• Journal of Korea Water Resources Association
• /
• v.55 no.5
• /
• pp.383-392
• /
• 2022

The restoration of the Nakdong River estuary is one of the most important projects of the Ministry of Environment, Republic of Korea. A real-scale experiment of gate operation was executed from 2019 to 2020, and a pilot operation was performed in 2021. The gate of Nakdong River Estuary Barrier (NEB) is supposed to be continuously opened based on the experiment results. Many critical decisions should be made immediately during the experiment based on the real-time measured data and numerical analysis considering the seawater inflows. The decision-making sequence was made systematically with the accurate estimation of seawater inflow. The estimation of seawater inflow is the main research objective and the equations of seawater inflow were developed, reflecting the structural characteristics of NEB. The inflow equations were developed in two forms, overflow and underflow. ADCP (Acoustic Doppler Current Profiler) was used to measure seawater inflow, check the accuracy of the developed equations, and derive the flow coefficient. The comparison error of the developed equations was about 3% compared to the measured data.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.1
• /
• pp.148-158
• /
• 2022

The electrochemical CO₂ reduction (ECR) to produce value-added fuels and chemicals using clean energy sources (like solar and wind) is a promising technology to neutralize the carbon cycle and reproduce the fuels. Presently, the ECR has been the most attractive route to produce carbon-building blocks that have growing global production and high market demand. The electrochemical CO₂ reduction could be extensively implemented if it produces valuable products at those costs which are financially competitive with the present market prices. Herein, the electrochemical conversion of CO₂ obtained from flue gases of a power plant to produce diesel and formic acid using a consistent techno-economic approach is presented. The first scenario analyzed the production of diesel fuel which was formed through Fischer-Tropsch processing of CO (obtained through electroreduction of CO₂) and hydrogen, while in the second scenario, direct electrochemical CO₂ reduction to formic acid was considered. As per the base case assumptions extracted from the previous outstanding research studies, both processes weren't competitive with the existing fuel prices, indicating that high electrochemical (EC) cell capital cost was the main limiting component. The diesel fuel production was predicted as the best route for the cost-effective production of fuels under conceivable optimistic case assumptions, and the formic acid was found to be costly in terms of stored energy contents and has a facile production mechanism at those costs which are financially competitive with its bulk market price. In both processes, the liquid product cost was greatly affected by the parameters affecting the EC cell capital expenses, such as cost concerning the electrode area, faradaic efficiency, and current density.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.553-557
• /
• 2022

The present study evaluate the chloride extracion under electrochemical chloride extraction method. Chloride was penetrated into the concrete from external reservoir using a 4M NaCl solution, and an electrochemical chloride extraction method was applied after the curing period of 1 year. The current density was constantly kept 1000 mA/m² for coulostatic application with the variation in potential difference. The duration of the ECE treatment was 2, 4, 8 weeks, respectively. The residual chloride concentration at all depths decreased, and the chloride concentration decreased as the application period increased. After the application period of 8 weeks, 62.9 to 77.6 % of chloride extracted in the total chloride profile, and 77.7 to 99.5 % of chloride extracted in the free chloride profile. In particular, the concentration of free chloride at a depth of 7 mm or more from the concrete surface was 0.01 % or less by cement. In addition, it was confirmed that the bound chloride could be extracted by the electrochemical chloride extraction.

• Journal of the Korean Electrochemical Society
• /
• v.25 no.1
• /
• pp.1-12
• /
• 2022

Lithium metal is the most promising anode for next-generation lithium-ion batteries due to its lowest reduction potential (-3.04 V vs. SHE) and high specific capacity (3860 mAh/g). However, the dendritic formation under high charging current density remains one of main technical barriers to be used for commercial rechargeable batteries. To address these issues, tremendous research to suppress lithium dendrite formation have been conducted through new electrolyte formulation, robust protection layer, shape-controlled lithium metal, separator modification, etc. However, Li/Li symmetric cell test is always a starting or essential step to demonstrate better lithium dendrite formation behavior with lower overpotential and longer cycle life without careful analysis. Thus, this review summarizes overpotential behaviors of Li/Li symmetric cells along with theoretical explanations like initial peaking or later arcing. Also, we categorize various overpotential data depending on research approaches and discuss them based on peaking and arcing behaviors. Thus, this review will be very helpful for researchers in lithium metal to analyze their overpotential behaviors.

