• 구강회복응용과학지
• /
• 제27권4호
• /
• pp.415-422
• /
• 2011

교정 치료에서 치과의사가 아무리 좋은 진료 술식을 가지고 있더라도, 환자의 협조도가 따르지 않는다면 좋은 치료 결과가 나오기를 기대할 수 없다. 본 연구에서는 환자부모의 인성을 연구하여 자녀의 협조도와의 상관관계를 규명고자 하였다. 환자부모의 인성검사는 scl-90-r로 간이 인성검사를 하였고, 환자의 협조도는 약속시간, 장치의장착률, 장치의 파손, 진료비 납부율를 통해 협조도를 구했다. 환자 부모 인성검사 내용은 신체화척도, 강박증, 대인예민성, 우울척도, 불안척도, 적대감, 공포불안척도, 편집증 척도, 정신증 척도, 부가적 문항이었다. 여기서 상호상관관계를 알기위해 원도우 통계처리용 SPSS12.0 프로그램을 사용한 결과는 협조도와 부모인성관계는 상관관계가 없었고, 아버지와 협조도의 관계에서 아버지의 정신 증에서 약간의 상관관계는 있었으나, 무시할 만한 수준이었다. 어머니와 협조도의 상관관계는 거의 나타나지 않았다. 그러나 협조도간의 상관관계에서 약속과 장착, 파손, 납부는 통계적으로 유의할만한 결과가 나왔다. 장착과 납부는 양의 상관관계를 보였다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제30권2호
• /
• pp.143-149
• /
• 2004

Background: Some clinical trials have reported that a new analgesic combination of tramadol and acetaminophen provides good efficacy in various pain models. For the more clinical uses of this agent, comparisons about the onset of analgesia and analgesic efficacy in the acute state of pain with the other drugs known as strong analgesics were needed. Purpose: The goal of this study was to compare the times to onset of analgesia and the other analgesic efficacy of 75 mg tramadol/650 mg acetaminophen and 20 mg codeine/500 mg acetaminophen/400 mg ibuprofen in the treatment of acute pain after oral surgery. Patients and Methods: Using a randomized, single-dose, parallel-group, single-center, and active-controlled test design, this clinical study compared the times to onset of analgesia using a two-stopwatch technique and the other analgesic efficacy of the single-dose tramadol/acetaminophen and codeine/acetaminophen/ibuprofen. These were assessed in 128 healthy subjects with pain from oral surgical procedures involving extraction of one or more impacted third molars requiring bone removal. From the time of pain development, the times to onset of perceptible and meaningful pain relief, pain intensity, pain relief, an overall assessment, and adverse events of the study medications were recorded for 6 hours. Results: The demographic distribution and baseline pain data in the two groups were statistically similar. The median times to onset of perceptible pain relief were 21.0 and 24.4 minutes in the tramadol/acetaminophen and codeine/acetaminophen/ibuprofen groups respectively and those to onset of meaningful pain relief were 56.4 and 57.3 minutes, which were statistically similar. The other efficacy variables such as mean total pain relief (TOTPAR) and the sum of pain intensity differences (SPID) were also similar in the early period after pain development and drug dosing. The safety of tramadol/acetaminophen was well tolerated and very comparable to that of codeine/acetaminophen/ibuprofen. Conclusions: In this acute dental pain model, the onset of analgesia and analgesic efficacy of tramadol/acetaminophen was comparable to that of codeine/acetaminophen/ibuprofen. These results showed that tramadol/acetaminophen was recommendable for fast and effective treatment in the management of postoperative acute pain.

• 대한치과보철학회지
• /
• 제42권4호
• /
• pp.458-470
• /
• 2004

Statement of problem: Br${\aa}$nemark or ITI are two currently most widely used implant systems but with contrasting design, surgical and restoration methods. Purpose: The purpose of this study was to compare changes and its statistical significance in bone height and shape which may rise due to the differences between two implant systems. Also to analyse the effect of inter-implant distance on annual bone height changes. Material & Method: Those patients who were treated with two or more of either Br${\aa}$nemark or ITI implants at posterior mandibular area at Yonsei University Dental Hospital, Implant Clinic were selected. At annual examination appointments, standardised radiographs using parallel technique were taken. Marginal bone and inter-implant crestal bone changes were measured and following results were obtained. Results: 1) When ITI and Br${\aa}$nemark system were compared, both annual marginal and inter-implant crestal bone height changes in ITI system in the first two years were smaller than Br${\aa}$nemark and they were statistically significant. On the third year, however, there was no statistical difference between two implant systems on their annual bone level changes (p>0.05). 2) The Marginal and inter-implant crestal bone changes were compared when inter-implant distance was less than 4mm. Statistically significant bone level changes were noted on the first year only for ITI implants but in the first and second year for Br${\aa}$nemark implants (p>0.05). 3) When comparing angulation changes between marginal bone and implant fixture, ITI system had smaller angulation changes but the annual changes were not statistically significant (p>0.05). Conclusion: Within the limitation of this study, it could be concluded that Br${\aa}$nemark implant systems had more changes in marginal and inter-implant crestal bone level in the first and second year after loading with statistical significance. Further studies are recommended to see the effects of these bone loss during the first and second year after loading on the long term prognosis of Br${\aa}$nemark Implants.

