• 한국산업융합학회 논문집
• /
• 제20권3호
• /
• pp.205-212
• /
• 2017

This paper focuses on worst-case delay analysis of the time-triggered IEEE 802.15.4 protocol to satisfy the industrial quality-of-service (QoS) performance. The IEEE 802.15.4 protocol is considered to be unsuitable for industrial networks because its medium access control method is contention-based CSMA/CA, which exhibits unstable performance with an unbounded delay distribution under heavy traffic. To avoid these limitations, this paper presents a time-triggered version of the nonbeacon-enabled network of IEEE 802.15.4 that relies on a time division multiplexing access (TDMA) method implemented in the application layer without any modification of specification. The timing analysis of this time-triggered IEEE 802.15.4 was executed, and the worst-case transmission delay was calculated. Based on this analysis, the time-triggered IEEE 802.15.4 is a promising alternative for wireless industrial networking.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.140-145
• /
• 1994

In this paper, we consider a problem to estimate process parameters using input-output data collected from the process operating in closed-loop control system. When orders and delay-time of the process are known correctly, under some conditions of identifying experiments, it is reported that accurate identification results can be obtained by applying prediction error method. To get accurate estimates, it is necessary to know orders and delay-time of the process. It is difficult to determine them in closed-loop identification, because ill-condition for identification are easily caused by selection of unsuitable order or delay time. Furthermore, the procedures to select orders and delay-time in open-loop identification aren't always available in closed-loop identification. The purpose of this paper is to determine a delay-time under suitable assumption that order of the process are known as the first step.

• Transactions on Control, Automation and Systems Engineering
• /
• 제2권3호
• /
• pp.149-156
• /
• 2000

Time delay observer (TDO), thanks to the time delay control (TDC) concept, requires little knowledge of a plant model, and hence is easy to design, robust to parameter variation and computationally efficient, yet can reconstruct states rather reliable for nonlinear plant. In this paper, we propose an improved version of TDO that solves two problems inherent in TDO as follows: TDO displays large reconstruction errors due to low-frequency uncertainty and has some restrictions on selecting its gains. By introducing a low pass filter and a state associated with it, we obtain an enhanced time delay observer (ETDO). This observer turns out to have smaller reconstruction errors than those of TDO and not to have any restriction on selecting its gains, thereby solving the problems. Through performance comparison by transfer function and simulation, we validate the analysis results of two observers (TDO and ETDO) and evaluate the performances. Finally, through experiments on BLDC motor system, the analysis results are clearly conformed.

• 대한전기학회논문지
• /
• 제34권2호
• /
• pp.63-71
• /
• 1985

The existing methods of pole assignment were reserved in this paper, a digital control method for MIMO dynamic systems was developed based on pole assignment using I/O delay. The underlined concept of the derived control law was that the poles corresponding to the order of a system can be assigned on the desired positions via output delay, and the poles of the order incrememted by output delay were forced to be placed on zero positions by way of input delay when applied to an actual MIMO system, the present scheme was shown to be more effective than the conventional state feedback scheme with observer in that the former was simpler than the latter, while they performed well.

• 제어로봇시스템학회논문지
• /
• 제20권3호
• /
• pp.289-297
• /
• 2014

This article surveys the control theoretic study on time delay systems. Since time delay systems are infinite dimensional, there are not analytic but numerical solutions on almost analysis and synthesis problems, which implies that there are a tremendous number of approximated solutions. To show how to find such solutions, several results are summarized in terms of two different axes: 1) theoretic tools like integral inequality associated with the derivative of delay terms, Jensen inequality, lower bound lemma for reciprocal convexity, and Wirtinger-based inequality and 2) various candidates for Laypunov-Krasovskii functionals.

• International Journal of Control, Automation, and Systems
• /
• 제5권2호
• /
• pp.170-183
• /
• 2007

This paper presents a delay-dependent approach to robust filtering for linear parameter-varying (LPV) systems with discrete and distributed time-invariant delays in the states and outputs. It is assumed that the state-space matrices affinely depend on parameters that are measurable in real-time. Some new parameter-dependent delay-dependent stability conditions are established in terms of linear matrix inequalities (LMIs) such that the filtering process remains asymptotically stable and satisfies a prescribed $H_{\infty}$ performance level. Using polynomially parameter-dependent quadratic (PPDQ) functions and some Lagrange multiplier matrices, we establish the parameter-independent delay-dependent conditions with high precision under which the desired robust $H_{\infty}$ filters exist and derive the explicit expression of these filters. A numerical example is provided to demonstrate the validity of the proposed design approach.

• 제어로봇시스템학회논문지
• /
• 제9권8호
• /
• pp.600-609
• /
• 2003

A hybrid stabilization approach involving both Passivity Observer/passivity Controller and wave variables is addressed to stabilize the teleoperation system with time delay. To guarantee the stability of master or slave side, Passivity Observer and Passivity Controller are applied. But Passivity Observer and Passivity Controller technique cannot deal with communication delay and even small communication delay cause the system to be unstable. To cope with this problem, wave variables are additionally employed to have robustness to arbitrary delays. To show the validity of our proposed approach, several computer simulation results are illustrated.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권5호
• /
• pp.601-606
• /
• 1999

A Walsh function method is proposed in this report for the analysis and optimal control of linear time-delay systems, which is based on the Picard's iterative approximation and fast Walsh transformation. In this research, the following results are obtained: 1) The differential and integral equation can be solved by transforming into a simple algebraic equation as it was possible with the usual orthogonal function method: 2) General orthogonal function methods require usage of Walsh operational matrices for delay or advance and many calculations of inverse matrices, which are not necessary in this method. Thus, the control problems of linear time-delay systems can be solved much faster and readily.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권1호
• /
• pp.54-63
• /
• 2016

A novel attitude tacking control method using Time Delay Control (TDC) scheme is developed to provide robust controllability of a rigid hexacopter in case of single or multiple rotor faults. When the TDC scheme is developed, the rotor faults such as the abrupt and/or incipient rotor faults are considered as model uncertainties. The kinematics, modeling of rigid dynamics of hexacopter, and design of stability and controllability augmentation system (SCAS) are addressed rigorously in this paper. In order to compare the developed control scheme to a conventional control method, a nonlinear numerical simulation has been performed and the attitude tracking performance has been compared between the two methods considering the single and multiple rotor faults cases. The developed control scheme shows superior stability and robust controllability of a hexacopter that is subjected to one or multiple rotor faults and external disturbance, i.e., wind shear, gust, and turbulence.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.468-472
• /
• 2004

In this paper a VLSI design for the automatic magnetizing system has been presented. This is the design of a peripheral controller, which magnetizes CRTs and computers monitors and controls the automatic inspection system. We implemented a programmable peripheral interface(PPI) circuit of the control and protocol module for the magnetizer controller by using a O.8um CMOS SOG(Sea of Gate) technology of ETRI. Most of the PPI functions has been confirmed. In the conventional method, the propagation/ramp delay model was used to predict the delay of cells, but used to model on only a single cell. Later, a modified "apos;Linear delay predict model"apos; was suggested in the LODECAP(LOgic Design Capture) by adding some factors to the prior model. But this has not a full model on the delay chain. In this paper a new "apos;delay predict equationapos;" for the design of the timing control block in PPI system has been suggested. We have described the detail method on a design of delay chain block according to the extracted equation and applied this method to the timing control block design.