• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.35-38
• /
• 2005

The Objective of this work was to design Composite Antenna Structures (CAS) and investigate impact behavior of CAS which was various curvature. This term, CAS, indicates that structural surface becomes antenna. Constituent materials were selected considering electrical properties, dielectric constants and tangent loss as well as mechanical properties. For the antenna performance, microstrip antenna layers inserted into structural layers were designed for satellite communication at the resonant frequency of 12.5 GHz and final demonstration article was. After making five kinds of curved CAS, which radii of curvature are flat, 200, 150, 100, 50 mm. The antenna performance changed in accordance with variation of curvature. The Reflection coefficient was independent of curvature but the gain decreased with the radius of curvature. The impact test equipment was Dyna-8250 drop weight tester. The impact characteristic in accordance with curvature is maximum absorb energy is same each other. The impact energy was 8.5 J. For various Impact energy test, five energy levels 3 J, 5 J, 7 J, 10 J, 20 J were used. The performance of impact damaged antenna was estimated by measuring the return loss and the radiation pattern. It was revealed that the performance of antenna was not related to the impact damage. Because the impactor did not damage the patch directly. CAS have good impact stability for the antenna performance.

• 소음진동
• /
• 제8권4호
• /
• pp.632-642
• /
• 1998

A method based on finite element discretization is developed for optimizing the polarization profile of PVDF film to create the modal transducer for specific modes. Using this concept, one can design the modal transducer in two-dimensional structure having arbitrary geometry and boundary conditions. As a practical means for implementing this polarization profile without repoling the PVDF film the polarization profile is approximated by optimizing electrode patterns, lamination angles, and poling directions of the multi-layered PVDF transducer. This corresponds to the approximation of a continuous function using discrete values. The electrode pattern of each PVDF layer is optimized by deciding the electrode of each finite element to be used or not. Genetic algorithm, suitable for discrete problems, is used as an optimization scheme. For the optimization of each layers lamination angle, the continuous lamination angle is encoded into discrete value using binary 5 bit string. For the experimental demonstration, a modal sensor for first and second modes of cantilevered composite plate is designed using two layers of PVDF films. The actuator is designed based on the criterion of minimizing the system energy in the control modes under a given initial condition. Experimental results show that the signals from residual modes are successfully reduced using the optimized multi-layered PVDF sensor. Using discrete LQG control law, the modal peaks of first and second modes are reduced in the amount of 12 dB and 4 dB, resepctively.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.404-407
• /
• 2009

Bluetooth Video Distribution Profile (VDP) defines the protocol and procedures that realize the distribution of video content compressed in a specific format for the efficient use of the limited bandwidth. In this paper, we describe the design of VDP tester based on TTCN-2 (Tree and Tabular Combined Notation), a language standardized by ISO for the specification of tests for real-time and communicating systems. Our work was carried out as a part of supporting a new profile testing module for VDP in PTS (Profile Tuning Suite), a reference test system for Bluetooth interoperability testing. Test demonstration for the interoperability with various VDP solutions at the PTS session in UPF30 (Unplug Fest) showed the validity of the developed tester. Eventually, we introduce the PTS architecture, and show the design and implementation of VDP tester included in the released PTS 3.0 in this paper.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.239-246
• /
• 2014

Incineration is conceptually sound as a waste treatment technology. There is, however, concern over its emissions when it is improperly designed and operated. An electrostatic precipitator is one of the most commonly used devices to control particulate emissions from boilers, incinerators and some other industrial processes. In this work, a modular electrostatic precipitator with sizing of $1m{\times}1m{\times}1m$ was developed for removal of particulate matter from the exhaust gases of a small waste incinerator. Its design was based on a simple wire-and-plate concept. The corona discharge wires were connected to a positive high-voltage pulse generator, while the collection plates were grounded. The high-voltage pulse generator was used to produce the corona discharge field between the individual discharge wire and the collection plate. The particulate-laden exhaust gas flow was directed across the corona discharge field. The charged particles were deflected outward and collected on the plate. The collection efficiency was evaluated as a mass loading ratio between the difference at the inlet and the outlet to the particulate loading at the inlet of the precipitator. The collection efficiency of this modular electrostatic precipitator design was approximately 80 %.

• 산경연구논집
• /
• 제9권8호
• /
• pp.27-34
• /
• 2018

Purpose - This paper discussed and illustrated the most efficient method to calculate the distribution centers for a national project in China. Through demonstration of implementing the GIS, spatial analysis, and location calculation model, this paper mainly dealt with the construction distribution problem and inconvenient supply of materials problems. Research design, data, and methodology - In this paper, the research design structure based on three steps: implementing the Geographic Information System to locate the points coordination data, calculating the distribution centers of the project, and optimizing the most efficient and effective coordination. The data of the calculation is from an actual project. The methodology of this paper is summarizing the spatial analysis capabilities and digital graphic data calculation to locate logistics distribution centers, and since the illustration of the calculation is useful for locating the coordination, the result of this paper has certain reference values for the project construction. Results - This paper illustrates the steel and cement resource of every distribution point to confirm the most efficient distribution center location coordination. Conclusions - The integrated logistical management models are used to ensure the results for the purposes of our calculation. The result of the calculation is also a useful example for future Chinese national projects.

