• 대한치과교정학회지
• /
• 제22권3호
• /
• pp.675-690
• /
• 1992

The purpose of this study was to obtain the lingual morphology (size, angulation, contour, eminence) of adults with normal occlusion in order to provide the basic data for lingual bracket and lingual arch form in Korean. The subjects (Male: 50, Female: 50) were selected who have normal occlusion and dental casts were prepared. Tooth size, angulation, arch width, horizontal contour, lingual eminence were measured for all 28 teeth both upper and lower arch. The results were as follows: 1. Measuring items of all individual teeth for adults with normal occlusion were obtained. 2. In comparison tests, there was a statistically difference between intermolar widths $(\underline{6}\;to\;\underline{6})$ before occlusal reduction and intermolar width $(\underline{6}\;to\;\underline{6},\underline{7}\;to\;\underline{7})$ after occlusal reduction only all the other measuring items showed no statistically differences. 3. There was small variation in horizontal contour of lingual surface on lower incisors and upper and lower bicuspids. The other teeth showed somewhat greater variations. 4. There was offset between canine and bicuspid in upper arch while there was no prominent offset in lower arch.

• 대한치과보철학회지
• /
• 제14권1호
• /
• pp.17-21
• /
• 1976

The author studied the gingival responses to some dental cements in the gingival sulcus around artificial crowns. Abutment preparation for full veneer crown was performed in the canines of the two dogs. The location of cervical margins was about 0.5mm. below the gingival crest. Niranium metal crowns were constructed for the teeth, and cemented with zinc phosphate cement or polycarboxy late cement. In the experimental groups the retained cements in the gingival sulucus were not removed, and in the control groups the cements were removed completely after cementation. The dogs were sacrificed at 3 weeks and 5 weeks respectively after cementation. The gingival responses to these cements were examined histologically. The findings were as follows. 1. There was severe inflammation in the gingiva where the cements had been retained in the gingival sulcus around artificial crowns. 2. There was more severe inflammation in the gingiva which had contacted with zinc phosphate cement than in the gingiva with polycarboxylate cement. 3. There was mild inflammation in the gingiva around the margins of Niranium crowns. 4. The retained cement around the margin of restoration should be completely removed after cementation.

• 치과방사선
• /
• 제3권1호
• /
• pp.7-18
• /
• 1973

The authors have taken the x-ray films of carpal bone and orthopantomographs in Korean children to research the degree of ossification of carpal bone, that of calcification of tooth in jaw bone, the eruption rate of tooth, and the completion rate of apical foramen, and have compared the bone age and tooth age. We have gained a series of intersting conclusions to dare to report. 1. The ossification of carpal bone and the growth of tooth had processed proportionally to each other. 2. Both the bone age and tooth age were earlier in the female than in the male. 3. The completion of tooth crown formation and that of tooth root formation had processed proportionally to each other, and the general tendency of process was the earliest in the mandibular first molar and the latest in the second molar. 4. The eruption of tooth was the earliest in the mandibular first molar. The other teeth had erupted in the following orders: the central incisor, the lateral incisor, the first premolar, the second premolar, the canine and the second molar.

• 대한치과보철학회지
• /
• 제40권5호
• /
• pp.429-440
• /
• 2002

Current dental restorations present a relatively weak resistance to fracture. Owing to their unique mechanical properties, fibre-reinforced polymers are now being considered. Unidirectional or woven continuous fibres, made of glass, polyethylene, carbon or Kevlar, have been evaluated. This study focused on the use of glass fibre knitted fabrics to reinforce acrylate resins, in order to investigate the possibility to construct single crowns as well as three unit bridges. Some points affecting the final composite system were tested ; 1) static strength, with focus on the stress transfer under a occlusal contact point ; 2) modelling of a three nit bridge ; 3) fatigue strength as a posterior three unit bridge material. The study demonstrated that knitted fabric reinforcements are showing an interesting compromise between stiffness, static strength for single crown. For three unit bridge applications in the posterior arch, however knitted glass fabric reinforcements were not strong enough in fatigue An additional reinforcement in the posterior arch fixed partial denture design was recommended.

• 구강회복응용과학지
• /
• 제20권1호
• /
• pp.1-8
• /
• 2004

STATEMENT OF PROBLEM: Tensile strength of metal crown cemented with provisional cement have shown clinically difference between metal abutment of implant and natural abutment. PURPOSE: This study was tested to compare the tensile strength of provisional cement on the natural abutment and metal abutment. MATERIAL AND METHODS: Out of the 20 premolars that were selected for this experiment, each 10 were prepared of abutments by chamfer and rounded shoulder margin and then duplicated to produce 20 metal abutments that were same to natural teeth. Then, crowns were fabricated to fit the total 40 natural & metal abutments to be cemented by cavitec, to be added of regular, repetitive vertical load, and to be measured of tensile strength by using Universal Test Machine. RESULTS: There was statistically significant difference in the tensile strength between the crowns cemented to the natural & metal abutments, but no statistically significant difference was observed between the chamfer and the shoulder gingival margin of the each abutments. CONCLUSIONS: Tensile strength of metal teeth is greater about 2 more times than that of natural teeth when it is cemented with Cavitec.

