• 대한치과기공학회지
• /
• 제7권1호
• /
• pp.41-51
• /
• 1985

This study has been to survey the present situation of satisfaction to the occupation and dental laboratory by means of selscting 200 dental technicians who are woked in Pusan, Deagu, Kwangju, Deajun. Questionaires were distributed to them and the summerized results were as follows; 1. In general, the dental technician's satisfaction of the occpation was revealed as moderate(Mn, 2.83), the dental technician's satisfaction of the laboratory was revealas moderate(Mn, 2.80). The highest degree item out of the satisfaction of occpation was the outlook(Mn, 3.23), and the lowest degree item was the advancement and the rise to a high position(Mn, 2.22). The highest degree item out of the satisfaction of laboratory was dental material(Mn, 3.07), and the lowest degree item was the equipment of dust collection(Mn, 2.49) 2. By age, the highest degree item out of the satisfaction of occpation was 30 to 43 group(Mn, 3.28), 50 and over group was the lowest degree item(Mn, 2.89). The highest degree item out of the satisfaction of laboratory was 40 to 50 group(Mn, 3.10), the lowest degree item was 35 to 39 group(Mn, 2.88). 3. By school career, the satisfaction of occpation and dental laboratory were higher in the graduated college group than the graduated highschool group. 4. By personal health state, the highest degree item of the satisfaction of occpation was the health group(Mn, 3.25). The highest degree item of the satisfaction of laboratory was the unhealthy group(Mn, 3.07). 5. By religion, the satisfaction if iccupation of laboratory ws higher in the religious group than the non-religious group. 6. By job career, the highest degree item of occupation satisfaction was 15 to 20 years group(Mn, 3.27), the lowest degree item was 20 and over group(Mn, 3.02). The highest degree item out of the satisfaction of laboratory was 15 to 20 years group(Mn, 3.05), The lowest degree item was 7 to 10 years group (Mn, 2.90). 7. By job position, the highest degree item out of satisfaction of occupation was the chief of laboratory group(Mn, 3.33), the head of laboratory group was the lowest degree item(Mn, 3.07). The hightest degree item out of the satisfaction of laboratory was the head of laboratory group(Mn, 3.10), the lowest degree item was the chief of laboratory group(Mn, 2.88). 8. By the place of employment, the degree of occpational satisfaction by items was found that the highest degree in the group engagel in general hospital(Mm, 3.43), the group engaged in dental clinic and hospital(Mn. 3.24), and the dental laboratory group(Mn. 3.14) in order. The difference among the group was significant emough(P<0.05). The highest degree item out of the satisfaction of laboratory was dental laboratory group(Mn. 2.70). The difference among the group was significant emough(P<0.01). 9. By monthly salary, the highest degree item out of the satisfaction of occupation was ￦500,000 to 600,000 group(Mn. 3.32), the lowest degree item was ￦600,000 and over group(Mn, 3.07). The highest degree item out of the laboratory satisfaction was ￦100,000 to 200,000 group(Mn, 3.03), the lowest degree group was ￦300,000 to 400,000 group(Mn, 2.95). 10. As compared with the degree of satisfaction according to job satisfaction, the highest degree item out of the occupational satisfaction was much satisfied group(Mn, 3.65), the lowest degree item was non-satisfied group(Mn, 2.68). The difference among the group was significant enough(P<0.05). The highest degree item out of the satisfaction of laboratory was non-satisfied group(Mn, 30.9), the lowest degree item was satisfied group(Mn, 2.84). The difference among the group was significant enough(P<0.01).

• 대한치과기공학회지
• /
• 제38권4호
• /
• pp.327-342
• /
• 2016

Purpose: The purpose of this study was to investigate the cognition of denture fabrication activities and its cost in National Health Insurance for elderly denture. Methods: A self-administered questionnaire was completed by 41 dental laboratories' owner who was research subjects of HIRA(Health Insurance Review & Assessment Service)'s policy research for elderly denture in 2011. The questionnaire consisted of general characteristics of the subjects, dental technicians' knowledge of national health insurance coverage of elderly denture, job-related changes after national health insurance coverage of elderly denture including validity of denture fabrication activity classification and the cost for each service. Each question was measured by Likert 5 point scale or frequency. The collected data were analyzed by SPSS 16.0. Results: Most of the research subjects had been fabricating national health insurance coverage denture(92.7%), also had ample knowledge of national health insurance coverage denture for elderly. Job-related changes after national health insurance coverage of elderly denture revealed marginal differences in the quality. The validity of fabrication activity classification of resin based complete denture was $3.71{\pm}1.023$ by Likert 5 point scale. Conclusion: The goal of national health insurance for elderly denture is to promote elderly's health and well-being. To fabricate denture is a very important part of the denture treatment. For this reason, denture fabrication activity classification and the cost analysis plan should be duly reflected in the policy of national health insurance for elderly denture.

