• 전기의세계
• /
• 제22권2호
• /
• pp.70-74
• /
• 1973

This paper dealt with circuit modeling of SCR and gate turn-off SCR by using complementary symmetrical tansistor circuit, which is modified circuit of input current dependent, current stable negative resitance circuit. Operation of this circuit is estimated and analyzed, with which compared with conventional SCR modeling circuit. Also operation and the design procedures are checked by experiments.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.521-522
• /
• 2006

This paper presents behavioral models using SIMULINK and Verilog-a for a PLL based fractional-N frequency synthesizer. The SIMULINK modeling was built in the frequency-time mixed domain whereas the Verilog-a modeling was built purely in the time domain. The simulated results of the two models were verified to show the same performance within the error tolerance. This top-down design method can provide the readiness for the transistor-level design.

• 대한전기학회논문지
• /
• 제43권2호
• /
• pp.206-215
• /
• 1994

A method for simulating general characteristics and temperature characteristics of discharging SCR of the capacitor discharge impulse magnetizer-magnetizing fixture system using SPICE is presented. This method has been developed which can aid the design, understanding and inexpensive, time-saving of magnetizing circuit. As the detailed characteristic of magnetizing circuit can be obtained, the efficient design of the magntizing circuit which produce desired magnet will be possible using our SPICE modeling. Especially, computation of the temperature rise of discharging SCR is very important since it gives some indication of thermal characteristic of discharging circuit. It is implemented on a 486 personal computer, and the modeling results are checked against experimental measures. The experimental results have been achived using 305[V] and 607[V] charging voltage, low-energy capacitor discharge impulse magnetizer-magnetizing fixture of air cleaner DC motor.

• The Journal of the Acoustical Society of Korea
• /
• 제24권3E호
• /
• pp.77-86
• /
• 2005

This paper shows one and two dimensional active linear modeling of cochlear biomechanics using Hspice. The advantage of the Hspice modeling is that the cochlear biomechanics may be implemented into an analog Ie chip. This paper explains in detail how to transform the physical cochlear biomechanics to the electrical circuit model and how to represent the circuit in Hspice code. There are some circuit design rules to make the Hspice code to be executed properly.

• ETRI Journal
• /
• 제28권2호
• /
• pp.182-190
• /
• 2006

The circuit modeling of interdigitated capacitors fabricated by high-k low-temperature co-fired ceramic (LTCC) sheets was investigated. The s-parameters of each test structure were measured from 50 MHz to 10 GHz, and the modeling was performed using these measured sparameters up to the first resonant frequency. Each test structure was divided into appropriate building blocks. The equivalent circuit of each building block was composed based on the partial element equivalent circuit (PEEC) method. Modeling was executed to optimize the parameters in the equivalent circuit of each building block. The validity of the extracted parameters was verified by the predictive modeling for the test structures with different geometry. After that, Monte Carlo analysis and sensitivity analysis were performed based on the extracted parameters. The modeling methodology can allow a device designer to improve the yield and to save time and cost for the design and manufacturing of devices.

• 한국수소및신에너지학회논문집
• /
• 제33권3호
• /
• pp.226-231
• /
• 2022

Power converter are usually equipped for fuel cell power generation system to connect alternating current (AC) electric power grid. When converting direct current (DC) of fuel cell power source into AC, the power converter has a frequency ripple, which affects the fuel cell and the grid. Therefore, an equivalent circuit having dynamic characteristics of fuel cell power, for example, impedance, is useful for designing an inverter circuit. In this study, the current, voltage and impedance characteristics were calculated through fuel cell modeling and validated by comparing them with experiments. The equivalent circuit element values according to the current density were formulated into equations so that it could be applied to the circuit design. It is expected that the process of the equivalent circuit modeling will be applied to the actual inverter circuit design and simulated fuel cell power sources.

• Journal of Electrical Engineering and Technology
• /
• 제6권2호
• /
• pp.270-274
• /
• 2011

This paper presents a parameterized simulation program with integrated circuit emphasis (SPICE) model of a two-level microbolometer based on negative-temperature-coefficient thin films, such as vanadium oxide or amorphous silicon. The proposed modeling begins from the electric-thermal analogy and is realized on the SPICE modeling environment. The model consists of parametric components whose parameters are material properties and physical dimensions, and can be used for the fast design study, as well as for the co-design with the readout integrated circuit. The developed model was verified by comparing the obtained results with those from finite element method simulations for three design cases. The thermal conductance and the thermal capacity, key performance parameters of a microbolometer, showed the average difference of only 4.77% and 8.65%, respectively.

• 한국컴퓨터산업학회논문지
• /
• 제5권1호
• /
• pp.177-182
• /
• 2004

소나 센서부 설계 시 개별 센서에 대한 정합회로의 설계는 전체 가중회로의 특성에 매우 큰 영향을 미친다. 그러나 많은 경우 정합회로를 설계하는데 있어서 경험에 의한 수작업으로 수행하거나 매우 간단한 모델을 설정하여 그것을 바탕으로 설계하는 예가 많다. 다양한 센서에 대해서 유연하게 대응하는데 한계를 갖고 있고 또 많은 오류를 동반하기 때문에 정합회로 설계에 많은 시행착오를 초래한다. 본 연구에서는 다양한 센서에 유연하게 대응하는 정합회로 설계 도구를 구성하는 첫 단계로써 실제 소나 센서의 특성 측정 및 그를 바탕으로 한 소자 모델링을 일괄 작업화한 설계 프로그램을 구성하여, 그 구성과 기능에 대해서 설명하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.600-602
• /
• 2006

Some abnormal signals diagnostics and analysis through an important equivalent circuits modeling for passive elements under severe accident conditions have been performed. Unlike the design basis accidents, there are inherently some uncertainties in the instrumentation capabilities under the accident conditions. So, the circuit simulation analysis and diagnosis methods are used to assess instruments in detail when they give apparently abnormal readings as an accident alternative method. The simulations can be useful to investigate what the signal and circuit characteristics would be when similar to a variety of symptoms that can result from the environmental conditions such as high temperature, humidity, and pressure condition. In this paper, a new simulator through an analysis of the important equivalent circuits modeling under temperature accident conditions has been designed, the designed simulator is composed of the LabVIEW code as a main tool and the out-put file of the Multi-SIM code as an engine tool is exported to in-put file of the LabVIEW code. The procedure for the simulator design was divided into two design steps, of which the first step was the diagnosis method, the second step was the circuit simulator for the signal processing tool. It has three main functions which are a signal processing tool, an accident management tool, and an additional guide from the initial screen. This simulator should be possible that it could be applied a output signal analysis to some transient signal by variation of the resistance passive elements in the R-L-C equivalent circuit modeling under various degraded conditions in NPPs.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.171-174
• /
• 2005

The circuit simulation analysis and diagnosis methods are used to instruments in detail when they give apparently abnormal readings. In this paper, a new simulator through an analysis of the important circuits modeling under severe accident conditions has been designed, the realization for a body work instead of the two sorts of the Labview & Pspice as an one order command in the Labview program. The program can be shown the output graph form the circuit modeling as an order commend. The procedure for the simulator design was divided into two design steps, of which the first step was the diagnosis methods, the second step was the circuit simulator for the signal processing tool. It has three main functions which are a signal processing tool, an accident management tool, and an additional guide from the initial screen.