• Korean Journal of Health Education and Promotion
• /
• v.20 no.3
• /
• pp.171-188
• /
• 2003

This study, based on stages of behavioral change, was aimed at suggesting strategies for the adoption of moderate drinking habits for community-based health education designed to help rural people. An interview survey was conducted during the period from March 4 to April 5, 2002 by sampling 467 rural people living in 6 villages covered by a public healthcare clinic. The results of this study can be summarized as follows； 1. The perceived non-moderate drinkers were less prepared for behavioral change. 2. The heavier drinking habits were ‘drinking alone’, ‘meals accompanied by drinking’ and ‘drinking twice or more at a time’. The agricultural off-season and the custom of brewing liquor at home were negative environmental factors for moderate drinking. 3. The predisposing factors affecting moderate drinking were recognition of health, expectation of the drinking effect, etiquette encouraging overdrinking and control of drinking. The reinforcing factors were stress from ordinary life and perception of being loved. The enabling factor was accessibility to the public healthcare clinic. 4. Rural residents are less motivated to participate in health education for moderate drinking. Based on the above findings, health education strategies for each stage can be suggested as follows： 1) Pre-contemplation stage： improvement of perception, motivation, sharing of experiences, and reawakening. 2) Contemplation/preparation stag e： measurement of value, departure from the inertia against a change, formation of a habit, and reinforcement of the behavior. 3) Action/maintenance stage： creation of a social atmosphere, encouragement of participation, change of life style, and improvement of environment.

• International Journal of Ocean System Engineering
• /
• v.1 no.4
• /
• pp.211-221
• /
• 2011

Tugboats are widely used near harbors to assist with various operations such as the berthing and deberthing of very large vessels and the towing of barges. Capsizing accidents involving tugboats occasionally take place when the tugboat makes rapid turns in harsh weather conditions. When there is little evidence suggesting how the accident occurred and when the crew members are missing, it is necessary to predict the time history of the towing vessel’s attitude and trajectory from its departure point to when and where it capsized, depending on various input parameters using a numerical simulation. In this paper, the dynamics of a tugboat and a towed barge in conjunction with the external force and moment were established, and the possible input parameters and operational scenarios which might influence the large roll motion of the tugboat were identified. As a result of analyzing the simulated time history of the excessive roll motion of the tugboat, it was found that roll motion can take place when the tugboat is situated on the crest of a wave and when it is pulled by a towed barge through a towing line. The main cause of the accident would be the parameters that primarily influence such situations. These are the wave parameters, course changing scenario, and the amount of tension.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.707-714
• /
• 2016

Active driving safety systems for vehicle, such as the front collision avoidance, lane departure warning, and lane change assistance, have been popular to be adopted to the compact car. For improving performance and competitive cost, FMCW radar has been researched to adopt a phased array or a multi-beam antenna, and to integrate the front and the side radar. In this paper we propose several efficient methods to implement the signal processing module of FMCW radar system using low cost DSP. The pulse width modulation (PWM) based analog conversion, the approximation of time-eating functions, and the adoption of vector-based computation, etc, are proposed and implemented. The implemented signal processing board shows the real-time performance of 1.4ms pulse repetition interval (PRI) with 1024pt-FFT. In real road we verify the radar performance under real-time constraints of 10Hz update time.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.326-334
• /
• 2010

In this study, we provide a comprehensive review of the CIP(Constrained Interpolation Pro file/Cubic Interpolated Propagation) method with a pressure-based algorithm that is known as a general numerical solver for soled liquid, gas and plasmas. And also we introduce a body-fitted grid system(Soroban grid) for computation of strongly nonlinear marine hydrodynamic problems such as slamming water on deck, wave impact by green water. This grid system can keep the third-order accuracy in time and space with the help of the CIP method. The grid system consists of the straight lines and grid points. In the 2-dimensional grid case, each grid points moving in these lines like abacus - Soroban in Japanese. The length of each line can be different and the number of grid points in each line can be different. Mesh generation and searching of upstream departure point are very simple and possible to mesh-free treatment. To optimize computation of free-surface and multi-fluid flows, We adopt the C-CUP method. In most of the earlier computations, the C-CUP method was used with a staggered-grid approach. Here, because of the mesh free nature of the Soroban grid, we use the C-CUP method with a collocated-grid approach.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.381-382
• /
• 2023

