• 제목/요약/키워드: Delta power

검색결과 754건 처리시간 0.026초

한일상관기의 잔차 지연 보정 알고리즘의 개선 (Improvement of Residual Delay Compensation Algorithm of KJJVC)

  • 오세진;염재환;노덕규;오충식;정진승;정동규
    • 융합신호처리학회논문지
    • /
    • 제14권2호
    • /
    • pp.136-146
    • /
    • 2013
  • 본 논문에서는 FX 형식의 한일상관기(Korea-Japan Joint VLBI Correlator, KJJVC)의 잔차 지연 보정 알고리즘을 제안하였다. KJJVC의 초기 잔차 지연보정 알고리즘에는 연산의 고속화를 위해 정수 연산과 위상보정 계수를 위한 cos/sin table을 도입하였다. 그리고 잔차 지연 알고리즘의 초기설계에서 데이터의 타이밍과 잔차 지연 위상의 불일치와 비트쉬프트와 잔차 지연 위상의 불일치 문제를 해결하였다. VCS의 잔차 지연 알고리즘의 최종 설계에서는 잔차 지연보정된 값을 FFT segment에 적용할 때 잔차 지연 보정 회전 메모리가 초기화 되지 않는 것을 수정하였다. 제안한 잔치 지연 보정 알고리즘을 이용하여, 교차 전력 스펙트럼의 대역폭 모양이 모든 대역폭에 대해서 손실이 없이 평탄한 것을 확인하였다. 제안한 잔차 지연보정 알고리즘의 유효성을 확인하기 위해 시뮬레이터와 KJJVC를 이용하여 실제 관측데이터를 대상으로 상관처리 시험을 수행하였다. 실험결과를 통하여 제안한 잔차 지연 보정 알고리즘이 KJJVC에 잘 적용되고 있으며, 신호대 잡음비가 약 8% 향상되는 것을 확인하였다.

소아 수면무호흡증 환아와 정상 소아에서 수면구조와 뇌파 양상 차이 (Differences of EEG and Sleep Structure in Pediatric Sleep Apnea and Controls)

  • 안영민;신홍범;김의중
    • 수면정신생리
    • /
    • 제15권2호
    • /
    • pp.71-76
    • /
    • 2008
  • 목 적:본 연구에서는 소아 수면무호흡증 환자의 수면구조와 뇌파특성을 성별, 연령이 짝 지워진 정상군과 비교하여 수면무호흡의 영향을 비교 분석하였다. 방 법:코골이 증상을 호소하고 소아과 의사의 임상소견상 수면무호흡증이 의심되는 15명(남:여=4:11)와 정상군 15명(남:여=5:10)을 대상으로 수면다원검사를 시행하였다. 두 군의 수면다원검사에서 얻어진 수면구조관련 변인, 수면무호흡관련 변인과 스펙트럼 분석을 통해서 얻어진 뇌파 주파수별 스펙트럼을 비교하였다. 결 과:수면무호흡증군은 정상군에 비해 무호흡지수, 호흡장애지수, 혈중산소포화도 최저값 등에서 뚜렷한 차이를 보였다. 수면무호흡증군은 수면구조 분석상 1단계 수면의 비율증가, 렘수면 비율 감소 소견을 보였으며 뇌파 스펙트럼 분석상 O1채널의 델타파 증가 소견 외에는 정상군과 차이를 보이지 않았다. 결 론:소아수면 무호흡의 경우, 진단기준의 특성상 수면 무호흡이 심하지 않은 경우가 많이 포함될 수 있으며, 그 결과 무호흡으로 인한 수면구조의 와해가 뚜렷하지 않았다. 또 각성 횟수도 성인수면 무호흡에 비해 적어서 뇌파변화도 뚜렷하지 않았다. 본 연구를 통해 소아수면 무호흡증의 일반적인 양상과 특수성을 관찰할 수 있었다.

