• Proceedings of the Korean Society for Quality Management Conference
• /
• 2006.11a
• /
• pp.195-198
• /
• 2006

In this paper, we propose a 2dimension Control Chart. Suggested which Control chart augments Schwart Control chart which is 1-dimensional and Independent variable and dependent variable interrelationship by using control chart. Schwart control chart cannot use input variable and output variable together. In this paper, we try to analysis input variable and output variable dependent and effect. So called 2-dimensional control char.

• Biomedical Science Letters
• /
• v.22 no.4
• /
• pp.184-188
• /
• 2016

The objective of this study was to develop a pH dependent oral matrix tablet containing probiotics. In this study, hydroxyl-propyl-methyl-cellulose (HPMC) and polyvinyl pyrrolidone K30 (PVP K-30) was utilized as a binder, sodium starch glycolate (SSG) was used as a disintegrant material for the tablet formulation. The disintegration test, hardness test, angle of response were performed to examine the characteristics of prepared tablet. Lactobacillus vitality test was applied to analyze the total Lactobacillus viable count. The results demonstrated that the pH dependent matrix tablet was prepared successfully and can thus be industrialized instead of the current methodologies used for preparation of conventional probiotics.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.4
• /
• pp.531-537
• /
• 2009

Lightning has a broad frequency spectrum from DC to a few MHz. Consequently, the high frequency performance of grounding systems for protection against lightning should be evaluated, with the distributed parameter circuit model in a uniform soil being used to simulate grounding impedances. This paper proposes a simulation method which applies the distributed parameter circuit model for the frequency-dependent impedance of vertically driven ground rods by considering multi-layered soil structures where ground rods are buried. The Matlab program was used to calculate the frequency-dependent ground impedances for two ground rods of different lengths. As a result, an increase of the length of ground rod is not always followed by a decrease of grounding impedance, at least at a high frequency. The results obtained using the newly proposed simulation method considering multi-layered soil structures are in good agreement with the measured results.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.2
• /
• pp.184-188
• /
• 2010

A cyanobacteria species, Anabaena sp. PCC 7120, was tested to assess its biotransformation ability on two widely used insecticides, aldrin and chlorpyrifos-methyl, in the culture medium. The blue-green alga metabolized aldrin mainly to dieldrin by an epoxidation reaction with the participation of cytochrome P450-dependent monooxygenase in the cyanobacteria. The blue-green alga also produced chlorpyrifosmethyl oxon as a primary metabolite from chlorpyrifos-methyl via a desulfuration reaction, presumably conducted by cytochrome P450-dependent monooxygenase. Therefore, two insecticides might be possibly dissipated by cytochrome P450-dependent monooxygenases in the blue-green algae in the contaminated environments.

• Advances in nano research
• /
• v.5 no.1
• /
• pp.13-25
• /
• 2017

We examine the total optical dielectric function (TODF) of impurity doped GaAs quantum dot (QD) from the viewpoint of anisotropy, position-dependent effective mass (PDEM) and position dependent dielectric screening function (PDDSF), both in presence and absence of noise. The dopant impurity potential is Gaussian in nature and noise employed is Gaussian white noise that has been applied to the doped system via two different modes; additive and multiplicative. A change from fixed effective mass and fixed dielectric constant to those which depend on the dopant coordinate manifestly affects TODF. Presence of noise and also its mode of application bring about more rich subtlety in the observed TODF profiles. The findings indicate promising scope of harnessing the TODF of doped QD systems through expedient control of site of dopant incorporation and application of noise in desired mode.

• Structural Engineering and Mechanics
• /
• v.58 no.2
• /
• pp.217-230
• /
• 2016

Effects of temperature dependent material properties on mixed mode fracture parameters of functionally graded materials subjected to thermal loading are investigated. A domain form of the $J_k$-integral method including temperature-dependent material properties and its numerical implementation using finite element analysis is presented. Temperature and displacement fields are calculated using finite element analysis and are used to compute mixed mode stress intensity factors using the $J_k$-integral. Numerical results indicate that temperature-dependency of material properties has considerable effect on the mixed-mode stress intensity factors of cracked functionally graded structures.

• Structural Engineering and Mechanics
• /
• v.67 no.4
• /
• pp.337-346
• /
• 2018

The purpose of this study is to investigate thermal post-buckling analysis of a laminated composite beam subjected under uniform temperature rising with temperature dependent physical properties. The beam is pinned at both ends and immovable ends. Under temperature rising, thermal buckling and post-buckling phenomena occurs with immovable ends of the beam. In the nonlinear kinematic model of the post-buckling problem, total Lagrangian approach is used in conjunction with the Timoshenko beam theory. Also, material properties of the laminated composite beam are temperature dependent: that is the coefficients of the governing equations are not constant. In the solution of the nonlinear problem, incremental displacement-based finite element method is used with Newton-Raphson iteration method. The effects of the fibber orientation angles, the stacking sequence of laminates and temperature rising on the post-buckling deflections, configurations and critical buckling temperatures of the composite laminated beam are illustrated and discussed in the numerical results. Also, the differences between temperature dependent and independent physical properties are investigated for post-buckling responses of laminated composite beams.

• Transactions of Materials Processing
• /
• v.15 no.9 s.90
• /
• pp.679-685
• /
• 2006

New method for evaluation of heat transfer coefficient is proposed. In general, many researchers have been studied about inverse problem in order to calculate the heat transfer coefficient on three-dimensional heat conduction problem. But they can get the time-dependent heat transfer coefficient only through inverse problem. In order to acquire temperature-dependent heat transfer coefficient, it requires much time for numerous repetitive calculation and inconvenient manual modification. In order to solve these problems, we are using the SQP(Sequential Quadratic Programming) as an optimization algorithm. When the temperature history is given by experiment, the optimization algorithm can evaluate the temperature-dependent heat transfer coefficient with automatic repetitive calculation until difference between calculated temperature history and experimental ones is minimized. Finally, temperature-dependent heat transfer coefficient evaluated by developed program can used on various heat transfer problem.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.350-353
• /
• 1994

This paper presents a method to calculate the characteristic root areas and loci band of control systems with uncertainties. First, equations of boundary curves of root areas in the case of additive and multiplicative perturbation are derived. Then, an algorithm for the calculation of the array of closed curves is presented. When the upper bound of the absolute values of frequency responses for the uncertain part, is also frequency-dependent, the frequency-dependent, terms are included in the characteristic equation of the nominal system. This lead to the boundary equations of the root, areas for control systems with frequency-dependent uncertainty. Numerical examples of the control systems with multiplicative perturbations including frequency-dependent terms are presented to verify this calculation method. Finally, its applications to the design of robust control systems, e.g., passive adaptive control systems are also discussed.

• Transactions on Control, Automation and Systems Engineering
• /
• v.1 no.2
• /
• pp.128-133
• /
• 1999

This paper presents a new delay-dependent robust stabilization condition for uncertain time-delay systems. An algorithm involving convex optimization is proposed to compute a suboptimal upper bound of the delay such that the system can be stabilized by the controller for all admissible uncertainties. It is illustrated by numerical examples that the proposed delay-dependent controller can be less conservative than previous results. It is also shown that the proposed delay-dependent controller can even capture the delay-independent stability of the system, which is not possible with existing delay-dependent results.