• 대한통합의학회지
• /
• 제6권3호
• /
• pp.73-81
• /
• 2018

Purpose : This study identified knowledge, attitudes and behavior for radiation safety management of dental hygiene student. And to provide basic data for the development of effective education program for safety management for radiation protection. Methods : A questionnaire survey of questionnaires was conducted on the second and third grade dental hygiene students at three - year college in 'A' area of Gyeongnam province. The questionnaire of 37 items was used to investigate knowledge and attitude about radiation protection. The collected data were analyzed using frequency analysis, mean, standard deviation, t-test, ANOVA and pearson's correlation Analysis using the SPSS 21.0 program. Result : Results obtained from this study are as follows. 1. Knowledge level of radiation safety management by general characteristics showed statistically significant difference. 2. Radiation safety education knowledge score was higher in the case of radiation safety education(t=1.660, p<.05). 3. The radiation safety management attitude score was a statistically significant difference between the groups according to 'achievement' (F=1.660, p<.001). In the case of 'radiation protection facilities', there was a statistically significant difference between groups according to the recognition of radiation protection facilities (F=6.001, p<.001). 4. As a result of investigating the relationship between radiation safety management knowledge and attitude, the higher the knowledge level of radiation safety management, the higher the attitude(p<.001). Conclusion : Therefore, radiation safety management education should be organized systematically and it is required to improve not only safety management knowledge, attitude level but also action level.

• 대한치과기공학회지
• /
• 제10권1호
• /
• pp.67-88
• /
• 1988

The survey, which was examined analysed of the knowledge level and the actual condition of care for dental hygiene and the situation of dental remedy, surveying over 1974 pupils of eight elementary schools, especially the 4th, the 5th and the 6th school year, came to a conclusion as follows ; 1. The knowledge level of the pupils' dental hygiene was generally low but considerably high in upper school tear. 2. The rate of the boys who brushed their teeth every day was 61.8% among the boys, 68.5% among the girls. And the rate that they brushed their teeth before breakfast was yet 18.4%. 3. 45.1% of the boys and 60.4% of the gils used vertical technic using their toothbrush. 4. The rate of the boys who have ever suffered from toothache was 65.3%, that of the gils was 64.0%. And the eate of the boys who admitted to the remedy was 69.9%, that of the girls was 77.8%. 5. The rate of the boys who experienced the dental remedy was 43.0%, theat of the girls was 45.9%. In the place of the renedy, 46.4% of the boys and 45.7% of the girls cured at the Private Dental Clinic, 26.9% of the boys and 28.6% of the girls cured a Public Health Center. 6. The rate of the bous who had their teeth treated soon after dentist's advice was 34.4% that of the girls was 35.0%. 11.7% of the boys and 12.1% of the girls who would not have their teeth treated thought it was not just a serious disese. 7. 72.6% of the boys and 73.2% of the girls understood the notion of dental caries, and 96.4% of the boys and 97.3% of the girls understood the notion of the food makes a tooth decayed. 8. 54.3% of the boys and 47.5% of the girls knew the periodontal disease, and 18.3% of the boys and 17.0% of the girls knew the reason of the periodontal disease. 9. 86.0% of the boys and 86.7% of the girls recognized that the prevention against dental carise and periodontal disease should be taken. 10. 31.7% of the boys and 28.5% of the girls have experienced the prevention against dental caries and periodontal disease.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권2호
• /
• pp.131-139
• /
• 2005

The therapeutic goal of implant dentistry is not merely tooth replacement but total oral rehabilitation. Considering dental implants as a treatment option can be provided patients with positive, long-term results. Implant dentistry has gone through many phases over the years. Modern technology and design allows us to predictably place our dental implants often load the implants at the time of placement. The purpose of this study is to evaluate the implant stability after immediate loading in dogs. The control group was performed delay loading and experimental group was immediate loading. Each group was measured periotest value(PTV) to evaluate clinical mobility and performed radiographic examination to evaluate marginal bone loss. Statistically significant difference was not founded in control group between experimental group in PTV(P>0.05) and marginal bone loss(P>0.05). Finally, implant stability after immediate loading was similar to delay loading implant.