  • PDF

$YBa_2Cu_3O_{7-x}$ 결정입계 접합을 이용한 마이크로파 감지소자 (Microwave Detector Using $YBa_2Cu_3O_{7-x}$ Grain Boundary Junction)

  • 신중식;조창현;황두섭;김영근;위당문;천성순;신우석;배성준;홍승범
    • 한국재료학회지
    • /
    • 제4권6호
    • /
    • pp.681-686
    • /
    • 1994
  • $YBa_{2}Cu_{3}O_{7-x}$결정입계 접합을 이용한 마이크로파 감지소자 $YBa_{2}Cu_{3}O_{7-x}$초전도체 박막을 화학증착법을 이용하여 $LaAIO_{3}$단결정 위에 증착하여 임계온도 90K이상 임계전류밀도 $10^5/A \textrm{cm}^2$(77K) 이상의 우수한 박막을 제작하였다. 이를 포토작업과 이온밀링을 실시하여 수 마이크로미터 크기의 브릿지 형태로 만든 후 이들의 전류전압 특성을 조사하였다. 브릿지에 입사된 마이크로파의 크기에 따라 브릿지 간의 임계전류값의 저하가 관찰되었으며 동시에 샤피로스텝을 관찰할 수 있었다.

  • PDF

미행성 지구충돌의 역사 II: 2002년 데이터베이스를 이용한 주기분석 (TERRESTRIAL IMPACT CRATERING CHRONOLOGY II : PERIODICITY ANALYSIS WITH THE 2002 DATABASE)

  • 문홍규;민병희;김승리
    • Journal of Astronomy and Space Sciences
    • /
    • 제20권4호
    • /
    • pp.269-282
    • /
    • 2003
  • Grieve(1991), Moon et al.(2001), Earth Impact Database(2002; DB02) 등 세 가지 충돌구 DB를 이용해서 미행성 지구충돌 사건의 주기성 여부를 조사했다. 특히 DB02는 과거 사용됐던 데이터베이스들에 비해서 연령 측정오차가 크게 향상되었으며, 이를 이용한 주기분석 발표는 이번이 처음이다. DB02(나이 $t{\leq}250Myr$$t{\leq}150Myr$, 나이오차 ${\Delta}t{\leq}{\pm}10Myr$)에 대 한 Fourier 분석 결과, $D{\geq}5km$$D{\geq}20km$인 표본의 경우, 주기성이 검출되지 않았다. 그러나 $D{\geq}30km$인 표본인 경우 16.1Myr와 34.7Myr에서 두 개의 피크가 나타났고, $D{\geq}45km$인 표본은 16.1Myr부근에서 강한 파워를 보였다. 이로부터 우리는 $d{\geq}1.5km$인 천체의 주기적인 지구 충돌 가능성을 고려할 수 있으며, 충돌구 나이의 정밀도는 물론 t와 D의 범위, 그리고 데이터베이스의 선택이 미행성의 지구충돌의 역사를 재구성하는데 중요한 변수로 작용한다는 사실을 확인했다.

RABiTS 위에 PLD 방법으로 증착된 YBCO 초전도 박막 선재의 제조 (Manufacturing of YBCO coated conductor deposited on RABiTS by pulsed laser deposition method)

  • 고락길;;정준기;하홍수;김호섭;송규정;박찬;문승현;유상임;김영철
    • Progress in Superconductivity
    • /
    • 제6권1호
    • /
    • pp.74-78
    • /
    • 2004
  • YBCO coated conductor is one of the most promising materials as a new generations wire especially for practical power applications. In this work, $YBa_2$$Cu_3$$O_{7}$ -$\delta$/(YBCO) coated conductors (CC) were deposited by pulsed laser deposition (PLD) from buffer layers to superconducting layer on hi-axially textured metal tape. The oxide multilayer buffered substrate of architectures of $CeO_2$/$YSZ/Y_2$$O_3$ was fabricated by PLD at steady status. Then YBCO layer was deposited on RABiTS substrate by stationary and reel-to-reel (R2R) continuous process and we compared with deposition conditions of both processes. The degree of texture of each layer was investigated using X-ray diffraction including $\theta$-2$\theta$ scans, $\omega$-scans and $\Phi$-scans analysis. Their surface morphology was observed by scanning electron microscopy (SEM). The FWHM of the X-ray $\Phi$-scans and $\Phi$-scans indicated that YBCO and buffer layers closely replicate the in-plane and out-of-plane texture of metal tape. Critical current (Ic) at 77 K, self-field of 75.8 A/cm-width, critical temperature (Tc) of 85 K, and critical current density (Ic) of 3.7 MA/$\textrm{cm}^2$ were measured from coated conductor deposited by stationary process. And coated conductor deposited by R2R continuous process had Ic of 57.5 A/cm-width, Tc of 86.5 K and Jc of 2.0 MA/$\textrm{cm}^2$. The film also exhibits a homogeneous and dense surface morphology.