• 구강회복응용과학지
• /
• 제25권4호
• /
• pp.329-336
• /
• 2009

선천적 기형이나 후천적인 외상 또는 신생물에 의해 상악골 절제술을 받은 경우, 상악에서 발생하는 구강내 결손은 흔히 비강과 상악동 및 구강이 연결된 형태로 나타난다. 이러한 상악골의 결손은 구강과 비강이 교통되어 발음, 저작, 연하 등의 기능에 이상을 초래하게 된다. 이러한 경우에도 보철치료의 기본적인 목표가 적용되며, 후천적 상악 결손부에 수복되는 폐색장치는 발음, 연하, 저작 기능을 회복할 수 있어야 하고, 적절한 심미적 만족을 제공해야 하며, 환자가 편안하게 사용할 수 있어야 한다. 상악 폐색장치의 무게를 감소시키는 것은 잔존 조직의 건강과 정상적인 기능 및 환자의 안락함을 개선시킬 수 있다. 개방형 폐색장치는 결손부의 크기에 따라 6.55~33.06% 까지 무게를 줄여줌으로써 환자에게 편안함과 편의성을 제공해 주며, 생리적 기능을 향상시켜 치아와 지지 조직에 불필요하게 가해지는 부하를 감소시켜 준다. 본 증례는 hemi-maxillectomy를 시행한 환자에서 이중온성법을 이용하여 기존의 방법보다 더 균일한 의치상 두께를 가진 폐색장치를 제작하여 환자의 기능적, 심미적인 만족을 얻었기에 이를 보고하는 바이다.

• 구강회복응용과학지
• /
• 제26권4호
• /
• pp.433-445
• /
• 2010

본 연구에서는 주모형으로부터 인상체를 제거한 후 인상용 코핑이 인상체 내에 남아있는 개방형 트레이 인상법의 이용 시, 인상용 코핑의 연결고정에 따른 효과와 인상 채득 시 사용될 수 있는 수종의 트레이가 주모형의 정확성에 미치는 영향에 대해 비교 연구해 보고자 하였다. 자가중합형 트레이 레진으로 제작한 개인 트레이, 플라스틱 금속 복합 트레이 그리고 폴리카보네이트 기성 트레이 등의 3종류의 트레이가 사용되었고, 각 트레이 마다 인상용 코핑의 연결고정 여부에 따라 두 개의 군으로 나누었다. 이렇게 나누어진 총 6개의 군에서 각 실험군당 10개의 시편을 제작하였다. 임플랜트 유사체와 지대주 사이에 발생한 수직오차의 측정에는 1-screw test법을 이용하였다. 1시편 당 총 6부위를 측정하였고, 3회씩 측정하여 동일한 수치를 나타낼 경우에 기록하여 통계 처리하였다. 인상용 코핑의 연결고정 여부와 상관없이 개인 트레이군, 플라스틱 금속 복합 트레이군 그리고 폴리카보네이트 기성 트레이군 사이에 유의한 차이는 나타나지 않았다. 하지만 개인 트레이, 플라스틱 금속 복합 트레이 그리고 폴리카보네이트 기성 트레이를 이용하여 인상 채득한 경우 패턴 레진으로 연결고정한 군이 비연결고정 군보다 더 정확한 결과를 보여주었다 (p<0.05).

