. This paper describes the human factor design elements of the console operated under hybrid environment through studying the characteristics of digital and analog environment based on the related human factor guidelines and literatures. The result of this paper implies the contribution to the evaluation of the generic human working environment which digital and analog elements are jointly used.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.3
• /
• pp.589-599
• /
• 1997

The purpose of this study was to investigate compostion factor and special qualities of design about Korean clothing image. The 72 samples were obtained from domestic fashion magazines. The questionnaire, which was composed 23 semantic diffrential bi-polar scales, was distributed to 50 female students majoring in Clothing and Textiles. The data were analyzed through factor analysis, anova, scheffe's test, clust analysis. The results were as follows; 1) Through factor analysis about Korean clothing image, 5 factors were identified; elegance, simplicity, femininity, tradition, looseness. 2) By cluster analysis, 3 clusters were determined according to Korean clothing image. Special qualities of design about Korean clothing image showed that there were lots of H silhouette in clothing form, related harmony in color harmony, somewhat rough and crude in texture and simple design in decoration. Top was more or less fit and bottom was found somewhat exaggerated tendency in fitness. 3) As a result of the visual evaluation about Korean clothing image, there were significant differences in all factors.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1998.11a
• /
• pp.151-155
• /
• 1998

In this paper it is examined the validity of luminance-to-illuminance conversion factor in the roadway lighting design. Luminance and illuminance distribution patterns were measured to yield the calculated conversion factor on the newly-constructed highway, and this value was compared to the conversion factor commonly used. We found that some discrepancy might exist between them due to difference in the values between the luminance yield factor and the coefficient of utilization. Therefore this fact must be fully understood in the roadway lighting design process.

• Steel and Composite Structures
• /
• v.14 no.6
• /
• pp.621-636
• /
• 2013

Response modification factor is one of the seismic design parameters to consider nonlinear performance of building structures during strong earthquake, in conformity with the point that many seismic design codes led to reduce the loads. In the present paper it's tried to evaluate the response modification factors of dual moment resistant frame with buckling restrained braced (BRB). Since, the response modification factor depends on ductility and overstrength; the nonlinear static analysis, nonlinear dynamic analysis and linear dynamic analysis have been done on building models including multi-floors and different brace configurations (chevron V, invert V, diagonal and X bracing). The response modification factor for each of the BRBF dual systems has been determined separately, and the tentative value of 10.47 has been suggested for allowable stress design method. It is also included that the ductility, overstrength and response modification factors for all of the models were decreased when the height of the building was increased.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.1
• /
• pp.64-70
• /
• 2010

This paper presents how to decide on tuning factor(${\delta}$) and quality factor(Q) values in design of single-tuned passive harmonic filters. Tuning factor(${\delta}$) and quality factor(Q) values have to consider before decision on circuit parameters of passive filters. A Study on these two value has not been scarcely performed and only experienced values has been used in passive harmonic filter design by far. As a experienced value, in cases of 5th and 7th filter, tuning factor(${\delta}$) is about 0.94 and 0.96 respectively and quality factor(Q) is, in all cases of, 50. If Single-tuned passive harmonic filter will be off-tuned, performance of filter will be decreased steeply and occur to parallel resonance between system reactance and filter capacitance. Therefore During the operation, In order not to off-tuning, Filter must be tuned at former order than actual tuning order. This is the same that total impedance of filter must have a reactive impedance. In this paper, Tuning factor(${\delta}$) is decided via example of real system and using the bode-plot and then performance of filters confirmed by filter current absorbtion rate. And Quality factor(Q) decided using the bode plot in example system and then performance of filters confirmed by filter current absorbtion rate also, which makes a calculated filter parameters to satisfy IEEE-519 distortion limits. Finally, Performance of the designed passive harmonic filter using the tuning factor(${\delta}$) and quality factor(Q) values, decided in this paper is verified by experiment and shows that 5th, 7th, 9th, 11th and 13th current harmonic distortions are decreased within IEEE-519 distortion limits, respectively.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.67-70
• /
• 2002

In this paper, we have researched a Automatic Power Factor Correction and THD reduction System for the multiple connection of CFL. Also in this paper, the power factor has been researched for the design of CFL, found the reason why the power factor is low and THD is too high. This paper has designed the PFC System for the multiple connection of CFL, and then we have increased the power factor and reduced the total harmonic distortion, by implementing them.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.1
• /
• pp.56-58
• /
• 2002

A closed form expression for the quality factor of the spiral inductor, methodologically, is presented as a function of the inductance ($L_{ind}$), metal-line width (W), spacing (S), inner and the diameter ($D_i$). For a given inductance, the dependences of quality factor on W, S, and $D_i$ are analyzed, and suggested the design optimization guidelines.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.5 s.142
• /
• pp.585-594
• /
• 2005

The purpose of this study was to analyze the situations and satisfaction of fashion design education in Busan, and the way to promote it. Data were collected from 192 college(university) students and 185 vocational students living in Busan and analysed by frequency analysis, factor analysis, Cronbach's $\alpha$, multiple regression, and t-test. The results are as follow; 1. Factor analysis has extracted three factors: environmental factors, student factors and quality of education factors. 2. The biggest factor that affects the satisfaction level of the education fumed out to be the student factors, followed by the environmental factors. 3. Demonstrated that vocational students were more satisfied with their education and had a higher degree of pride and confidence in their educational factors and level of satisfaction than college(university) students. In conclusion, we must encourage the industrial-educational corporation to promote the practicality of the fashion design education system and make diversification and specialization of the curriculum of fashion design education to cultivate students of talent.