• 설비공학논문집
• /
• 제14권2호
• /
• pp.134-142
• /
• 2002

LCC (Life-Cycle Cost) analysis is a practical method and a guideline for evalua-ting the economic performance of building service systems. By using the LCC analysis, the most cost-effective design decision can be made, which has the lowest LCC during the project study period among the various design alternatives. The present case shows an example of appro-priate use of the LCC analysis, by demonstrating the procedures of decision making among at-tarnative building HVAC systems at community center and congress hall of a local government.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제13권4호
• /
• pp.324-335
• /
• 2013

This article presents the design, control, and implementation of a small quad-rotor system under the practical limitation of being cost effective for private use, such as in the cases of control education or hobbies involving radio-controlled systems. Several practical problems associated with implementing a small quad-rotor system had to be taken into account to satisfy this cost constraint. First, the size was reduced to attain better maneuverability. Second, the main control hardware was limited to an 8-bit processor such as an AVR to reduce cost. Third, the algorithms related to the control and sensing tasks were optimized to be within the computational capabilities of the available processor within one sampling time. A small quad-rotor system was ultimately implemented after satisfying all of the above practical limitations. Experimental studies were conducted to confirm the control performance and the operational abilities of the system.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.329-330
• /
• 2021

The calculation of the correct construction value in the construction should be investigated after the quantity is calculated. In order to calculate the quantity requires a lot of cost and time, and the initial accurate quantity calculation is not possible. Therefore, in the planning step in order to successfully complete the project to demonstrate the practicality of the difference between the construction cost by the construction design by presenting a method for calculate the quantity through the estimate with the construction open, floor plan, surface view, section.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.329-330
• /
• 2023

The performance of the construction project is to be evaluated within 60 days of completion, according to relevant laws. It evaluates cost, construction period, design change, re-construction, safety, etc. for each project stage. And the project owners are inputting the evaluation results of the construction work into the construction project information system(CALS). The post-evaluation result information entered in this way can be referred to in the basic design of the construction project by referring to the related contents if there is a similar construction in the future. And It can also be used to predict and respond to the required period and cost by analyzing the accumulated data. In this study, in order to provide reference data that can be used in similar projects in the future, the latest analysis methods are reviewed and the possibility of future application is considered. Accordingly, this study intends to focus on the construction cost part among the indicators such as construction cost, construction period, design change, and re-construction that are currently being dealt with in post evaluation.

• 대한안전경영과학회지
• /
• 제3권3호
• /
• pp.221-230
• /
• 2001

The assembly tolerance design methods have applied linear or nonlinear programming methods and used simulation method and search algorithms to optimize the tolerance allocation of each part in an assembly. However, those methods are only considered to the relationship between tolerance and manufacturing cost, which do not consider a quality loss cost for each part tolerance. In this paper, the integrated simulation model used genetic algorithm and the Monte-Carlo simulation method was developed for the allocation of the optimal tolerance considering the manufacturing cost and quality loss cost.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.246-248
• /
• 2006

This paper is concerned with non-fragile guaranteed cost state feedback controller design algorithm for descriptor systems with time-varying delay and static state feedback controller with multiplicative uncertainty. The considered uncertainties are norm-bounded and time delay is time-varying. Under the condition of controller gain variations, conditions for the existence of controller satisfying asymptotic stability and non-fragility and controller design method are derived via LMI approach. Moreover, the measure of non-fragility and the upper bound to minimize guaranteed cost function are given.

• 산업경영시스템학회지
• /
• 제22권50호
• /
• pp.231-241
• /
• 1999

Recent market competition forces the price to be determined in the design stage so that the design would meet the target price of the product. However, most commercial PDM(Product Data Management) systems currently in use lack such a cost estimation function. In this paper, we propose detailed structure and functions of a new approach to estimate the cost of new products using integrated BOM in PDM. Such system will reduce the total life cycle cost of the products to be designed.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2002년도 춘계학술대회
• /
• pp.227-230
• /
• 2002

This paper presents an analytic method of quality function deployment(QFD) that is to maximize customer satisfaction subject to technical and economic sides in process design. We have used Wasserman's normalization method and the analytical hierarchy process(AHP) to determine the intensity of the relationship between customer requirements and process design attributes. This paper also shows cost-quality model the tradeoff between quality and cost as a linear programming(LP) with new constraints that have designated special process required allocating firstly The cost-quality function deployment of piston ring is presented to illustrate the feasibility of such techniques.

• 대한안전경영과학회지
• /
• 제4권2호
• /
• pp.169-178
• /
• 2002

This paper presents an analytic method of quality function deployment(QFD) that is to maximize customer satisfaction subject to technical and economic sides in process design. We have used Wasserman's normalization method and the analytical hierarchy process(AHP) to determine the intensity of the relationship between customer requirements and process design attributes. This paper also shows cost-quality model the tradeoff between quality and cost as a linear programming(LP) with new constraints that have designated special process required allocating firstly. The cost-quality function deployment of piston ring is presented to illustrate the feasibility of such techniques.

• 한국CDE학회논문집
• /
• 제16권6호
• /
• pp.397-406
• /
• 2011

Since tolerance allocation in a mobile phone camera manufacturing process greatly affects production cost and reliability of optical performance, a systematic design methodology for allocating optimal tolerances is required. In this study, we proposed the tolerance optimization procedure for determining tolerances that minimize production cost while satisfying the reliability constraints on important optical performance indices. We employed Latin hypercube sampling for evaluating the reliabilities of optical performance and a function-based sequential approximate optimization technique that can reduce computational burden and well handle numerical noise in the tolerance optimization process. Using the suggested tolerance optimization approach, the optimal production cost was decreased by 30.3 % compared to the initial cost while satisfying the two constraints on the reliabilities of optical performance.