• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.5
• /
• pp.86-95
• /
• 2003

It had been strictly prohibited to plant in waterway according to Korea laws and regulations. It was then made possible to plant by the modification law and regulation of 10/30/1997. In 2000, the Seoul metropolis government planted in the Yeoyido flood plain park in Han river by way of showing the model case. This planting design is for the Yeoyido flood plain park along the Han river, in Seoul. The design requirements were to create a pleasant rest area, to improve the surrounding landscape, and to create diverse ecological habitats by planting within the stability of flood flow. This design emphasizes the following design requirements that has positive effect on stabilizing flood flow. First, planting suitable in a area was determined by the speed of a current of less than 0.7m/sec under various numerical value simulations. Second, plants were selected in existing trees of the present and the past Han river, as well as the questionnaire results from landscape professional engineers and professors. Shade plants were planted in the large visiting areas so as to offer pleasant shade in the summer, the ecological planting pattern was applied in the area with low speed of flood flow, so as to aid the restoration of the natural ecological environment. It was found that the foresaid planting design verified the stability of flood flow and wind by overturn limit moment calculation. It is expected that this plan would serve environmentally friendly planting plans in flood plain park.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.571-572
• /
• 2006

RTP (rapid thermal pressing), one of micro-pattern replication techniques like hot embossing, is focused on achieving shorter cycle time. DFSS(Design for Six Sigma) has been applied in order to enhance the completeness of the development process for RTP system. According to DIDOV roadmap, we derived design concepts and subsequently decided the main performances, design factors, and components for RTP system. In the design process of RTP system using finite element analysis, it was realized that its structural characteristics affect large area replicability. Optimizing structural design factors, based on CAE, it was checked out that its large area replicability could be improved in a virtual test. Finally, we have a plan to validate the large area replicability of the developed RTP system, by performing micro-pattern replication tests with polymeric sheets.

• Korean Institute of Interior Design Journal
• /
• no.32
• /
• pp.36-46
• /
• 2002

The purpose of this study is to find the characteristics of bathroom through the latest apartment model house, and to investigate the types of design element in bathroom space, that is equipment material, measurement, and shape. Also, this study compare the changes in bathroom investigated through the theoretical study and understand the general design characteristics of modern bathroom. Design characteristics of bathrooms of 19 apartment model houses that are 30pyong to 60pyong model in the south area of the Han river and new city area, Boon-dang were analyzed based on previous studies. The result of the study is as follows. 1) The most remarkable change of bathroom can be found in equipment. The type of bathroom equipment, materials, forms, size have been changing diversely. 2) In addition, the function of bathroom has been changing. Bathroom is not only sanitary place but also place for rest, health-care, beauty-care, storage, and it is possible to add health improving function. 3) On the other hand, $\ulcorner$washstand ＋ toilet ＋ shower booth$\lrcorner$ type is common for family-bathroom, and separate type of $\ulcorner$washstand ＋ toilet ＋ bathtub ＋ shower booth ＋ Powder room ＋ dress room$\lrcorner$type is most common for master-bathroom.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.623-628
• /
• 1986

This paper reviews various CAD(Computer-Aided design) or DA(Design Automation) procedures for specification, design and verification of VLSI chips. The growth and widening of engineering achievements and applicational varieties in this revisited field has been truly explosive for the last five years. Recent trends in VLSI/CAD area and their possible implications on the future evolution of DA society are briefly touched upon. The relative importance of chip specification and design capability within the whole Korean electronics infrastructure in the future is explained with several possible suggestions for coping with upcoming difficulties already being seen in this challenging yet promising area.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.793-798
• /
• 2005

The performance functions of a suspension must provide often place conflicting demands upon rail bogie design since design parameters which may be altered to improve performance in one area may simultaneously reduce performance in another area. To determine compromised design parameters, it is need to carry out a number of simulations and trade-off studies. The suspension design system based on computer simulations is presented. The system is composed of analysis solvers and GUI which have functions such as modeling, analysis and sensitivity analysis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.397-407
• /
• 2017