• 한국융합학회논문지
• /
• 제3권3호
• /
• pp.13-19
• /
• 2012

대학생의 진로결정과정에 관한 관심이 증가하면서 진로발달에 대한 이론적 연구와 진로선택에 영향을 미치는 변인들을 규명하려는 연구 그리고 진로결정을 촉진시키기 위한 상담프로그램의 효과 등에 관한 연구들이 활발하게 진행되어 왔다. 이에 진로결정의 문제를 지닌 대학생들을 도와주기 위한 방안으로 먼저 치기공(학)과의 의사결정 유형과 진로결정 수준을 분석하고, 진로결정 상담시에 도움을 얻고자 이 연구를 수행하였다.

• 대한치과기공학회지
• /
• 제37권3호
• /
• pp.157-167
• /
• 2015

Purpose: This study studied and investigated the oral health behavior of students in the Department of Dental Technology at D College at D City. Methods: A self-administrated survey was conducted by students currently enrolled at the Department of Dental Laboratory Technology at D College (June 4, 2015 ~ June 12, 2015), and 320 copies that were available for statistical processing were statistically analyzed by using the SPSS 19.0 Program. Results: Among the survey respondents, 91.6% had experience of dental treatment. The highest response regarding the frequency of tooth brushing appeared to be 'twice' with 44.7%. The responses regarding the time of tooth brushing appeared to be highest for 'before sleeping' with 65.3%, which was followed by 'after breakfast' with 60.6%. To the question asking which areas are brushed during tooth brushing, the response of 'teeth, gum, and tongue' appeared to be highest with 44.4%. Among the respondents, 64.7% experienced scaling, however, the experience rate for scaling appeared to increase in proportion with the increase of class year (p< .001). Regarding the subjective feel for the importance of oral health and necessity of tooth brushing, the scores appeared to be both 4.56. However, the score appeared to be 3.27 regarding one's subjective perception of one's own oral health condition. Regarding one's subjective oral health knowledge level depending on gender, female students showed a meaningfully lower rate (3.12 points) compared to male students (3.29 points) (p< .05), and depending on class, the knowledge level appeared to be meaningfully higher along with the increase in class year (p< .001). The experience of receiving oral health education appeared to be 78.4%, and 88.8% of the respondents responded that there is need for oral health education, however, the intent to participate in an oral health education program appeared to be 56.6%. Conclusion: As a result of the study, it could be concluded that oral health management behaviors and awareness of the students at the Department of Dental Technology at D University to prevent oral diseases were rather poor.

• 대한치과기공학회지
• /
• 제26권1호
• /
• pp.49-58
• /
• 2004

Two diketones, 1-phenyl-1,2-propanedione(PD) and 2,3-butanedione (BD) were investigated as new visible light photosensitizers for a dental resin composite of bis-GMA in order to improve photopolymerization effect. And the photopolymerization efficiency of mixed photosensitizers, PD-CQ and DA-CQ, was studied. Photopolymerization effect of photosensitizers were compared with that of camphorquinone(CQ), the most widely used photosensitizer. The photopolymerization efficiency of bis-GMA containing the photosensitizer increased with irradiation time. The increase was in the order: BD < CQ < PD. The photopolymerization efficiency of this mixture was not so efficient as CQ or PD.

• 대한치과기공학회지
• /
• 제19권1호
• /
• pp.13-19
• /
• 1997

The purpose of this study was carried out by oberserving to composition of an oxide on the surface of Dental porcelain alloy according to the conditions of its heat treatment and analysing the change composition on its surface. Morphological change of the heat treated dental porcelain alloy have been investigated with SEM and EDX. The result of this study is summarized ad follows. The surface indium concentration of specimens increased as the heat treatment temperature and the oxygen partial pressure increased.

