• Title/Summary/Keyword: Density Factor

Search Result 2,696, Processing Time 0.029 seconds

Incident Light Intensity Dependences of Current Voltage Characteristics for Amorphous Silicon pin Solar Cells (비정질실리콘 pin태양전지에서 입사광 세기에 따른 전류 저압특성)

  • Jang, Jin;Park, Min
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.23 no.2
    • /
    • pp.236-242
    • /
    • 1986
  • The dependence of the current-voltage characteristics of hydrogenated amorphous silicon pin solar cells on the illumimination light intensity has been investigated. The open circuit voltage increases linearly with increasing the logarithm of light intensity up to AM 1, and nearly saturates above AM 1, indicating the open circuit voltage approaching the built-in potential of the pin solar cell above AM 1. The short circuit current density increase with light intensity in proportion to I**0.85 before and I**0.97 after light exposure. Since the series resistance devreses and shunt resistance increases with light intensily, the fill factor increases with light illumination. To increase the fill factor at high illumination in large area solar cells, t6he grid pattern on the ITO substrates should be made. Long light exposure on the solar cells gives rise to the increase of bulk resistance and defect states, resulting in the decrease of the fil factor and short circuit current density. The potential drop in the bulk of the a-Si:H pin solar cells at short circuit condition increases with decreasing temperature, and increases after long light exposure.

  • PDF

Factors Influencing Bone Mineral Density by Postmenopausal Ages (폐경 후 연령대별 골밀도 영향 요인)

  • Choi, Keum-Ja;Kim, Kyung-Hee
    • The Korean Journal of Health Service Management
    • /
    • v.11 no.4
    • /
    • pp.145-155
    • /
    • 2017
  • Objectives : To investigate the factors affecting bone mineral density in across stratified postmenopausal ages. Methods : Data from 1,698 subjects who completed the 2010-2011 National Health and Nutrition Survey were analyzed using SPSS Statistics 21.0 The $x^2$ test and one way (ANOVA) were used to verify the relationship between general characteristics and health behaviors and the prevalence of osteoporosis. Logistic regression analysis was used to verify the factors Influencing bone mineral density. Results : The bone mineral density distribution was the highest among those with osteopenia, with proportions of 21.8% in healthy subjects, 58.1% in osteopenia, and 20.0% in those with osteoporosis. The distribution of osteoporosis by age group was 5.2% among subjects in their 50s, 15.4% among those in their 60s, and 42.4% among those in their 70s. In multivariate logistic regression analysis, the prevalence of osteoporosis according to ages was significantly correlated with age, educational level, body mass index(BMI), and parity 4 of more than 1-2 babies. Conclusions : Although age is an uncontrollable factor in the prevention of osteoporosis, educational level and BMI are correctable factors to maintain bone mineral density. There is a need to maintain healthy BMI and expand osteoporosis prevention education.

Mapping the Spatial Distribution of Drainage Density Based on GIS (GIS 기반 유역 배수 밀도의 공간분포도 작성)

  • Kim, Joo-Cheol;Lee, Sang-Jin
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.18 no.1
    • /
    • pp.3-9
    • /
    • 2010
  • Drainage density, defined as the degree to which a landscape is dissected by streams, is a fundamental property of natural terrain that reflect the comprehensive morphologic response of watershed. In this study the spatial variability of drainage density is analyzed by statistical approach to it and its plotting method is proposed. Overland flow length is confirmed to be a highly variable spatial factor from the result of statistical analysis. Distribution map of drainage density based on spatial autocorrelation length in this study would be a superior tool to the classical definition of drainage density.

Factors Related to Bone-density among Post-menopause Women (폐경여성의 골밀도 예측요인)

  • Lee, Myung-Ok
    • The Journal of Korean Academic Society of Nursing Education
    • /
    • v.12 no.2
    • /
    • pp.214-223
    • /
    • 2006
  • Purpose: This study is to find the significant symptoms related to bone density, from which a cost-effective nursing diagnosis and intervention can be derived. Method: The research sample was 102 women, the sampling was designed by the researcher's convenience, and the subjects of the sample voluntarily participated in a questionnaire survey and measurements. The questionnaire asked socio-demographics, women' reproductive health symptoms, and the life style of the subject. Osteometer DTX-200 for bone density measure and a ruler for measuring spinal curvature were used. All the data were collected at the two public health clinics in a city in Korea. Result: The subjects' current and completed menopause ages, duration of menopause, degree of spinal curvature, BMI, frequency of parity and etc. showed significant correlations with bone density. However, only the degree of spinal curvature(p<.001, r=-.22) was found to be meaningful as a predicted factor for self diagnosis of bone density level. Conclusions: Since most of the subjects have not recognized the relationships between changes in spinal curvature and lowered bone densities, nurse needs to educate clients to get medical assistance to prevent from further bone density reduction by earlier finding of spinal curvature.