This study investigated current status of rest area for drowsy drivers on the highways and drew the related issues to define specifications and design criteria regarding expressway rest area for drowsy drivers on the highways. Based on the investigation result, geometric structure specifications and improvement plans are suggested. The entry part of a rest area for drowsy drivers on the highways was divided into deceleration transition section, deceleration lane and entry connection road while the exit part was divided into exit connection road, acceleration lane and acceleration transition section. The optimum length was estimated by considering the main lane vehicle traveling speed, traveling speed at the beginning/end point of entry/exit connection roads, deceleration and acceleration. In addition, reasonable design criteria were suggested by dividing the parking section of rest area for drowsy drivers according to parking style and cross-section composition, and length of parking space and then considering the ratio of vehicles using rest area for drowsy drivers, the ratio of heavy vehicles, and the design speed within a rest area for drowsy drivers. It is believed that the suggested design criteria on rest area for drowsy drivers on the highways can be utilized in the future planning and maintenance of rest area for drowsy drivers. Additionally, the defined criteria on installing rest area for drowsy drivers on the highways will prevent traffic accidents in resting facilities and highways as well as improve usage and safety of them.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.8
• /
• pp.645-651
• /
• 2015

The objective of this study is to experimentally investigate the effect of design parameter on the mass ratio of a central-driven ejector. The design parameters are the primary nozzle area and distance ratios, diffuser exit-area ratio and mixing-tube length ratio. The experimental setup was an open-loop continuous circulation system which has a movable nozzle ejector, an electric motor-pump, a water tank, a control panel and high-speed camera unit. We calculated the mass ratio using the measured primary and suction-flow rates with the experimental parameter of primary water-flow rate or pressure. The results showed that the mass ratio increased with the primary nozzle distance ratio and mixing tube length ratio, while the mass ratio decreased with the primary nozzle-area ratio and diffuser exit-area ratio.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.4
• /
• pp.75-82
• /
• 2015

The elderly rate in South Korea in 2015 is over 13.1%. Especially, the elderly rate in rural area is high. Senior community project in rural that is being promoted by the government. This study's purpose is to provide the reserch group-home for the elderly in Japan rural area. And this paper provided planning of group-home for the elderly in Korea rural area. For this study, respective 5senior housing of Korea and Japan were chosen as respresenting two nations, and every manager was interviewed on housing pattern. This study suggests the planning material as following. First, the effectiveness of the group-home are big. Especially, the elderly was far healthier. Design point is public space(living room, small living room, etc). Maybe, healthy group-home concept is that would be design by Korean traditional housing. Also important public space design is that would be inner courtyard-house, wood floor, Deachong, etc. Two group-homes will construct elderly welfare facilities in between. Otherwise that is need layout of a big public space. In the case of vacant house can used by considering of scale, structure, site condition. Closed school can used through so easy remodeling too. More often than not complex type(hospital, community heath center) was appeared in Japan rural area. In the case of Korea, recommend complex type in community health center and public building. In this case, considering communication, access, contact, group-home keeps on ground floor. In this paper, we hope to take a lesson from group-home planning source for the elderly in Korea rural area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.277-287
• /
• 2017

This paper describes the specifications on balanced steel ratio and maximum reinforcement for the design of RC flexural members by the Korean Highway Bridge Design Code based on limit states design. The Korean Highway Bridge Design Code (Limit States Design) is not provide for the balanced steel ratio specification for the calculation of required steel area of RC flexural members design. The maximum steel area limited the depth of the neutral axis at the ultimate limit states after redistribution of the moment, and also recommended the maximum steel area should not exceed 4 percent of the cross sectional area. However, from the maximum neutral axis depth provisions should increase the cross section is calculated to be less the maximum reinforcement area, and according to the 4% of the cross sectional area of the concrete, the tensile strain of the reinforcement is calculated to be greater than double the yielding strain, so can not guarantee a ductile behavior. This study developed a balanced reinforcement ratio that is basis for the required reinforcement calculation for tension-controlled RC flexural members design in the ultimate limit states verification provisons and material properties and applied the ultimate strain of the concrete compressive strength with a simple formular to be applied to design practice induced. And assumed the minimum allowable tensile strain of reinforcement double the yielding strain, and applying correction coefficient up to the ratio of maximum neutral axis depth, proposed maximum steel ratio that can be applied irrespective of the reinforcement yield strength and concrete compressive strength.

• Journal of the Korea Furniture Society
• /
• v.16 no.2 s.30
• /
• pp.13-26
• /
• 2005

A Culture is not the fashion that can be changed and created lightly. However, a small number of people are creating and leading the fashion for the foundation of a culture. For example, the fashion in Tokyo spreads across the nation, the fashion in Europe, USA and all over the world are under the influence of Paris, California and New York. Now, we should think about - what is the our consideration to be a member of the minority? What is the today's trend and how will be the future environment of interior, exterior and furniture design? Which one is the measure of the value for leading the culture? The answers in the design area are the creating new value and health in various design styles - Minimal, Organic, Multiple, Natural, Intelligent Life Style. Also this analysis of these trend should be more necessary for the space and environment design area of future than the furniture design area.