• Journal of The Korean Association of Information Education
• /
• v.26 no.4
• /
• pp.229-238
• /
• 2022

At the time of discussing the 2022 revised curriculum, the demand for normalization of information education is increasing. This study was conducted on the case of the information curriculum for the upper elementary grades responding to such needs. For 14 6th grade students of Elementary School B in K Metropolitan City, 4 core areas of the information curriculum, including computing system, data, algorithm & programming, and digital culture, were covered through classes. Cooperative classes were conducted between students by using the cloud-based application according to the class. In addition, it was intended to supplement the curriculum by suggesting ideas for artificial intelligence education area, and to improve the density of research with additional investigation on foreign information education cases. However, the need for independent organization of the information curriculum was strongly confirmed in that the current curriculum for information classes lacked sufficient school hours and had to be operated in combination with other subjects in the form of a project for this case study. It is hoped that this study will serve as a small foundation for the establishment of the information curriculum for the upper elementary grades in the future.

• Clean Technology
• /
• v.29 no.3
• /
• pp.178-184
• /
• 2023

Transition metal chalcogenides have garnered significant attention as anode materials for sodium-ion batteries due to their high theoretical capacity. Nevertheless, their practical application is impeded by their limited lifespan resulting from substantial volume expansion during cycling and their low electrical conductivity. To tackle these issues, this study devised a solution by synthesizing a nanostructured anode material composed of porous CNT (carbon nanotube) spheres and (Ni,Co)Se₂ nanocrystals. By employing spray pyrolysis and subsequent heat treatments, a porous-structured (Ni,Co)Se₂-CNT composite microsphere was successfully synthesized, and its electrochemical properties as an anode for sodium-ion batteries were evaluated. The synthesized (Ni,Co)Se₂-CNT microsphere possesses a porous structure due to the nanovoids that formed as a result of the decomposition of the polystyrene (PS) nanobeads during spray pyrolysis. This porous structure can effectively accommodate the volume expansion that occurs during repeated cycling, while the CNT scaffold enhances electronic conductivity. Consequently, the (Ni,Co)Se₂-CNT anode exhibited an initial discharge capacity of 698 mA h g^-1 and maintained a high discharge capacity of 400 mA h g^-1 after 100 cycles at a current density of 0.2 A g^-1.

• The Korea Journal of Herbology
• /
• v.24 no.1
• /
• pp.99-110
• /
• 2009

Objectives : The current treatment regimens for patients with nephrotic syndrome due to membranous nephropathy(MN) are based on steroids or immunosuppressive therapy with the aim of reducing proteinuria and improving outcome. Although these treatments attenuate the deterioration of renal function in MN patients, it has been suggested that all are burdened by significant toxicity. Therefore, more specific and less toxic therapies are needed. This study was to evaluate the effects of Coptidis Rhizoma Extract(CRE) on the MN induced by cBSA in mice. Methods : Mice were divided into 4 groups. One group named for 'Normal' was injected with a saline solution not to be immunized. The rest groups were treated as follows; After mice were immunized with 0.2 mg of cBSA and Freund's complete adjuvant one time every two weeks for 6 weeks, they received intra-peritoneal injection of 10 mg/kg of cBSA daily for 4 weeks. Also, they were divided into 3 groups. The first named for 'Control' was not given CRE. The second for 'CRE-250' was given oral administration of 250 mg/kg of CRE daily for 4 weeks. The third for 'CRE-500' was given 500 mg/kg of CRE. All of mice were sacrificed 4 weeks after the first immunization. We measured a body weight and 24hrs proteinuria as well as serological analysis. The morphologic changes of renal glomeruli were also observed with a light microscope and an electron microscope. Results : The levels of 24 hrs proteinuria, triglyceride, IgG, IL-6 were significantly decreased in both CRE groups. And the level of IgM was significantly decreased in CRE-250 group. In histological findings of kidney tissue, thickening of GBM and deposition of electron-density were consideraly decreased in both CRE groups. Conclusions : The present study suggests that CRE is highly effective when treating mice with MN induced by cBSA. More clinical data and studies are to be done for efficient application.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.1
• /
• pp.79-89
• /
• 2023

