한국CDE학회논문집 (Korean Journal of Computational Design and Engineering)

  • 제16권6호
  • /
  • Pages.397-406
  • /
  • 2011
  • /
  • 2508-4003(pISSN)
  • /
  • 2508-402X(eISSN)
한국CDE학회 (Society for Computational Design and Engineering)
권호 표지

휴대폰용 카메라 렌즈 시스템의 공차최적설계

Tolerance Analysis and Optimization for a Lens System of a Mobile Phone Camera

  • 정상진 (한양대학교 대학원 기계공학과) ;
  • 최동훈 (한양대학교 최적설계신기술 연구센터 (iDOT)) ;
  • 최병렬 ((주)피도텍) ;
  • 김주호 ((주)삼성전기 OMS 사업부)
  • 투고 : 20110000
  • 심사 : 20110000
  • 발행 : 2011.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Since tolerance allocation in a mobile phone camera manufacturing process greatly affects production cost and reliability of optical performance, a systematic design methodology for allocating optimal tolerances is required. In this study, we proposed the tolerance optimization procedure for determining tolerances that minimize production cost while satisfying the reliability constraints on important optical performance indices. We employed Latin hypercube sampling for evaluating the reliabilities of optical performance and a function-based sequential approximate optimization technique that can reduce computational burden and well handle numerical noise in the tolerance optimization process. Using the suggested tolerance optimization approach, the optimal production cost was decreased by 30.3 % compared to the initial cost while satisfying the two constraints on the reliabilities of optical performance.

키워드

참고문헌

  1. Rimmer, M. P., "A Tolerancing Procedure Based on MTF," SPIE Meeting on Computer-Aided Optical Design, Optical Research Associates, San Diego, CA, August pp. 28-29, 1978.
  2. Grossman, L. W. and Faaland, R. W., "Minimum Resolution Specification of Intraocular Lens Implants Using the Modulation Transfer Function," Applied Optics, Vol. 32, No. 19, pp. 3497-3503, 1993. https://doi.org/10.1364/AO.32.003497
  3. Lee, S. H. and Kwak, B. M., "Reliability Based Design Optimization Using Response Surface Augmented Moment Method," 6th World Congress on Structural and Multidisciplinary Optimization, Rio de Janeiro, Brazil, 2005.
  4. Rahman, S. and Xu, H., "A Univariate Dimension-Reduction Method for Multi-Dimensional Integration in Stochastic Mechanics," Probabilistic Engineering Mechanics, Vol. 19, pp. 393-408, 2004. https://doi.org/10.1016/j.probengmech.2004.04.003
  5. Xu, H. and Rahman, S., "A Generalized Dimension-Reduction Method for Multi-Dimensional Integration in Stochastic Mechanics," International Journal for Numerical Methods in Engineering, Vol. 61, No. 12, pp. 1992-2019, 2004. https://doi.org/10.1002/nme.1135
  6. Lin, C. Y., Huang, W. H., Jeng, M. C. and Doong, J.L., "Study of an Assembly Tolerance Allocation Model Based on Monte Carlo Simulation," Journal of Materials Processing Technology, Vol. 70, pp. 9-16, 1997. https://doi.org/10.1016/S0924-0136(97)00034-4
  7. McKay, M. D., Beckman, R. J. and Conover, W. J., "A Comparison of Three Methods for Selecting Values of Input Variables in the Analysis of Output from a Computer Code," Technometrics, Vol. 21, No. 2, pp. 239-245, 1979.
  8. McKay, M. D., "Sensitivity and Uncertainty Analysis Using a Statistical Sample of Input Values," Uncertainty Analysis, Y. Ronen, ed., CRC Press, Boca Raton, Florida, Chap. 4, pp. 145-186, 1988.
  9. McKay, M.D., "Latin Hypercube Sampling as a Tool in Uncertainty Analysis of Computer Models," Proceedings of the 1992 Winter Simulation Conference, pp. 557-564, 1992.
  10. Yu, P. S., Yang, T. C. and Chen, S. J., "Comparison of Uncertainty Analysis Methods for a Distributed Rainfall-Runoff Model," Journal of Hydrology, Vol. 24, pp. 43-59, 2001.
  11. Helton, J. C. and Davis, F. J., "Latin Hypercube Sampling and the Propagation of Uncertainty in Analyses of Complex Systems," Reliability Engineering and System Safety, Vol. 81, pp. 23-69, 2003. https://doi.org/10.1016/S0951-8320(03)00058-9
  12. Helton, J. C., Johnson, J. D., Sallaberry, C. J. and Storlie, C. B., "Survey of Sampling-based Methods for Uncertainty and Sensitivity Analysis," SAND2006-2901, Sandia National Labortories, 2006.
  13. Choi, S. K., Grandhi, R. V., and Canfield, R. A., "Probabilistic Analysis," Reliability-based Structural Design, Springer, Chap. 3, 2007.
  14. Lee., S. H. and Chen, W., "A Comparative Study of Uncertainty Propagation Methods for Black-box-type Problems," Structural and Multidisciplinary Optimization Vol. 37, pp. 239-253, 2009. https://doi.org/10.1007/s00158-008-0234-7
  15. Grey, D. S., "Tolerance Sensitivity and Optimization," Applied Optics, Vol. 9, No. 3, pp. 523-526, 1970. https://doi.org/10.1364/AO.9.000523
  16. Grammatin, A. P. and Degen, A. B., "Evaluating the Ease of Manufacturing of Optical Systems," Soviet Journal of Optical Technology, Vol. 40, No. 7, pp. 464-465, 1973.
  17. Adams, G., Tolerancing of Optical Systems, Ph. D. Thesis, Imperial College, 1987
  18. Youngworth, R. N. and Stone, B. D., "Cost-based Tolerancing of Optical Systems," Applied Optics, Vol. 39, No. 25, pp. 4501-4512, 2000 https://doi.org/10.1364/AO.39.004501
  19. Youngworth, R. N. and Stone, B. D., "Elements of Cost-based Tolerancing," Optical Review, Vol. 8, No. 4, pp. 276-280, 2001. https://doi.org/10.1007/s10043-001-0276-1
  20. Cassar, G., Vigier-Blanc, E. and Lepine, T., "Improved Tolerancing for Production Yield Anticipation of Optical Micro-modules for Cameraphones," Optical Design and Engineering III, 2008.
  21. Kehoe, M., "Tolerance Assignment for Minimizing Manufacturing Cost," International Optical Design Conference, 2010.
  22. CODE V 9.70 Reference Manual, Optical Research Associates, ed., 2007.
  23. PIAnO User's Manual, Version 3.0, FRAMAX Inc., ed. 2010.
  24. Hong, K. J., Kim, M. S. and Choi, D. H., "Efficient Approxi-mation Method for Constructing Quadratic Response Surface Model," KSME International Journal, Vol. 15, No. 7, pp. 876-888, 2001.
  25. Choi, H. I., Lee, Y., Choi, D. H. and Maeng, J.S., "Design Optimization of a Viscous Micropump with Two Rotating Cylinders for Maximizing Efficiency," Structural and Multidisciplinary Optimization, Vol. 40, No. 1-6, pp. 537-548, 2010. https://doi.org/10.1007/s00158-009-0373-5
  26. Conn, A. R., Gould, N. I. M. and Toint, P. L., Trust-region Methods, SIAM, 2000.
  27. Powell, M. J. D., "Convergence Properties of a Class of Minimization Algorithms," Nonlinear Programming, Academic Press, 1975.