• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.51-60
• /
• 2005

This paper describes a robust control scheme for high-speed and long stroke scanning motion of high precision linear motor system consisting of linear motor, air bearing guide and position measurement system using heterodyne interferometer. Nowadays, semiconductor process and inspection of wafer or LCD need high speed and long travel length for their high throughput and extremely small velocity fluctuations or tracking errors. In order to satisfy these conditions, linear motor system are widely used because they have large thrust force and do not need motion conversion mechanisms such as ball screw, rack & pinion or capstan with which the system are burdened. However linear motors have a problem called force ripple. Force ripple deteriorates the tracking performances and makes periodic position errors. So, force ripple must be compensated. To maximize the tracking performance of linear motor system, we propose the control scheme which is composed of a robust control method, Time Delay Controller (TDC) and a feedforward control method, Zero Phase Error Tracking Control (ZPETC) for accurate tracking a given trajectory and an adaptive force ripple compensation (AFC) algorithm fur estimating and compensating force ripple. The adaptive ripple compensation is continuously refined on the basis of tracking error. Computer simulation results based on modeled parameters verify the effectiveness of the proposed control scheme for high-speed, long stroke and high precision scanning motion and show that the proposed control scheme can achieve a sup error tracking performance in comparison to conventional TDC control.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권7호
• /
• pp.1178-1184
• /
• 2004

This paper presents the development of a satellite antenna tracking control system using a plane antenna for mobile DAB(Digital Audio Broadcasting) reception. To track more rapidly in the antenna of this system, this simple tracking system only tracks a direction of azimuth using pendulum in the direction of elevation. This system should track using the AGC(Automatic Gain Control) of the signal level which can receive DAB in spite of the changing of point and movement of the mobile. The directional gyro sensor is attached to solve the delay time in the Proposed tracking algorithm. The effectiveness of both the stabilization and tracking algorithm is demonstrated through experiment measuring AGC signal level. The implemented satellite antenna tracking control system is shown to be excellent for mobile DAB reception.

• 전자공학회논문지SC
• /
• 제44권1호
• /
• pp.33-39
• /
• 2007

LonWorks/IP VDN은 LonWorks 디바이스 네트워크와 IP(데이터) 네트워크와의 통합네트워크로 산업현장에 대한 유비쿼터스 접근을 제공하여 설비에 대한 예지 및 예방보전을 가능하게 한다. 산업현장에 대한 예지 및 예방보전을 위한 실시간 분산제어 환경에서 즉각적인 응답은 필수불가결한 요소이다. LonWorks/IP 가상 디바이스 네트워크(VDN) 상에서 불확실한 시간지연은 산업현장에 대한 실시간 예지 및 예방보전을 위해 분산 제어를 수행할 때 시스템의 안정성과 성능을 악화시킨다. 따라서 네트워킹 된 분산제어시스템의 안정성을 보장하고 성능을 개선하기 위해서는 시간에 따라 가변적인 불확실한 시간지연을 보상할 필요가 있다. 본 논문에서는 LonWorks/IP VDN와 같은 분산제어 환경 하에서 서보 제어를 수행하는 경우에 외란관측기와 위상지연 보상기로 ZPETC(Zero Phase Error Tracking Controller)를 도입한 제어구조가 제시되고 컴퓨터 모의실험이 수행된다. 제안된 제어기의 성능은 컴퓨터 모의실험을 통하여 외란관측기를 도입한 Smith 예측기 기반의 내부모델제어기(IMC)의 제어결과와 비교 제시된다. 제안된 제어기는 외란과 잡음에 강인한 특성을 가지며, 주기적인 신호에 대한 추종성능을 상당히 개선시키므로 가변적인 시간지연을 갖는 LonWorks/IP VDN 상에서 주기적인 작업 수행에 필요한 분산 서보제어에 매우 적합하다.

• 대한전자공학회논문지
• /
• 제15권5호
• /
• pp.13-18
• /
• 1978

본 논문에서는 PLL의 pull-in 특성을 개선하기 위하여 delay switching PL난을 제시하였다. phase detector와 low grass filter사이에 간단한 RC delay회로를 삽입하고, 90° shift 시킨 Phase detector출력에 의하여 delay time을 switching하였다. 그 결과 pull-in range는 lock range의 1/2이상으로 넓힐 수 있었으며 pull-in time도 개선되었다. 이 개선된 Pull-in특성은 근사적으로 해석되었으며 실험으로 확인되었다.

