• Journal of Society of Preventive Korean Medicine
• /
• v.7 no.1
• /
• pp.55-66
• /
• 2003

Osteoporosis is characterized by bone loss and mobidity with osteoporotic fracture. This study was performed to evaluate the effect of on the bone mass and its related factors in estrogen-deficient animal model. The model rats of osteoporsis showed a significant decrease in bone density, bone ash density, calcium content of femur bone. At the 14th day after ovariectomy-surgery, rats were administered with DBE, extract of Dioscorea batatas, per orally, and continued for 10 weeks. And osteoporosis related parameters were determined to investigate the effect of DBE. Osteoporetic rats showed lower serum estrogen level, higher body weight than normal rats, and showed atrophy of uterine horns. DBE showed inhibitory effect on bone loss in osteoporetic condition, and reduced the increase of ALP activity and osteocalcin level in serum, and reduced the increase of OH-proline level in urine. But, DBE had no effect on cell proliferation and ALP activity in rat calvarial cell culture.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.303-306
• /
• 1999

On the effect of substrate bias at first stage of diamond synthesis at lower substrate temperature(approximately 673K) using microwave plasma CVD and effect of reaction gas system for the bias enhanced nucleation were studied. The reaction gas was mixture of methane and hydrogen or carbon monoxide and hydrogen. The nucleation density of applied bias -150V using $CH_4-H_2$ reaction gas system, significantly higher than that of $C-H_2$ reaction gas system. When the $CH_4-H_2$ reaction was used, nucleation density was increased because of existence of SiC as a interface for diamond nucleation. By use of this negative bias effect for fabrication of CVD diamond film using two-step diamond growth without pre-treatment, fabrication of the diamond film consist of diamond grains $0.2\mu\textrm{m}$ in diameter was demonstrated

• The Korean Journal of Ecology
• /
• v.9 no.1
• /
• pp.73-78
• /
• 1986

The effects of density and soil nutrient regime on competition between individuals in pure and mixed populations of two annuals. Chenopodium album and Digitaria sanguinalis were investigated at the level of enegy allocation. Seedling emergence of two species was extremely high (>90%) in both pure and mixed culture irrespective of the density and nutrient regime, but percentage of seedling establishment or fertile plant became gradually low with increasing density owing to 'self-thinning'. The mean plant dry weight was significantly reduced with increasing density and decreasing soil fertility. The dry matter production of D. sanguinalis in mixture was markedly greater than in pure culture under medium and high density. Also, as considered the number of seed production as reproductive allocation, relationship between them and the number of seed production per plant showed a similar tendency. Therefore, these results indicated that D. sanguinalis had a greater competitive advantage than C. album and energy allocations to variious organs were regulated by plastic response rather than determined genetically.

• Journal of the Korean Ceramic Society
• /
• v.35 no.3
• /
• pp.264-272
• /
• 1998

The effect of catalytic condition on the properties of SiO2 aerogels has been investigated and then the dri-ed aerogels were partially densified to induce mechanical strength by heat treatment in order to prepare Type-VI silica by Sol-Gel method. Aerogel made by 1-step base process had the highest skeletal density lowest shrinkage and the smallest particle size. But in case of using acid catalyst in both 1st and 2nd step had the lowest skeletal density highest shrinkage and the largest particle size The aerogel synthesized by 1-step base process was most transparent because of its homogeneous microstructure. During heat treatments cracks occurred below 200$^{\circ}C$ for aerogel with the skeletal density lower than 1.9 g/cm3 but the with the higher skeletal density did not cracked up to 800$^{\circ}C$ shrinkage and skeletal density increased as heating temperature increased due to condensation and viscous sintering mechanism.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.5
• /
• pp.204-208
• /
• 2011

