• Ecology and Resilient Infrastructure
• /
• v.5 no.4
• /
• pp.210-218
• /
• 2018

In this study, a real-scale stairway model was constructed to analyze the evacuation safety of human life due to the change of flooded stair flow. In the experiment, the water depth and flow velocity at each stage of the stairs were measured and the specific force per unit width was calculated. Using the calculated the specific force per unit width, the evacuation safety of each steps of stairs according to the change of the flooded stair flow was presented. Finally, the depth of water measured by the experiment and the evacuation safety graph of "Ishigaki" by the specific force per unit width were combined to analyze the evacuation safety by depth. As a result, it has been found that evacuation of adult man is difficult without help at the flow depth of 0.20 m or more. And it has been found that evacuation of adult women and elderly men are difficult without help at the flow depth of 0.15 m or more. Finally, it has been found that evacuation of elderly women is difficult without help at depth of 0.13 m or more.

• Land and Housing Review
• /
• v.14 no.3
• /
• pp.137-144
• /
• 2023

The amount of soil cutting, transported, and filing up the soil in the project area is considered to change the volume depending on the condition of the soil; the volume change rate of the soil is calculated by collecting undisturbed samples below 1 m to 2.0 m above the surface through test pits. In this study, large-scale field tests are carried out. There are areas with an excavation depth of 10m or more, but some errors have occurred in calculating the soil volume by uniformly applying the soil conversion factor for a depth of 1 to 2 m. According to the field tests, the earthwork volumes applied with the soil conversion factor for each depth increase by 3.9 to 9.4% compared to the soil volume applied uniformly with that of 2 m depth.

• Journal of Advanced Navigation Technology
• /
• v.28 no.1
• /
• pp.116-122
• /
• 2024

In this paper, course structure and course width were studied among the main performances of the system to derive the required performance of the modulation index, output power, and phase change specifications of the instrument landing system (ILS) localizer power amplifier. To satisfy the course structure's deviation standard (± 5 uA), the difference in depth of modulation (DDM) deviation standard of the carrier with sideband (CSB) amplifier was standardized to ± 1 uA(0.001 DDM). CSB 30 W power amplifier was designed, and through the modulation compensation circuit, sum in depth of modulation (SDM) is 40% ± 0.1% and DDM is ± 0.0005 DDM in the operating output range(45 dBm ~ 35 dBm). In addition, the course width and displacement sensitivity specifications were analyzed through simulation, and the ± 0.1° change applied during comissioning inspection, which is the most stringent standard, was applied. The output variation of the suppressed with sideband only ( SBO) amplifier was ± 2 mW or less, The phase was standardized to within ± 3 ° and the characteristics were satisfied. By applying a compensation circuit according to output power and temperature, stable modulation index, output, and phase characteristics were obtained.

• Journal of the Korean Ceramic Society
• /
• v.41 no.4
• /
• pp.344-347
• /
• 2004

The influence of spindle immersion depth on the determination of glass melt viscosity was examined in rotating cylinder method. The exact adjustment of spindle immersion depth into soda lime silicate standard glass melts could be peformed by self-constructed electric system. The results showed a slight dependence of viscosity value on the immersion depth change of spindle shaft. The viscosity error per unit length of spindle was 0.4%/mm under the present cylinder dimension.

• The Korean Journal of Ecology
• /
• v.17 no.4
• /
• pp.435-442
• /
• 1994

In the littoral zone of Lake Paltangho, a vegetation map of aquatic macrophytes was constructed to estimate their occupied area, and the change of abundance of submersed macrophytes was examined along water depth to elucidate niche perferences on the depth gradient. Total area of the littoral zone was 267 ha, of which submersed, emergent and floating-leaved macrophytes covered 155ha, 103 ha and 10ha, respectively. Submersed macrophytes were distributed within a water-depth of 2.5m, with an apparent pattern of zonation: Vallisnaria gigantea and Ceratophyllum demersum at the deeper water depth of 1.5~2.5m.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.4 no.2
• /
• pp.7-14
• /
• 1985

An experiment to investigate the rate of change of phase angle of eddy current output signal caused by outer surface defect of nonferromagnetic tube by variation of standard depth of penetration and variation of percent of tube wall penetration was carried out. The results of the experiment show that the phase angle of defect signal is increased with decreasing the standard depth of penetration or the depth of defect. The results also show that the phase angle is decreased with increasing the skin effect of eddy current, and that the resolution is decreased with decreasing the depth of defect.

• Journal of Sensor Science and Technology
• /
• v.15 no.1
• /
• pp.7-12
• /
• 2006

The multi-functional one-chip sensor has been fabricated to reduce output variation under various water environment. There were a temperature sensor, a piezoresistive type pressure sensor, and a electrode type conductivity sensor in the fabricated one-chip sensor. This sensor was measured water depth in the range of $0{\sim}180cm$, temperature in the range of $0{\sim}50^{\circ}C$, and salinity in the range of 0 $0wt%{\sim}5wt%$, respectively. Since the change of water depth in solution environment depends on various factors such as salinity, latitude, temperature, and atmospheric pressure, the water depth sensor is needed to be compensated. We tried to compensate the salinity and temperature dependence for the pressure in water by using lookup-table method.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.9
• /
• pp.863-871
• /
• 2004

The use of fossil fuels like coal, oil and natural gases around the world causes an increase of the carbon dioxide content in the atmosphere. In order to reduce the concentration of the greenhouse gas, the idea of carbon dioxide sequestration in the ocean is proposed to be an effective mitigation strategy to counteract potential global warming due to the greenhouse effect. Therefore, in the present study, calculations of the dissolution behavior of carbon dioxide when liquid carbon dioxide is released at 1,000m and 1,500m in depth by fixed pipeline are performed. The results show that carbon dioxide droplets change to carbon dioxide bubbles in gas phase around 500m in depth, and the droplets are completely dissolved below 500 m in depth if the liquide carbon dioxide is released both at 1,000 m in depth with the initial diameter of 0.007m or less and at 1,500m in depth with the diameter of 0.011m or less.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.119-120
• /
• 2008

A HMD type multi-focus 3D display system is developed and proof about satisfaction of eye accommodation is tested. Four LEDs(Light Emitting Diode) and a DMD are used to generate four parallax images at single eye and any mechanical part is not included in this system. The multi-focus means the ability of monocular depth cue to various depth levels. By achieving multi-focus function, we developed a 3D display system for only one eye, which can satisfy the accommodation to displayed virtual objects within defined depth. We could achieve a result that focus adjustment is possible at 5 step depths in sequence within 2m depth for only one eye. Additionally, the change level of burring depending on the focusing depth is tested by captured photos and moving pictures of video camera and several subjects. And the HMD type multi-focus 3D display can be applied to a monocular 3D display and monocular AR 3D display.

• Journal of Korea Multimedia Society
• /
• v.22 no.5
• /
• pp.547-557
• /
• 2019

To extract the depth map from a single image, a number of CNN-based deep learning methods have been performed in recent research. In this study, the GAN structure of Pix2Pix is maintained. this model allows to converge well, because it has the structure of the generator and the discriminator. But the convolution in this model takes a long time to compute. So we change the convolution form in the generator to a depthwise convolution to improve the speed while preserving the result. Thus, the seven down-sizing convolutional hidden layers in the generator U-Net are changed to depthwise convolution. This type of convolution decreases the number of parameters, and also speeds up computation time. The proposed model shows similar depth map prediction results as in the case of the existing structure, and the computation time in case of a inference is decreased by 64%.