  • PDF

자침이 중풍환자의 뇌파 변화에 미치는 영향 (The Effects of Acupuncture on the Electroencephalogram of Patients with Stroke)

  • 윤가영;박지민;김동혁;선종인;강중원;남동우;이승덕;최도영;이재동
    • Journal of Acupuncture Research
    • /
    • 제29권5호
    • /
    • pp.1-16
    • /
    • 2012
  • Objectives : The purpose of this study was to examine the effects of manual acupuncture at the $LI_4$, $ST_{36}$ and $LR_3$ on Electroencephalogram(EEG) of patients with stroke. Methods : 32 channel EEG measurement was carried out in 35 Stroke patients(23 males and 12 females). EEG was measured for 21 minutes(made up of 7 sessions, 1 session means 3 minutes time interval) including 15 minutes(5 sessions) of acupuncture time. Power spectrum analysis was used as a measure of complexity. Statistical analysis was performed using Linear mixed model and DUNNETT's multiple comparison. Results : The results were as follows; 1. EEG amplitude was reduced during acupuncture except electrodes PG1 and PG2. 2. There was a notable change during 6~9 minutes after needling in ${\delta}{\cdot}{\beta}{\cdot}{\gamma}$ wave, and during 6~9 minutes after needling in ${\Theta}{\cdot}{\alpha}$ wave. Overall, during 6~9 minutes after needling. 3. TP8 is a common significant electrode among five wave forms. Conclusions : These results suggest that TP8 could be typical electrodes and change of EEG compared to baseline happens most often during 6~9 minutes after manipulated acupuncture at the $LI_4$, $ST_{36}$ and $LR_3$ of patients with stroke.

PLD법에 의한 혼합된 희토류계$(Nd_{1/3}Eu_{1/3}Gd_{1/3})Ba_2Cu_3O_{7-x}$ 고온 초전도 박막 (Mixed rare earth $(Nd_{1/3}Eu_{1/3}Gd_{1/3})Ba_2Cu_3O_{7-d}$ thin films by PLD)

  • 고락길;배성환;정명진;장세훈;송규정;박찬;손명환;강석일;오상수;하동우;하홍수;김호섭;김영철
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 춘계학술대회 논문집
    • /
    • pp.3-3
    • /
    • 2009
  • In order to investigate the possibility of using mixed rare earth $(Nd_{1/3}Eu_{1/3}Gd_{1/3})Ba_2Cu_3O_{7-x}$ (NEG123) as the superconducting layer of the HTS coated conductor, the NEG123 thin film was deposited epitaxialy on LAO(100) single crystal and IBAD_YSZ metal templates by pulsed laser deposition. Systematic studies were carried out to investigate the influences of deposition parameters of PLD on the micro structure, texture and superconducting properties of NEG-123 coated conductor. Deposition at oxygen partial pressure of 600 mTorr was needed to routinely obtain high quality NEG123 films with $J_c$'s (77K) over 2 MA/$cm^2$ and Tc's over 90K (${\Delta}T{\sim}2\;K$). We verified from magnetization study that the NEG123 has an improved in-field Jc as the field increases at temperatures between 10 K and 77 K compared with Gd123. The $J_c$ (77K, self field) and the value of onset $T_c$ of NEG123 thin film on LAO substrate was $4.0MA/cm^2$ and 92K, respectively. This is the first report, to the best of our knowledge, of coated conductors with NEG123 film as the superconducting layer which have Ic and Jc over 40 A/cm-width and 1.6 MA/$cm^2$ at 77K, self field. This study shows the possibility of using NEG123 film as the superconducting layer of the HTS coated conductor which can be used in high magnetic field power electric devices.