In this paper, the design area of a fabricated solar cell has been analyzed with respect to its charge density. The mathematical calculation used for charge-density derivation was obtained from the 2001 version of a MATHCAD program. The parameter range for the calculations was ${\pm}1{\times}10^{17}cm^{-3}$, which is in the normal parameter range for n-type doping impurities ($7.0{\times}10^{17}cm^{-3}$) and also for p-type impurities ($4.0{\times}10^{17}cm^{-3}$). Therefore, it can be said that the fabricated solar-cell design area has a direct effect on charge-density changes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.229-232
• /
• 1997

A free space transmission method using standard gain horn antennas in the frequency range from 9.0 to 10.5GHz is applied to determine the dielectric properties of grain such as rough rice, brown rife and barley. The dielectric constant and loss factor, which depend on the moisture content of the wetted grain are obtained from the measured attenuation and phase shift by vector network analyzer. The effect of density fluctuation, which is an important parameter governing the dielectric properties of grain, on the dielectric constant and loss factor is presented. A new density-independent model in terms of measured attenuation and moisture density is proposed for reducing the effects of density fluctuation on the moisture content measurement.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.92-98
• /
• 1996

parallel bonding wires separaated with a screeing bonding wire are proposed and characterized in order to redue mutual coupling and parasitics of high-speed and high-density device packaging. The mehtod of moments (MoM) with the incorporation of the ohmic loss has been used in a wide range of frequencies. From the calculated results, we have found that the screening bonding wire effectively reduces inductive and capacitive crostalk levels more than 3dB. the parasitic self inductance is also reduced more than 12% by the screening effect. Therefore, for a general VLSi package, the packaging density can be increased more than 30% using the screening bonding wire. This screeing bonding wire and the analysis can be effectively used to reduce crosstalk and increase packaging density of high density devices.

• Journal of the Korean Ceramic Society
• /
• v.34 no.5
• /
• pp.453-460
• /
• 1997

Sr-ferrite having magnetoplumbite structure is similar to Ba-ferrite in magnetic characteristics, but better magnetic characteristics for using motor application. To improve remanence magnetic flux density(Br) and coercive force(iHc), it is necessary that sintered ferrites must have high density and grain size less than 1 $\mu$m. By varying n values in SrO.nFe2O3 basic composition, calcination temperature, and BaO addition, Sr-ferrite powder and sintered specimen was prepared. The n values, calcination temperature, and BaO addition affected secondary phase formation, particle size, and particle shape. BaO addition enhanced Fe2O3 secondary phase and hexagonal shape particle. Fe2O3 phase reduced sintered density which greatly decreased Br.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.3
• /
• pp.189-193
• /
• 2001

Critical cell density (CCD), the maximum cell concentration without mutual shading in algal cultures, can be used as a new operating parameter for high-density algal cultures and for the application of the flashing light effect on illuminated algal cultures. CCD is a function of average cell volume and light illumination area. The CCD is thus proposed as an index of estimation of mutual shading in algal cultures. Where cell densities are below the CCD, all the cells in photobioreactors can undergo photosysnthesis at their maximum rate. At cell densities over CCD, mutual shading will occur and some cells in the illumination chamber cannot grow photoautotrophically. When the cell concentration is higher than the CCD, specific oxygen production rates under flashing light were higher than those under continuous light. The CCD was found to be a useful engineering parameter for the application of flashing light, particularly in high-density algal cultures.

• Journal of Food Hygiene and Safety
• /
• v.12 no.1
• /
• pp.1-8
• /
• 1997

This study was performed to evaluate the antioxidant activity of silymarin against human low density lipoproteins(LDL) oxidation. Silymarin extracted from Silybum marianum was successively purified with solvent fractionation and followed by silica gel column chromatography. The active substances were separated by HPLC and the isolated active substances, silymarin were identified by IR, NMR, GC-MS as silymarin. Silymarin inhibited at the 5 $\mu$M Cu2+-mediated oxidation of human low density lipoprotein (LDL) in a dose dependent manner. Silymarin completely inhibited LDL oxidation at 50 $\mu\textrm{g}$/$m\ell$ concentration. These findings suggest that silymarin may protect LDL against oxidation in atherosclerotic lessions.