• 한국항공우주학회지
• /
• 제31권10호
• /
• pp.34-39
• /
• 2003

본 논문에서는 압전작동기 LIPCA를 이용하여 형상가변익을 제작하였고, 제작된 형상가변익의 작동변위에 관하여 연구를 수행하였다. 등가 열 모델링 방법과 MSC/NASTRAN으로 해석을 수행하여 압전작동기의 작동변위를 예측하였고, 이를 바탕으로 형상가변익의 설계와 제작을 수행하였다. 실험을 통해 제작된 형상가변익의 실제 작동변위는 압전세라믹의 재료 비선형성으로 인해 예측된 값보다 크게 나옴을 확인하였다. 압전작동기 LIPCA를 이용한 형상가변익은 작은 크기의 무인비행기나 초소형비행기의 조종면으로 사용될 수 있다.

• Corrosion Science and Technology
• /
• 제12권4호
• /
• pp.179-184
• /
• 2013

Pipe wall thinning caused by erosion and corrosion can adversely affect the operation of aged nuclear power plants. Some injured workers owing to pipe rupture has been reported and power reduction caused by unexpected pipe damage has been occurred consistently. Therefore, it is important to develop erosion-corrosion damage prediction model and investigate its mechanisms. Especially, liquid droplet impingement erosion(LDIE) is regarded as the main issue of pipe wall thinning management. To investigate LDIE mechanism with corrosion environment, we developed erosion-corrosion damage simulation apparatus and its capability has been verified through the preliminary damage experiment of 6061-Al alloy. The apparatus design has been based on ASTM standard test method, G73-10, that use high-speed rotator and enable to simulate water hammering and droplet impingement. The preliminary test results showed mass loss of 3.2% in conditions of peripheral speed of 110m/s, droplet size of 1mm-diameter, and accumulated time of 3 hours. In this study, the apparatus design revealed feasibility of LDIE damage simulation and provided possibility of accelerated erosion-corrosion damage test by controlling water chemistry.

• Journal of electromagnetic engineering and science
• /
• 제11권3호
• /
• pp.143-151
• /
• 2011

This paper presents a survey of recent wireless power transfer systems. The issue of wireless power transfer is to achieve a highly efficient system with small positioning errors of the facilities setting. Several theories have been presented to obtain precise system design. This paper presents a summary of design theory for short range power transfer systems and detailed formulations based on a circuit model and an array of infinitesimal dipoles. In addition to these theories, this paper introduces a coil array scheme for improving the efficiency for off axis coils. In the microwave range, tightly coupled resonators provide a highly efficient power transfer system. This paper present san-overlay resonator array consisting of half wavelength microstrip line resonators on the substrate with electromagnetically coupled parasitic elements placed above the bottom resonators. The tight couplings between the waveguide and the load resonator give strong power transmission and achieve a highly efficient system, and enables a contact-less power transfer railroad. Its basic theory and a demonstration of a toy vehicle operating with this system are presented. In the last topic of this paper, harmonic suppression from the rectenna is discussed with respect to acircular microstrip antenna with slits and stubs.

• 한국광학회지
• /
• 제19권3호
• /
• pp.237-241
• /
• 2008

전자 논리회로에서 이용되는 전자신호 암호화와 같은 방법으로, 반도체 광 증폭기 XOR논리 게이트를 이용한 전광 암호화 시스템을 제안하였다. 시스템의 변수를 최적화 하고 전체 디자인 과정을 빠르게 수행하기 위해 정상상태와(steady state) 과도상태에(dynamic) 대한 전산모사가 차례로 이루어졌다. 심각한 신호 왜곡이 없이 10 Gbps 속도에서 일반적인 반도체 광 증폭기의 연속적 연결을 통해 전광 신호에 대한 암호화와 해독이 수행될 수 있음을 전산모사와 실험에 의한 결과를 통해 보여주었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.173-176
• /
• 2010

75톤급 가스발생기 기술검증시제에서 나타난 산화제 분사기 차압의 증가 원인을 파악하기 위하여 축소형 가스발생기를 설계, 제작하였다. 설계점 및 탈설계점 시험 조건을 포함한 총 6회의 연소시험을 성공적으로 수행하였다. 연소시험 결과 연소압을 고정한 후 혼합비를 증가시킨 경우 연료 및 산화제 유량계수는 일정한 것으로 나타났으며, 혼합비를 고정한 후 연소압을 증가시킨 경우에도 연료 및 산화제 유량계수는 변함이 없는 것으로 파악되었다.