  • PDF

원자력分野 에서의 破壞力學 現況 -법적 요구사항을 중심으로 (II)-

  • 송달호;손갑헌
    • 기계저널
    • /
    • 제21권1호
    • /
    • pp.21-31
    • /
    • 1981
  • 원자력발전소의 원자로냉각재 압력경계의 건전성과 안정성을 확보하기 위하여 법적 요구조건을 설정함에 있어 파괴역학이 어떻게 적용되었는 가를 설명하였다. 이를 요약하면 다음과 같다. 1) 압력경계에 사용되는 재료의 $RT_{NDT}$를 정의하였다. 이는 무연성천이온도와 같은 개 념의 것으로, 앞으로 재료의 파괴인성은 이 $RT_{NDT}$에 대한 상대온도의 함수로 주어진다. 2)비연성파괴를 방지하기 위한 설계조건으로서 선형탄성 파괴역학에 근거한 조건식을 인용하였다. 여기서 조건식이란 능력확대계수의 합계가 어떠한 조건에서도 이러한 조건식을 만족한다는 것을 해석적으로 확인하고 규제당국의 승인을 받아야 한다. 3) 가동중검사에 발견된 결함으로 합격수준을 초과하는 것은 파괴역학적으로 해석하여 구조적 으로 안전하다는 것은 파괴역학적으로 해석하여 구조적으로 안전하다는 것을 입증하여야 한다. 이때 결함은 원자로의 가동과 더불어 성장하므로 수명기간중 피로파괴에 이를 것인지의 여부도 평가하여야 한다. 이때의 대조균열성장률은 Paris의 power law에 따른다. 4) 고속중성자 (E>1. 0MeV)에 의한 조사취화를 감시하기 위하여 감시시험계획을 사전에 수립 하고 이에 따라 감시시험을 수행하여 조사에 수립하고 이에 따라 감시시험을 수행하여 조사에 의한 원자로용기 재료의 파괴인성의 저하를 평가하여 이를 고려한 충분한 안전여유를 갖는 운 전조건 즉, 압력-온도 한계곡선을 산출하여야 한다. 이때의 취화 정도는 DELTA. $RT_{NDT}$ 와 Upper Shelf Energy의 감소로 나타낸다. 또한, 압력-온도 한계곡선은 선형관성 파괴역학에 입각한 조건식을 이용하여 해당 온도에서의 압력을 산출한다. System을 개발 사용하기 위하여 기존 전자계산소를 이용하는 방법이 바람직하며 System의 도입은 자체운영을 결정하기 전에 경제적인 여건 등 여러가지 문제를 검토하여야 한다. 특히 Turn Key Base로 System를 도입할 경우에는 System의 도입목 적과 사용빈도, 앞으로의 확장성 현재 설계및 생산 과정과의 마찰가능성, 유지보수문제 등을 신 중히 검토하여야 한다. 이제 기계공업도 전자계산기를 이해하고 사용하므로 서 발전할 수 있는 단계가 되었다. 예로부터 좋은 공구를 개발하여 적절히 사용하는 것이 기계공업 발전의 첩경이 었다. 전자계산기는 현대 기술이 개발한 가장 강력하고 사용하기 좋은 공구이다.점에서 피로구열의 안정성장을 논하고, 과거 10여년간의 피로 crack문제에 대한 연구방법, 실험방법 등을 소개하는 방향으로 고 를 진행시켜 나가겠다.에 그 효과가 증대됨을 알 수 있었다.적용한 임상실험이 수행되어야 할 것이다. 또한 위치결정에서 획득한 좌표값의 정확성을 알아보기 위해서 팬톰을 이용한 방사선조사 실험이 추후에 실행되어져야 할 것이다. 그리고 제작된 프레임에 Rotating X선 시스템과 내부 장기의 움직임을 계량화하고 PTV에서의 최적 여유폭을 설정함으로써 정위 방사선수술 및 3 차원 업체 방사선치료에 대한 병소 위치측정과 환자의 자세에 대한 setup 오차측정 결정에 도움이 될 수 있을 것이라고 사료된다. 상대적으로 우수한 것으로 나타났으며, 혼합충전재는 암모니아의 경우 코코넛과 펄라이트의 비율이 7:3인 혼합 재료 3번과 소나무수피와 펄라이트의 비율이 7:3인 혼합 재료 6번에서 다른 혼합 재료에 비하여 우수한 것으로 나타났다. 4. 코코넛과 소나무수피의 경우 암모니아 가스에 대한 흡착 능력은 거의 비슷한 것으로 사료되며,

  • PDF

아세트아미노펜 액상좌제의 제초 및 생물학적 동등성 평가 (Preparation and Bioequivalence Test of Acetaminophen Liquid Suppository)