• 대한치과기공학회지
• /
• 제7권1호
• /
• pp.41-51
• /
• 1985

This study has been to survey the present situation of satisfaction to the occupation and dental laboratory by means of selscting 200 dental technicians who are woked in Pusan, Deagu, Kwangju, Deajun. Questionaires were distributed to them and the summerized results were as follows; 1. In general, the dental technician's satisfaction of the occpation was revealed as moderate(Mn, 2.83), the dental technician's satisfaction of the laboratory was revealas moderate(Mn, 2.80). The highest degree item out of the satisfaction of occpation was the outlook(Mn, 3.23), and the lowest degree item was the advancement and the rise to a high position(Mn, 2.22). The highest degree item out of the satisfaction of laboratory was dental material(Mn, 3.07), and the lowest degree item was the equipment of dust collection(Mn, 2.49) 2. By age, the highest degree item out of the satisfaction of occpation was 30 to 43 group(Mn, 3.28), 50 and over group was the lowest degree item(Mn, 2.89). The highest degree item out of the satisfaction of laboratory was 40 to 50 group(Mn, 3.10), the lowest degree item was 35 to 39 group(Mn, 2.88). 3. By school career, the satisfaction of occpation and dental laboratory were higher in the graduated college group than the graduated highschool group. 4. By personal health state, the highest degree item of the satisfaction of occpation was the health group(Mn, 3.25). The highest degree item of the satisfaction of laboratory was the unhealthy group(Mn, 3.07). 5. By religion, the satisfaction if iccupation of laboratory ws higher in the religious group than the non-religious group. 6. By job career, the highest degree item of occupation satisfaction was 15 to 20 years group(Mn, 3.27), the lowest degree item was 20 and over group(Mn, 3.02). The highest degree item out of the satisfaction of laboratory was 15 to 20 years group(Mn, 3.05), The lowest degree item was 7 to 10 years group (Mn, 2.90). 7. By job position, the highest degree item out of satisfaction of occupation was the chief of laboratory group(Mn, 3.33), the head of laboratory group was the lowest degree item(Mn, 3.07). The hightest degree item out of the satisfaction of laboratory was the head of laboratory group(Mn, 3.10), the lowest degree item was the chief of laboratory group(Mn, 2.88). 8. By the place of employment, the degree of occpational satisfaction by items was found that the highest degree in the group engagel in general hospital(Mm, 3.43), the group engaged in dental clinic and hospital(Mn. 3.24), and the dental laboratory group(Mn. 3.14) in order. The difference among the group was significant emough(P<0.05). The highest degree item out of the satisfaction of laboratory was dental laboratory group(Mn. 2.70). The difference among the group was significant emough(P<0.01). 9. By monthly salary, the highest degree item out of the satisfaction of occupation was ￦500,000 to 600,000 group(Mn. 3.32), the lowest degree item was ￦600,000 and over group(Mn, 3.07). The highest degree item out of the laboratory satisfaction was ￦100,000 to 200,000 group(Mn, 3.03), the lowest degree group was ￦300,000 to 400,000 group(Mn, 2.95). 10. As compared with the degree of satisfaction according to job satisfaction, the highest degree item out of the occupational satisfaction was much satisfied group(Mn, 3.65), the lowest degree item was non-satisfied group(Mn, 2.68). The difference among the group was significant enough(P<0.05). The highest degree item out of the satisfaction of laboratory was non-satisfied group(Mn, 30.9), the lowest degree item was satisfied group(Mn, 2.84). The difference among the group was significant enough(P<0.01).

• 대한치과기공학회지
• /
• 제36권4호
• /
• pp.277-296
• /
• 2014

Purpose: This study intends to set standard for organizing the curriculum of short-term dental technicians and the change of job environment, as well as the knowledge & training, by identifying the importance and actual job performance of dental technicians following job analysis in the university education of Dept. of Dental Laboratory Technology, and furthermore to foster junior executives to cope with modernization and globalization. Methods: The tools used in this study are based on the job analysis of research report suggested by National Health Personnel Licensing Examination Board(Lee Gyu-seon, 2011), and it consists of general characteristic 7 items. Every competence duty was measured through Likert 5 point gauging, and internal consistency through Cronbach's Alpha. The competence importance of entire questionnaire was .984 and its performance was .874, reflecting considerably high level, and in terms of each competence duty, high credibility was proved and high internal consistency was verified with competence importance ranging from the minimum .655 to the maximum .966 and its performance ranging from the minimum .677 to the maximum .993. Results: Competence importance and its performance in each duty on the job analysis of dental technicians were measured. In competence importance in each duty, the highest was "checking design order form"(average, 4.52), followed by "selling dental prosthesis"(average 4.49), "making removable orthodontic appliance"(average, 4.48), "open managing dental laboratory"(average, 4.46) in order. However, "making complete denture" was found the lowest(average, 4.23), with importance of all competence dutys was considerably high level. In the performance of its competence duty, "checking design order form"(average, 4.04) was found to be the most importance competence, followed by "making conservative restoration"(average, 4.00), "making porcelain"(average 3.98), "checking working cast"(average, 3.90) in order. However it was found out that "making fixed orthodontic appliance"(average, 3.12) was the lowest, and the importance of all competence dutys was quite high level. Conclusion: The duties of dental technicians consist of 13 kinds, in total, and it was found out that "checking design order form"(average, 4.52) was the most important in the competence importance and job performance. In particular, it was revealed that there was a great difference between the competence importance and its performance in the order of "selling dental prosthesis", "open managing dental laboratory", "making removable orthodontic appliance", "making CAD/CAM prosthesis", and then "making fixed orthodontic appliance".