• 대한치과기공학회지
• /
• 제31권4호
• /
• pp.67-84
• /
• 2009

The purpose of this study was to furnish data for a new curriculum of the "Bachelor's Degree Course at Junior College" in Korea. Domestic three colleges and one university were selected for comparative analysis about curriculum of the dental laboratory technology. Moreover, three colleges and three universities were selected in Australia, Canada, and USA which are preferred highly on overseas employment by the korea students of dental laboratory technology. From the six colleges and four universities, number of subjects and credit hours on special study were acquired and compared. Between domestics, an agreement on special study were compared. Transferable subjects from korea to foreign were acquired. From the number of subjects and credit hours on special study comparing, following results were obtained. The results were as follows; 1. The ratio of the number of subjects and credit hours on special study were averagely 78.2% and 83.7% in domestic college, 70.8% and 69.7% in domestic university. 2. The ratio of the number of subjects and credit hours on special study in Canada was similar to domestic but those in Australia and USA were less than domestic. 3. Between domestics, an agreement of subjects and credit hours on special study were 81.2% and 84.2% in Catholic University of Busan, 72.2% and 76.4% in Daejeon Health Science College, 71.2% and 72.8% in Gwangju Health College University, 65.1% and 65.9% in Shin Heung College University respectively. 4. Transferable subjects from Korea to Australia or Canada was more than USA. Those to Australia was similar to Canada. These results suggest that the degree of special study in domestic is more than foreign, transferable subjects from Korea to Canada should be profitable and those data is furnish for a new curriculum of the "Bachelor's Degree Course at Junior College" in Korea.

• 대한치과기공학회지
• /
• 제42권3호
• /
• pp.272-280
• /
• 2020

Purpose: This study aimed to determine dental technicians' job satisfaction levels and to assess its influence on turnover intention. Methods: We included 230 dental technicians who work within Seoul, Incheon, Daejeon, the Gyeonggi Province, and the Chungcheongnam-do Province. We carried out a self-reported survey using a structured questionnaire. Results: As a result of assessing the research subjects' job satisfaction level, we found that there was a significant difference in working hours and a dental-work continuing plan sphere (p<0.05). Achievement & self-realization factors, the human relation factor, and growth & development factors were reported to be major job satisfaction indices. The whole average of the job satisfaction level came to 3.11, thereby appearing to be relatively high. In analyzing the research subjects' turnover intention, there was a significant difference in age, task field, dental-work career, working hours, incumbency, and dental-work continuing plan sphere (p<0.05). The question average for turnover intention was 2.88. As a result of assessing a correlation between job satisfaction and turnover intention, a significant negative (-) correlation was found between job satisfaction and turnover intention. Thus, a higher job satisfaction level was observed to lead to a lower turnover intention. Conclusion: As a result of conducting a regression analysis in order to assess the influence of job satisfaction on a turnover intention, a working condition factor, a human relation factor, and a recognition factor each appeared to have a high impact.

• 대한치과기공학회지
• /
• 제39권4호
• /
• pp.275-284
• /
• 2017

Purpose: This study aimed to identify the effects of clinical practice stress on clinical practice satisfaction and to provide basic data for clinical practice improvement strategies. Methods: 150 students who had clinical experiences in Daegu Health College from June 12 to August 11, 2017 were selected by convenience sampling method and analyzed 130 questionnaires excluding 20 incomplete questionnaires. Statistical analysis was conducted using SPSS (Statistical Package for Social Science) 22.0 for windows Results: The satisfaction on major and the type of residentice showed statistically significant effect on the clinical practice satisfaction. The training environment in practice and the interpersonal relationship conflicts mostly effect on clinical practice satisfaction. Conclusion : In order to increase the clinical practice satisfaction, it is necessary to consider ways to improve the practical training environment and reduce interpersonal conflicts.

• 대한치과기공학회지
• /
• 제39권4호
• /
• pp.227-233
• /
• 2017

Purpose: The purpose of this study was to evaluate the validity of digital models fabricated by difference optical source of non-contact 3D dental scanner. Methods: A master model with the prepared upper full arch tooth was used. Stone model(N=10) were produced from master model, and on the other hands, digital models were made with the 3D dental scanner(Blue, white, red optical source). The linear distance between the reference points were measured and analyzed on the Delcam $Copycad^{(R)}$ graphic software. The results were statistically analyzed using the one-way ANOVA and Tukey's HSD test(${\alpha}=0.05$). Results: There were considerable differences in mean values between optical source within each color(blue, white, red), and this difference was not statistically significant(p>0.05). Conclusion : Three different color of dental scanner optical source showed clinically acceptable accuracies of full arch digital model produced by them. Besides, these results will have to be confirmed in further clinical studies.