• Applied Microscopy
• /
• 제45권4호
• /
• pp.230-235
• /
• 2015

Crystallographic models are effective tools to interpret, calculate and even to predict the preferred crystallographic morphologies of precipitates in various precipitation systems. The present study gives an introduction on the recently developed secondary constrained coincident site lattice (II-CCSL) model. Using the II-CCSL model, the interface matching condition of the ${\beta}-Mg_{17}Al_{12}$ precipitates with ${\alpha}-Mg$ matrix in an aged AZ91 alloy has been analyzed to rationalize the morphologies of the precipitates. The results show that the characteristic crystallographic features of the observed ${\beta}-Mg_{17}Al_{12}$ precipitates, i.e., the habit plane of the ${\beta}-Mg_{17}Al_{12}$ lath with a Burgers orientation relationship (OR) and the growth direction of the ${\beta}-Mg_{17}Al_{12}$ with a Crawley OR exhibit a better lattice matching degree than their vicinal orientations. Moreover, the Crawley OR is preferred to the Burgers OR due to a better lattice match.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 D
• /
• pp.697-699
• /
• 2000

In this paper, an extension of model predictive controller for nonlinear process using Takagi-Sugeno(TS) fuzzy model is proposed Since the consequent parts of TS fuzzy model comprise linear equations of input and output variables. it is locally linear, and the Generalized Predictive Control(GPC) technique which has been developed to control Linear Time Invariant(LTI) plants, can be extended as a parallel distributed controller. Also fuzzy soft constraints are introduced to handle both equality and inequality constraints in a unified form. So the traditional constrained GPC can be transferred to a standard fuzzy optimization problem. The proposed method conciliates the advantages of the fuzzy modeling with the advantages of the constrained predictive control, and the degree of freedom is increased in specifying the desired process behavior.

• 한국컴퓨터산업학회논문지
• /
• 제10권5호
• /
• pp.201-206
• /
• 2009

시간표 문제는 제약조건을 만족하는 최적화 문제이다. 대부분의 최적화 알고리즘은 일단 시간표를 생성하고 이를 반복적으로 변형하고 재구성하는 전략을 통해 최적에 도달하는 방법을 이용하고 있다. 시간표 문제는 자원이 부족한 경우에 초기해를 만드는 과정에서부터 어려움을 겪게 된다. 초기해를 만들기 위한 대표적인 방법은 높은 제약조건을 갖는 과목 먼저 배정하는 것이다. 여기서 제약 조건의 정도를 수치화 한 것을 자유도라고 한다. 본 연구에서는 이 자유도를 정의하고 실험을 통해 자유도의 역할을 살펴보고자 한다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제15권1호
• /
• pp.1-7
• /
• 2023

TCP is considered a major candidate transport protocol even for constrained IoT networks due to its ability to integrate into the existing network infrastructures. Since TCP implementations such as uIP TCP often allow only a single TCP segment per connection to be unacknowledged at any given time due to resource constraints, the congestion control relies only on RTO management. In our previous work, to address the problem that uIP TCP performs poorly particularly when a radio duty cycling mechanism is enabled and the hidden terminal problem is severe, we proposed a RTO scheme for uIP TCP and validated the performance through Cooja simulation. In this study, we investigate the effect of other factors that were not considered in our previous work. More specifically, the effect of traffic intensity, the degree of the hidden terminal problem, and RDC is investigated by varying the offered load and the transmission range, and the RDC channel check rate. Simulation results imply that we need to further investigate how to improve TCP performance when the radio duty cycling mechanism is used.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.366-371
• /
• 1993

This paper gives a convenient parameterization for the clas of all stabilizing controllers in the presence of plant perturbation. The perturbations are constrained in such class as plants are stabilizable by a nominal controller. By using the controller stabilizing a given plant with perturbation, we can obtain a parametrization of all stable closed-loop transfer functions, which are affine in the free parameter of the controller. It is easy to extend the controller to the case of a two-degree-of-freedom controller.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제6권3호
• /
• pp.232-239
• /
• 2006

This paper is for applying interactive fuzzy linear programming for the problem of product mix planning, which is one of the aggregate planning problem. We developed a modified algorithm, which has two-phase approach for interactive fuzzy linear programming to get a better solution. Adding two-phase method, we expect to obtain not only the highest membership degree, but also a better utilization of each constrained resource.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.163-170
• /
• 2001

Axle Gearbox of the High Speed Train has rotational degree of freedom centered on the Axle Shaft Center Line, and constrained by the Reaction Arm connected to the Bogie Frame via Resilient Ring made of Rubber. This System is laid on the Power Train and can influence on the Power transmitted from Motor to Axle. The stiffeness of the Resilient Ring have to be selected for the Natural Frequency of this System do not overlap with the Teeth-mating Frequency. To confirm the Design Parameters, Calculation and Experiment were executed and compared.

• 산업경영시스템학회지
• /
• 제23권61호
• /
• pp.33-39
• /
• 2000

In this paper, we present an algorithm for the multicast routing problem when there exit the cell replication limits of ATM switching nodes. This problem can be formulated as a Degree Constrained Minimum Steiner Tree Problem(DCSP). The proposed algorithm is a modification of the shortest path heuristic originally devised for minimum Steiner tree problem. From the experimental results, it can be seen that our algorithm is efficient to obtain a near optimal solution with comparatively low computational time.

• 대한수학회지
• /
• 제49권1호
• /
• pp.99-112
• /
• 2012

This paper attempts to present a numerical method for solving optimal control problems. The method is based upon constructing the n-th degree Jacobi polynomials to approximate the control vector and use differentiation matrix to approximate derivative term in the state system. The system dynamics are then converted into system of algebraic equations and hence the optimal control problem is reduced to constrained optimization problem. Numerical examples illustrate the robustness, accuracy and efficiency of the proposed method.

• Journal of applied mathematics & informatics
• /
• 제17권1_2_3호
• /
• pp.121-144
• /
• 2005

In this paper, we propose unconstrained and constrained posynomial Geometric Programming (GP) problem with negative or positive integral degree of difficulty. Conventional GP approach has been modified to solve some special type of GP problems. In specific case, when the degree of difficulty is negative, the normality and the orthogonality conditions of the dual program give a system of linear equations. No general solution vector exists for this system of linear equations. But an approximate solution can be determined by the least square and also max-min method. Here, modified form of geometric programming method has been demonstrated and for that purpose necessary theorems have been derived. Finally, these are illustrated by numerical examples and applications.