• 디지털융복합연구
• /
• 제12권5호
• /
• pp.335-343
• /
• 2014

본 연구에서는 치위생과 학생들의 자아탄력성을 알아보고, 자아탄력성이 학업만족과 대학생활 적응에 미치는 영향을 파악하여, 자아탄력성 향상과 학업만족, 대학생활 적응을 향상시키기 위한 방안을 제시하고자 하였다. 대구 경북지역의 2개 대학교 치위생과 1, 2, 3학년 학생 369명을 대상으로 2013년 10월 1일부터 10월 31일까지 편의표본추출법에 의해 설문 조사하였다. 요인분석결과, 자아탄력성은 대인관계 효율성, 낙관적 태도, 감정통제, 자신감으로 구분되었고, 학업만족은 교과만족, 관계만족, 인식만족으로 구분되었으며, 자아탄력성이 높을수록 학업만족은 높았고, 자아탄력성과 학업만족이 높을수록 대학생활 적응은 높았다(p<0.001). 이에 대학생활 적응을 보다 증진할 수 있도록 대인관계 개선과 목표설정, 분노조절, 동기부여 등의 자아탄력성 조절능력 강화를 위한 지속적인 관심과 노력이 무엇보다 중요하다 할 수 있으며, 이와 관련한 학년과 학제에 맞는 지속적이고, 단계적인 교육 프로그램 개발을 비롯한 운영과 환경조성이 필요하다.

• 대한치과기공학회지
• /
• 제20권1호
• /
• pp.5-11
• /
• 1998

The purpose of this study is to evaluate the castability and surface roughness of the casts using Non-percious alloys. For samples of 25 wax patterns, it is made from eight layers of sheet wax, arranged in the escalating layers. After fabricated wax patterns, using 5 kinds of Ni-Cr alloys is casted, and the casts are sandblasted. To castability, magnifier is used and values of surface roughness of the casts is measured with profilometer(tracing length 1.75mm, cutoff value 0.25mm) The results are as follows : 1. The castanbility of alloys, in case of C alloys, showed with $8.0{\pm}0.0000$, and in case of CS alloys and N alloys showed equal with $7.8{\pm}0.4472$, respectively. T alloys and V alloys showed equal with $7.2{\pm}0.4472$, respectively. 2. The values of surface roughness of the casts are decreased more T alloys than in case of order alloys, and in order, increased in case of CS alloys, C alloys, V alloys, N alloys, respectively.

• 대한치과기공학회지
• /
• 제13권1호
• /
• pp.21-26
• /
• 1991

The mesiodistal crown diameters and crown length of the permanent anterior teeth have been studied and analyzed about the mean size, S.D, S.E etcs from stone models of 100 Korean male and 74 female. From the study, the following conclusions were made : 1. Statistical differences of left and right teeth were not found in the mesio distal crown diameters and crown length of the permanent anterior teeth. 2. The mean values of mesiodistal crown diameters of permanent anterior teeth were slightly larger in male than in females and statistical differences of males and females were found in maxillary right central incisor, mandibular left canine, mandibular right lateral incisor and mandibular right canine. 3. The mean values of crown length of permanent anterior teeth were slightly larger in male than in female and statistical differences of males and females were found in mandibular left canine, mandibular right canine. 4. Mesiodistal crown diameters and crown length of maxillary left lateral incisors and right lateral incisors of female are larger than that of male.

• 대한치과기공학회지
• /
• 제25권1호
• /
• pp.95-102
• /
• 2003

The purpose of this study was to show occlusion on the simple hinge articulator optionally mounted. Modelling of upper-lower jaw and simple hinge articulator were developed. This modelling of upper-lower jaw inserting wax bite was mounted imaginary on the modelling of simple hinge articulator by use of the computer simulation. From changes of THA(transverse horizontal axis)-incisor distance, Balkwill angle and THA deviation, eight types were mounted respectively. After removal of wax bite, upper-lower jaw position changing were compared with centric jaw relation. The results were as follows: 1. The change of THA-incisor distance had influence on mostly a vertical shift of upper jaw. 2. The change of Balkwill angle had influence on mostly a horizontal shift of upper jaw. 3. Inferior type in the THA deviations was the least shift of upper jaw. The above results suggest that the simple hinge articulator optionally mounted effect a shift of upper jaw.

• 대한치과기공학회지
• /
• 제13권1호
• /
• pp.5-8
• /
• 1991

There are many factors influence on the margin fitness of Casting body. Among them, I intend to examine the influence of the gap of temperature of investment's special liguid. As the result of investing and experiment of the whole of eighty copings under the classification the temperature of liquid into four groups 0$^{\circ}C$, 10$^{\circ}C$, 20$^{\circ}C$, 30$^{\circ}C$ I came to the conclusion as following. 1. The margin fitness of these four groups, as the result of examination with microscope, was the most accurate at 20$^{\circ}C$ was less aceurate in order of 30$^{\circ}C$, 10$^{\circ}C$, 0$^{\circ}C$. 2. directions is the way to preserve the most exact margin fitness.