  • PDF

DENSITY STRUCTURE AND STABILITY OF THE SUBCOMPONENTS IN GIANT MOLECULAR CLOUD COMPLEXES

  • Yoo, Chin-Woo;Hong, Seung-Soo
    • Journal of The Korean Astronomical Society
    • /
    • v.19 no.1
    • /
    • pp.33-49
    • /
    • 1986
  • Radial distribution of internal density has been determined for thirteen subclouds in the three giant molecular cloud complexes accompanying Mon OB1, Mon OB2 and CMa OB1 associations, We modeled their radial density structures with the density distribution of isothermal gas spheres. Most of the subclouds, nine out of the thirteen, are well described by isothermal spheres of single component; while the rest four require an additional component. Total mass and potential energy of each subcloud are also derived from the radial density structure; thermal energy and internal velocity dispersion required for sustaining the density structure are deduced from the isothermal gas model. Our derived masses of the clouds are comparable to the values determined by Blitz (1978) under LTE assumption. This agreement suggests that the correction factor for non-LTE effect on mass-estimate is not far from unity. The ratio of the gravitational potential energy to the kinetic energy of thermal motion is as large as 250; hence the thermal motion alone cannot support these clouds against the gravity. Being supported by turbulence motion with velocities of six to seven times the thermal velocity, the clouds of one-component type seem to be in equilibrium with the gravity; while the clouds of two-component type are likely to be in the stage of gravitational collapse.

  • PDF

An Experimental Study for Suggestion of Simple Method of Determining the Maximum Relative Density (최대상대밀도 산정 간편법 제안을 위한 실험연구)

  • Lee, Jong-Jin;Kim, Myong-Mo;Lee, Seung-Hyun;Kim, Byoung-Il
    • Journal of the Korean Geotechnical Society
    • /
    • v.23 no.10
    • /
    • pp.23-31
    • /
    • 2007
  • Although the relative density is an important factor showing mechanical properties of granular soils, the methods for its estimation have not been satisfactorily standardized. Many researchers have proposed various methods to determine max, and min, dry density, but the results, especially for max, dry density, show significant differences. In this study, a simple and practical method of evaluating the max, relative density was proposed, which could give reliable results in comparison with conventional methods. The experiment was carried out by varying the number of blows and the layers of the sample for each mold and the results were compared with those of Bowles method.

On Bias Reduction in Kernel Density Estimation

  • Kim Choongrak;Park Byeong-Uk;Kim Woochul
    • Proceedings of the Korean Statistical Society Conference
    • /
    • 2000.11a
    • /
    • pp.65-73
    • /
    • 2000
  • Kernel estimator is very popular in nonparametric density estimation. In this paper we propose an estimator which reduces the bias to the fourth power of the bandwidth, while the variance of the estimator increases only by at most moderate constant factor. The estimator is fully nonparametric in the sense of convex combination of three kernel estimators, and has good numerical properties.

  • PDF

불포화 사질토 지반의 지반조건 및 침출수 오염도에 따른 전기비저항의 변화

  • 오명학;이주형;박준범;김형석
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2001.09a
    • /
    • pp.47-50
    • /
    • 2001
  • The laboratory tests were peformed to investigate the relationship between electrical resistivity and the unsaturated subsurface condition and to evaluate the contamination due to leachate based on measuring electrical resistivity. For weathered granite soil, the electrical resistivity of soil decreases as moisture density increases. The electrical resistivity of soil decreases as the concentration of leachate in pore fluid increases since leachate contains various ionic constituents. And the modified Archie's equation for applying to unsaturated sand is derived by regression analysis.

  • PDF

The analysis of performance characteristics of a L.I.M with taken into consideration of end effect(II) -eddy current & air-gap flux density- (단부교리를 고려한 L.I.M의 동작특성 해석(II))

  • 임달호;장석명
    • The Transactions of the Korean Institute of Electrical Engineers
    • /
    • v.36 no.4
    • /
    • pp.240-251
    • /
    • 1987
  • In this paper, with the end effect taken into consideration, the fundamental characteristics of a linear induction motor-the eddy currents of the secondary conducting sheet (traveller), the flux density in the air gap-are analysed by means of electromagnetic field theory. Accordingly, the derived governing eqations of the chatacteristics with goodness factor, presents that it was possible not only to predict the performance characteristics, but to obtain the data that needs to optimize a design of a motor with the reduction of the end effect.

  • PDF

High-Resolution LTPS TFT-LCDs for mobile phone applications

  • Ha, Yong-Min;Hwang, Han-Wook;Kim, Sang-Ho;Park, Jae-Deok;Cha, Soo-youle
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 2005.07a
    • /
    • pp.21-25
    • /
    • 2005
  • In order to implement high pixel density in AMLCDs, high aperture ratio is a very important design factor. We have implemented VGA panels with IPS and TN modes. IPS mode is a very attractive solution to meet the requirement for mobile phone displays. It provides much higher aperture ratio as well as wider viewing angle at extremely high pixel density over 400 ppi.

  • PDF