Development of efficient and stable electrocatalysts for oxygen evolution reaction (OER) under acidic conditions is desirable goal for commercializing proton exchange membrane (PEM) water electroyzer. Herein, we report iridium-doped hydrogenated titanate (Ir-HTO) nanobelts as a promising catalyst with a low-Ir content for the acidic OER. Addition of low-Ir (~ 3.36 at%) into the single-crystalline HTO nanobelts with large exposed {100} facets significantly boost catalytic activity and stability for OER under acidic conditions. The Ir-HTO outperforms the commenrcial benchmark IrO₂ catalyst; an overpotential for delivering 10 mA cm^-2 current density was reduced to about 25% for the Ir-HTO. Moreover, the catalytic performance of Ir-HTO is positioned as the most efficient electrocatalyst for the acidic OER. An improved intrinsic catalytic activity and stability are also confirmed for the Ir-HTO through in-depth electrochemical characterizations. Therefore, our results suggest that low-Ir doped single-crystalline HTO nanobelts can be a promising catalyst for efficient and durable OER under acidic conditions.

• Korean Journal of Environment and Ecology
• /
• v.36 no.6
• /
• pp.662-675
• /
• 2022

This study was intended to investigate and analyze the current status of the plant community structure in order to provide basic data for the systematic conservation and management of the Buxus sinica area appearing on the ridgeline connecting the Gyeokjabong(Mt.) and Keungiljae, on Bogildo Island. In consideration of location characteristics such as density, topography, and direction of B. sinica appearing in the shrub layers, a total of 26 sites were set as the survey area for representative vegetation communities or areas with changes in topography. According to DCA and TWINSPAN, it was classified into 6 communities, namely Carpinus turczaninovii-Deciduous broad-leaved, C. turczaninovii, C. turczaninovii-B. sinica, C. turczaninovii-Evergreen broad-leaved, Q. acuta, and D. trifidus-Q. acuta. The community dominated by C. turczaninovii maintains the status quo for the present moment, however, Q. acuta will dominate the surrounding area in the long term, so Q. acuta has high succesion potential. In the case of the Q. acuta and D. trifidus-Q. acuta communities, Q. acuta, known as the climax species of warm-temperate forests, will maintain dominant status. In a case of B. sinica, the community dominated by C. turczaninovii will remain in good status due to the topographical conditions, but the community dominated by Q. acuta growth difficulties are expected due to the high coverage. In the relationship between environmental factors and vegetation distribution, analysis showed that only soil pH affect vegetation distribution. Furthermore, the soil acidity (pH) was 3.78-5.30, the electrical conductivity was 0.186-0.543 dS/m, and the organic matter content was 2.25-2.89%.

• Journal of Internet of Things and Convergence
• /
• v.9 no.3
• /
• pp.93-98
• /
• 2023

In this paper, an artificial neural network based on simulated annealing was constructed. The mapping relationship between the parameters of micro-scaled flow channels electrochemical machining and the channel shape was established by training the samples. The depth and width of micro-scaled flow channels electrochemical machining on stainless steel surface were predicted, and the flow channels experiment was carried out with pulse power supply in NaNO3 solution to verify the established network model. The results show that the depth and width of the channel predicted by the simulated annealing artificial neural network with "4-7-2" structure are very close to the experimental values, and the error is less than 5.3%. The predicted and experimental data show that the etching degree in the process of channels electrochemical machining is closely related to voltage and current density. When the voltage is less than 5V, a "small island" is formed in the channel; When the voltage is greater than 40V, the lateral etching of the channel is relatively large, and the "dam" between the channels disappears. When the voltage is 25V, the machining morphology of the channel is the best.