• 한국산학기술학회논문지
• /
• 제18권10호
• /
• pp.448-453
• /
• 2017

본 연구는 CAD/CAM 시스템을 활용하여 제작방식 및 재료에 따른 Coping crown의 변연 적합도를 비교하여 최적의 제작방식 및 재료를 비교하고자 하였다. 제작방식 및 재료에 따른 코핑 크라운을 제작하였고, 리플리카 테크닉을 사용하여 변연적합도 측정을 실시하였다. 제작법과 재료에 따른 비교분석을 위해 이원배치분산 분석을 실시하였으며 서로 다른 평균값들의 비교 분석을 위해서 일원배치분산분석을 실시하였다. 연구결과 합금을 Milling법으로 제작한 MM군은 114.6, MS군은 111.4 값을 나타냈고, Milling/Sintering 법으로 제작한 MSC군은 67.2, MSS군은 50.9값을 나타냈고, Printing 법으로 제작한 SLME군은 100.5, SLMR군은 113.2값을 나타냈고, 세라믹의 Milling/Sintering 법으로 제작한 MSZ군은 35.6, MSC군은 36.3값을 나타냈고, 제작방식과 재료에 따른 이원배치분산분석 결과는 제작방식에에 따른 유의한 차이는 보이지 않았으나, 재료에 따른 유의한 차이는 나타내었다. 가장 높은 변연적합도를 보인 군은 세라믹 재료의 Milling/sintering 법이 가장 낮은 값을 보이며 최적의 방법으로 검증이 되었다. 그러나 CAD/CAM 시스템을 활용하여 제작된 Coping crown의 변연 적합도는 임상에서 허용이 가능한 수치값에 해당하므로 임상에 적용이 가능한 것으로 나타났다.

• 한국산학기술학회논문지
• /
• 제21권3호
• /
• pp.335-341
• /
• 2020

본 연구의 목적은 shear bond strength을 이용하여 pressed lithium disilicate 전장도재와 zirconia core의 접착을 비교 분석하는 것이다. Zirconia blank(Zirtooth, HASS, Gangneung, Korea)에 각 pressed ceramic(IPS e.max Zirpress, Vita PM9, GC Initial IQ, HASS Rosetta UP)이 적용된 시편을 제작하였다(N=40). 전단결합강도를 비교 평가하기 위해 The Schmitz-Schulmeyer test method을 이용하였고 산출된 파괴하중의 값을 분석했다. 산출된 네 가지 전단결합강도 값들 간의 평균 비교는 일원분산분석(one-way ANOVA)을 통해 이루어졌고, Tukey의 사후검정을 실시하여 서로 간의 평균 차이가 통계적으로 유의함을 검증하였다. 또 파절면의 3D 분석을 통하여 파괴 표면을 관찰하여, 그 파괴 양상도 분류하였다. 실험군별 전단결합강도는 IPS e.max Zirpress 16.69±3.11MPa, VITA PM9 14.21±3.63MPa, GC Initial IQ 11.17±2.92MPa, HASS Rosetta SM 27.90±5.71MPa이었으며, Lithium disilicate ceramic veneer(HASS Rosetta SM)의 결합 강도는 다른 제품들보다 통계적으로 유의하게 높았다(p<0.05). 또, 파괴면의 유형 분류 결과, 모든 시편에서 cohesive 파괴는 관찰되지 않았고 주로 adhesive와 cohesive가 같이 조합된 파괴 유형이 관찰되었다. 본 연구 결과에 의해서 pressed lithium disilicate 전장도재가 기존의 pressed to zirconia system보다 나은 접착력을 보여주었다.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 춘계학술대회
• /
• pp.235-237
• /
• 2001

;Dentistry has benefited from tremendous advances in technology with the introduction of new techniques and materials, and patients are aware that esthetic approaches in dentistry can change one's appearance. Increasingly. tooth-colored restorative materials have been used for restoration of posterior teeth. Tooth-colored restoration for posterior teeth can be divided into three categories: 1) the direct techniques that can be made in a single appointment and are an intraoral procedure utilizing composites: 2) the semidirect techniques that require both an intraoral and an extraoral procedure and are luted chairside utilizing composites: and 3) the indirect techniques that require several appointments and the expertise of a dental technician working with either composites or ceramics. But, resin restoration has inherent drawbacks of microleakage. polymerization shrinkage, thermal cycling problems. and wear in stress-bearing areas. On the other hand, Ceramic restorations have many advantages over resin restorations. Ceramic inlays are reported to have less leakage than resin restoration and to fit better. although marginal fidelity depends on technique and is laboratory dependent. Adhesion of luting resin is more reliable and durable to etched ceramic material than to treated resin composite. In view of color matching, periodontal health. resistance to abrasion, ceramic restoration is superior to resin restorationl. Materials which have been used for the fabrication of ceramic restorations are various. Conventional powder slurry ceramics are also available. Castable ceramics are produced by centrifugal casting of heat-treated glass ceramics. and machinable ceramics are feldspathic porcelains or cast glass ceramics which are milled using a CAD/CAM apparatus to produce inlays (for example, Cered. They may also be copy milled using the Celay apparatus. Pressable ceramics are produced from feldspathic porcelain which is supplied in ingot form and heated and moulded under pressure to produce a restoration. Infiltrated ceramics are another class of material which are available for use as ceramic inlays. An example is $In-Ceram^{\circledR}$(Vident. California, USA) which consists of a porous aluminum oxide or spinell core infiltrated with glass and subsequently veneered with feldspathic porcelain. In the 1980s. the development of compatible refractory materials made fabrication easier. and the development of adhesive resin cements greatly improved clinical success rates. This case report presents esthetic ceramic inlays for posterior teeth.teeth.