Frequent accidents occur when workers at construction sites leave the safety zone, and particularly in the past 5 years, 9 fatal accidents occurred at the Korea Railroad Corporation due to train accidents on other tracks during track work. With the Severe Accident Punishment Act taking effect in January 2022, it is a priority to secure a safe work environment for workers at industrial (construction) sites. Therefore, there is a need to manage workers' departure from the safety zone (construction zone) and to facilitate communication within the construction zone. In this study, a mobile edge computing CCTV system is proposed that uses geofencing to determine whether workers are working in the danger zone, which can judge and respond in real-time to the ever-changing field environment. The proposed system is mobile and flexible, rather than server-based fixed CCTV. However, since it is designed mainly based on images, it has limitations in recognition rate depending on the environment such as distance, viewing angle, and illumination. As a way to compensate for this, it is required to develop more reliable equipment by combining technologies such as LiDAR and Radar.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.21-32
• /
• 2007

The linear traffic model(Vertical queueing model) that is adopted widely in traffic flow estimation assumes that all vehicles have the identical motion before joining a queue at the stop-line. Thus, a queue is supposed to form vertically not horizontally. Due to the simplicity of this model, the departure time of the leading vehicle is assumed to coincide with the start of effective green time. Thus, the delay estimates given by the Vertical queueing model is not always realistic. This paper explores a microscopic traffic model(a Kinematic Car-following model at Signalised intersections: a KCS traffic model) based on the one dimensional Kinematic equations in physics. A comparative evaluation in delay and sensitivity of delay difference between the KCS traffic model and the previously known Vertical queueing model is presented. The results show that the delay estimate in the Vertical queueing model is always greater than or equal to the KCS traffic model; however, the sensitivity of delay in the KCS traffic model is greater than the Vertical queueing model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.1032-1040
• /
• 2010

This paper describes implementation of electonic seal (E-Seal) of a container based on ISO 18185 standard and development of monitoring systems checking E-Seal device and cargo states in the container for secure transportation from departure to destination. For lack of definition on confidentiality support in ISO 18185-4 standard, it is vulnerable to security attack such as sniffing. To cope with this, we developed encryption/decryption functions implementing RC5 and AES-128 standards and compared their performance. Experimental results showed that RC5 outperformed AES-128 in terms of time delay. In addition, RC5 had an advantage under the condition of large sized messages as well as CPUs with low performance. However, the portion of encryption/decryption processing time was less than 1 percent of response time including communication delay between E-Seal tags and readers. Hence, the performance difference between RC5 and AES-128 standards was trivial, which revealed that both specifications were allowable in developed systems.

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.129-147
• /
• 2002

This paper presents a variational equality formulation by Providing new dynamic route choice condition for a link-based dynamic traffic assignment model. The concepts of used paths, used links, used departure times are employed to derive a new link-based dynamic route choice condition. The route choice condition is formulated as a time-dependent variational equality problem and necessity and sufficiency conditions are provided to prove equivalence of the variational equality model. A solution algorithm is proposed based on physical network approach and diagonalization technique. An asymmetric network computational study shows that ideal dynamic-user optimal route condition is satisfied when the length of each time interval is shortened. The I-394 corridor study shows that more than 93% of computational speed improved compared to conventional variational inequality approach, and furthermore as the larger network size, the more computational performance can be expected. This paper concludes that the variational equality could be a promising approach for real-time application of a dynamic traffic assignment model based on fast computational performance.

• Journal of the Economic Geographical Society of Korea
• /
• v.18 no.4
• /
• pp.539-555
• /
• 2015

This study proposes the methodology for measuring the time-distance accessibility on the Seoul bus system based on the T-card transaction databases and analyzes the results. T-card transaction databases contain the time/space information of each passenger's locations and times of the departure, transfers, and destination. We introduce the bus network graph and develop the algorithms for time-distance accessibility measurement. We account the average speed based on each passenger's get-in and getoff information in the T-card data as well as the average transfer time from the trip chain transactions. Employing the modified Floyd APSP algorithm, the shortest time distance between each pair of bus stops has been accounted. The graph-theoretic nodal accessibility has been given by the sum of the inverse time distance to all other nodes on the network. The results and spatial patterns are analyzed. This study is the first attempt to measure the time-distance accessibility for such a large transport network as the Seoul bus system consists of 34,934 bus stops on the 600 bus routes, and each bus route can have different properties in terms of speed limit, number of lanes, and traffic signal systems, and thus has great significance in the accessibility measurement studies.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.2002-2007
• /
• 2006

The path search method in the telematics system should consider traffic flow of the roads as well as the shortest time because the optimal path with minimized travel time could be continuously changed by the traffic flow. The existing path search methods are not able to cope efficiently with the change of the traffic flow. The search method to use traffic information also needs more computation time than the existing shortest path search. In this paper, a method for efficiency improvement of path search is implemented and its performance is evaluated. The method employs the fixed grid for adjustable heuristic to traffic flow. Moreover, in order to simplify the computation of estimation values, it only adds graded decimal values instead of multiplication operation of floating point numbers with due regard to the gradient between a departure and a destination. The results obtained from the experiments show that it achieves the high accuracy and short execution time as well.