• Journal of Positioning, Navigation, and Timing
• /
• 제1권1호
• /
• pp.1-6
• /
• 2012

For a Global Positioning System (GPS) receiver, it is known that a Vector Delay Locked Loop (DLL) in which the code signals of each satellite are tracked in parallel by using navigation results shows better performance in the aspect of the tracking accuracy and the robustness than that of a Scalar DLL. However, the quantitative analysis and the logical grounds for that performance enhancement of the Vector DLL are not sufficient. This paper, therefore, proposes the structure of the GPS receiver with the Vector DLL and analyzes the performance of it. The tracking and the positioning accuracy of the Vector DLL are theoretically analyzed and confirmed by simulation results. From the simulation results, it can be seen that the tracking and positioning accuracy has been improved about 30% in case that the receiver is static and the positioning is conducted for every Pre-detection Integration Time (PIT) while C/N0 is 45 dB-Hz.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1271-1279
• /
• 2017

A highly accurate model-free controller is proposed for trajectory tracking control of robot manipulators. The proposed controller incorporates time-delay estimation (TDE) to estimate and cancel continuous nonlinearities of robot dynamics, and exploits fuzzy logic systems to suppress the effect of the TDE error, which is due to discontinuous nonlinearities such as friction. To this end, integral sliding mode is defined using desired error dynamics, and a Mamdani-type fuzzy inference system is constructed. As a result, the proposed controller achieves the desired error dynamics well. Implementation of the proposed controller is easy because the design of the controller is intuitive and straightforward, and calculations of the complex robot dynamics are not required. The tracking performance of the proposed controller is verified experimentally using a 3-degree of freedom PUMA-type robot manipulator.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.335-338
• /
• 1996

In this paper, we are going to design an iterative learning controller with the robust properties for initial error. For this purpose, the PID-type learning law will be considered and the design guide-line will be presented for the selection of the learning gain. Also, we are going to suggest a condition for the convergence of control input for a plant with input delay. Several simulation results are presented, which shows the effectiveness of the proposed algorithms.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(3)
• /
• pp.189-192
• /
• 2000

This paper presents a new DR(Dead Reckoning) algorithm in client-server-based networked virtual environment using network delay estimation. In the algorithm, a new update packet is sent to server (or client) whenever the difference of current real value and tracking value after network delay is larger than threshold. To confirm the proposed algorithm, a test network game was implemented. Through iterative field tests, we knew that this algorithm provides fair service and stability.

• 전기의세계
• /
• 제20권4호
• /
• pp.17-22
• /
• 1971

This paper deals with the analytic structure of feedback controller for linear time invariant discrete systems. On the way of developing the deadbeat controller, some necessary conditions for control policy have been derived. In the case of time delay, it was proved that the q periods delay in the control causes q periods delay in the point at which deadbeat response occurs. Theorems and conclusions are illustrated with some simple nontrivial numerical examples and signal state tracking application problems.

• 한국정보통신학회논문지
• /
• 제13권2호
• /
• pp.397-406
• /
• 2009

차량 간 무선 통신을 목적으로 만들어진 직교 주파수 분할 다중화 (OFDM: Orthogonal Frequency Division Multiplexing)기반 WAVE(Wireless Access for Vehicular Environment) 시스템의 물리층 표준은 기존에 표준화된 IEEE802.11a 무선랜(WLAN: Wireless Local Area Network)의 표준을 따르는 것으로 되어 있다. 따라서 WAVE는 초기 동기 이후 차량 간 다중 경로 페이딩(Multipath Fading) 채널의 영향으로 인하여 심볼 타이밍에 있어서 연속적인 시간 지연이 발생함에 따라 시스템의 수신 성능이 저하되게 된다. 본 논문은 추가적인 심볼 시간 지연을 보상해 주기 위한 심볼 시간 추적(Tracking) 알고리듬을 제안하고 있다. 본 논문에서는 제안된 알고리듬을 최대 지연 시간 (Maximum Timing Delay)이 적용된 최악의 통신환경에 적용하여 모의실험을 수행하였다. 실험결과에 의하면 제안된 알고리듬은 가산성 백색 가우스 잡음 (AWGN: Additive White Gaussian Noise) 채 널 및 페이딩 채널 환경에서 시스템의 수신 성능을 향상시킬 수 있음을 확인할 수 있다.