  • 김종국;최한곤;이사원;고종호;이미경
    • Biomolecules & Therapeutics
    • /
    • 제6권2호
    • /
    • pp.213-218
    • /
    • 1998
  • A novel in situ-gelling and mucoadhesive acetaminophen liquid suppository was developed to improve the patient compliance of conventional solid suppository. In this study, acetaminophen liquid suppository, Likipe $n_{R}$, [aminophen/Poloxamer 407/Poloxamer 188/so4ium alginate (5/15/19/0.6%)] with relation temperature at 30-36 "C and suitable gel strength and bioadhesive force, dissolution pattern similar to conventional solid type suppository, Suspe $n_{R}$, was developed. Furthermore, the bioequivalence of two acetaminophen products was evaluated in 16 normal male volunteers (age 22-27 yr, body weight 56-72 kg) following sidle rectal administration. Test product was Likipe $n_{R}$ suppository (Dong-Wha Pharm. Corp., Korea)and reference product was Suspe $n_{R}$204-212 suppository (Hanmi Pharm. Corp., Korea). Both products contain 125 mg of acetaminophen. Four Suppositories of the test and the reference product were administered to the volunteers, respectively, by randomized two period cross-over study (2$\times$2 Latin square method). The determination of acetaminophen was accomplished using HPLC. Average drug concentrations at each sampling time and pharmacokinetic parameters calculated were not significantly different between two products (p>0.05); the area under the curve to last sampling time (24 hr) (AU $Co_{-2}$4h/) (30.14$\pm$8.64 vs 27.98$\pm$ 6.53 $\mu$g .h/ml), maximum plasma concentration ( $C_{max}$) (3.29$\pm$0.87 vs 3.60$\pm$0.66 $\mu$g/ml) and time to maximum plasma concentration ( $T_{max}$) (2.91 $\pm$0.55 vs 2.69$\pm$0.60 h). The differences of mean AUCo $_{24h}$, C-a. and T-between the two products (7.18%, 9.58% and 7.53%, respectively) were less than 20%. The power (1-7) and treatment difference ($\Delta$) for AU $Co_{24h}$, $C_{max}$ and $T_{max}$ were more than 0.8 and less than 0.2, respectively at $\alpha$=0.1. The confidence limits for AU $Co_{24h}$, $C_{max}$ and $T_{max}$ (-0.81 ~13.55%, -1.56~ 17.60 and -3.81 ~18.87%, respectively) were less than $\pm$ 20% at $\alpha$=0.1. These results suggest that the bioavailability of Likipe $n_{R}$ suppository is not significantly different from that of Suspe $n_{R}$ suppsitory. Therefore, two products are bio-equivalent based on the current results.results.lts.sults.results.lts.

  • PDF

고구마가루 첨가가 백설기의 품질특성에 미치는 영향 (Effect of Added Sweet Potato Flour on the Quality Characteristics of the Korean Traditional Steamed Rice Cake, Backsulki)

  • 이지현;김병기
    • 산업식품공학
    • /
    • 제14권2호
    • /
    • pp.135-145
    • /
    • 2010
  • 백설기 원료인 쌀가루에 당 및 식이섬유의 함량이 높은 것으로 알려진 고구마가루를 5, 15, 25%(w/w, dry-weight basis) 비율로 첨가하여 원료 및 제품에서 나타나는 이화학적 품질과 제품의 관능특성, 및 저장성을 관찰하였다. 쌀가루에 대한 고구마가루 첨가량이 증가할수록 제품의 수분결합력, 팽윤도가 증가하였으며 외관에 있어서 적색도 및 황색도가 증가한 반면 전체적인 외관은 다소 어두워졌다. DSC(Differential Scanning Calorimeter)에 의한 열적특성의 분석결과 고구마가루의 H는 28.1 J/g으로서 19.1 J/g인 쌀가루에 비해 2배 정도로 높아 호화경향이 낮은 것으로 조사되었다. DSC thermogram에 나타난 전분의 노화도 경향은 고구마가루 첨가량이 증가할수록 감소하여 고구마가루 첨가량에 비례한 제품의 노화억제효과가 확인되었다. 제품의 경도, 응집성, 탄력성, 씹힘성 등은 고구마가루 첨가에 따라 감소하였으며 또한 경도증가율이 낮아져 고구마가루의 노화지연 효과가 확인되었다. 백설기 내의 고구마가루 첨가는 상대적으로 낮은 저장온도에서 제품의 경도증가를 억제하는 경향이 있었다. 그러나 제품의 경도변화의 폭은 저장온도 보다 고구마가루 첨가의 영향을 더 많이 받는 것을 알 수 있었다. 미생물적 특성에 있어서 제품을 실온에서 3일간 저장 시 고구마가루 첨가량에 따라 총 미생물수가 미첨가구에 비해 최고 1/10정도까지 낮게 유지되었다. 제품의 외관과 색을 제외한 전반적 기호특성은 고구마가루 첨가에 따라 향상되었으며 특히 15% 첨가구가 가장 좋은 평가를 받았다.