• 대한치과교정학회지
• /
• 제4권1호
• /
• pp.57-61
• /
• 1974

The patient, a girl of 19 years in good health, had a class I malocclusion. The maxillary left centra1 incisors and both lateral incisors had already erupted. But the space for the right central incisor was partially closed by the mesial drifting of the neighboring teeth. The caused a shift in the midline and a cross-bite relation on the incisors. X-ray examination revealed the presence of the right central incisor in the alveolar bone and odontoma just above the crown of the right central incisor. After enough space for the impacted incisor was created in the dental arch with a open-coil spring the rectangular incision was made. Removing the odontoma uncovered the flat surface of the labial aspect of the incisor. During the tooth had erupted of its own accord, any unnecessary force had been imposed on the tooth. When it was decided that the tooth should be brought out by the mechanical device, the gold cast onlay with hook was used and run a light elastic between this hook and the main arch wire. Finally the tooth was brought down to the arch level. The result was excellent. Fortunately the esthetic problem and any detrimental effects on the psychological make-up could be avoided.

• 한국결정성장학회지
• /
• 제13권3호
• /
• pp.99-104
• /
• 2003

용융침투법으로 알루미나/지르코니아-유리 복합체를 제조하여 지르코니아 첨가가 복합체의 기계적 및 광학적 특성과 유리 침투 kinetic에 미치는 영향을 조사하였다. 유리 침투시간이 증가할수록 침투깊이는 Washburn식에 의한 포물선관계로 증가하였으며 침투 상수인 K는 기공 크기의 함수로 지르코니아 첨가량이 증가할수록 기공 크기의 감소로 감소하였다. 지르코니아 양이 증가함에 따라 명도($L^*$)는 증가하지만 유리 침투 상수(K), 투과율(transmittance), 채도($C^*$)가 감소하였다. 지르코니아가 15 wt% 첨가될 때까지 알루미나/지르코니아-유리 복합체의 인성값 증가를 보였지만 기공률의 증가로 인하여 기계적 특성 향상에는 크게 기여하지 않았다.

• 구강회복응용과학지
• /
• 제19권4호
• /
• pp.317-323
• /
• 2003

When making crown and bridges on anterior regions, many practitioners consider the esthetics the most. For this reason functional aspect are not considered as much as the esthetics. If the occlusion on the anterior region are not formed correctly, movement of the temporomandibular joint can be disturbed and excessive stress can be occur that pathologic condition can be under lied. On this case presentation will show the importance of the anterior guidance and suggest the appropriate protocol of using customized anterior guide table. A 45years old male had to remake both of the upper central and lateral PFM because of the porcelain fracture. The new PFM crowns were made conventional methods without considering the anterior guidance. After the temporary setting, the patient complained of discomfort and short looking upper anteriors. To solve these problems we had to restore the palatal contour and length of the new crowns by making customized anterior guide table using temporary crowns that contains patient's old anterior guidance. This procedure which is copying the pt's comfortable anterior guidance to the final prosthesis made them to be esthetic and patients to feel comfortable.

• 대한소아치과학회지
• /
• 제28권1호
• /
• pp.12-15
• /
• 2001

치아만곡은 조직-형태분화기에 나타나는 치아형태의 이상으로 석회화된 부위와 미석회화된 부위간의 장애로 인해서 치관 및 치근 모두에서 발생하는 기형이며, 상악 절치에서 호발하며 매복 가능성이 높다고 보고되었다. 만곡의 원인으로는 유치의 외상 치배의 이소성 발육, 낭종이 있으며 그외에 otodental syndrome, Hurler syndrome, 쇄골두개이골증에서 보고되었다. 본 증례는 치아우식증으로 인해서 발생된 치근단병소가 치아만곡을 유발할 수 있는 원인이 될 수 있다고 생각하였기에 이에 보고하는 바이다.

• 대한심미치과학회지
• /
• 제24권1호
• /
• pp.25-38
• /
• 2015

치과계에서 캐드캠이 보급되면서 본격적으로 사용한 지 15년이 넘었다. 코핑 정도의 역할에서 구치부 전부관으로 확대되었고, 최근에는 전치부에서도 많이 사용하는 추세이다. 장비의 발전도 비약적이었지만 지르코니아 블록의 발전이 가장 많이 이루어졌다. 개개인의 능력이나 경험 차에 의해 차이는 있을 수 있겠지만, 도재를 올리지 않고 지르코니아에 컬러링만으로도 얼마든지 색을 표현 할 수 있다. 또한 캐드 디자인 만으로도 표면의 질감을 표현하는 것에 우리가 알고 있는 만큼 가능하다. 본 논문에서는 이러한 디지털 치과학의 변천과정을 정리해 보고자 한다.