• Imaging Science in Dentistry
• /
• 제38권3호
• /
• pp.169-176
• /
• 2008

Purpose : To assess the diagnostic accuracy and value in an imaging technique field through the comparison of cone beam computed tomography and conventional panoramic radiography in assessing the topographic relationship between the mandibular canal and impacted third molars. Materials and Methods : Participants consisted of 100 patients offered the images through cone beam computed tomography and panoramic radiography. PSR-$9000^{TM}$ Dental CT system (Asahi Roentgen Ind. Co., Ltd, Japan) was used as the unit of cone beam computed tomography. CE-II (Asahi Roentgen Ind. Co., Ltd, Japan) and Pro Max (Planmeca Oy, Finland) were used as the unit of panoramic radiography. The images obtained through panoramic radiography were classified into 3 types according to the distance between mandibular canal and root of mandibular third molar. And they were classified into 4 types according to the proximity of radiographic feature. The images obtained through cone beam computed tomography based on the classification above were classified into 4 types according to the location between the mandibular canal and the root and were analyzed. And they were classified into buccal, inferior, lingual, and between roots, according to the location between mandibular canal and root. The data were statistically analyzed and estimated by $X^2$-test. Results : 1. There was no statistical significance according to 3 types (type I, type II, type III) through CBCT. 2. The results of 4 types (type A, type B, type C, type D) through CBCT were as high prevalence of CBCT 1 in type A, CBCT 2 in type B, CBCT 3 in type C, and CBCT1 in type D and those of which showed statistical significance (P value=0.03). 3. The results according to location between mandibular canal and root through CBCT recorded each 49, 25, 17, 9 as buccal, inferior, lingual, between roots. Conclusion : When estimating the mandibular canal and the roots through the panoramic radiography, it could be difficult to drive the views of which this estimation was considerable. Thus it is required to have an accurate diagnostic approaching through CBCT that could estimate the location between mandibular canal and roots.

• Journal of Periodontal and Implant Science
• /
• 제31권4호
• /
• pp.749-763
• /
• 2001

Osseointegrated titanium implants have become an integral therapy for the replacement of teeth lost. For dental implant materials, titanium, hydroxyapatite and alumina oxide have been used, which of them, titanium implants are in wide use today. Titanium is known for its high corrosion resistance and biocompatability, because of the high stability of oxide layer mainly consists of $TiO_2$. With the development of peri-implantitis, the implant surface is changed in surface topography and element composition. None of the treatments for cleaning and detoxification of implant surface is efficient to remove surface contamination from contaminated titanium implants to such extent that the original surface elemental composition. In this sights, the purpose of this study was to evaluate rough surface titanium implants by means of scanning electron microscopy(SEM) and X-ray photoelectron spectroscopy(XPS) with respect to surface appearance and surface elemental composition. Moreover, it was also the aim to get the base for treatments of peri-implantitis. For the SEM and XPS study, rough surface titanium models were fabricated for control group. Six experimental groups were evaluated: 1) long-time room exposure, 2 ) air-powder abrasive cleaning for 1min, 3) burnishing in citric acid(pH1) for 1min, 4) burnishing in citric acid for 3min, 5) burnishing in tetracycline for 1min, 6) burnishing in tetracycline for 3min. All experimental treatments were followed by 1min of rinsing with distilled water. The results were as follows: 1. SEM observations of all experimental groups showed that any changes in surface topography were not detected when compared with control group. (750 X magnification) 2. XPS analysis showed that in all experimental groups, titanium and oxygen were increased and carbon was decreased, when compared with control group. 3. XPS analysis showed that the level of titanium, oxygen and carbon in the experimental group 3(citric acid treatment for 1min, followed by 1min of distilled water irrigation) reached to the level of control group. 4. XPS analysis showed that significant differences were not detected between the experimental group 1 and the other experimental groups except of experimental group 3. The Ti. level of experimental group 2, airpowder abrasive treatment for lmin followed by 1min of saline irrigation, was lower than the Ti. level of tetracycline treated groups, experimental group 5 and 6. From the result of this study, it may be concluded that the 1min of citric acid treatment followed by same time of rinsing with distilled water gave the best results from elemental points of view, and can be used safely to treat peri-implantitis.