• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.2
• /
• pp.83-93
• /
• 2003

This study was conducted for an understanding of a threatened plant species,“Penthorum chinense”, which is a vegetation structure and environmental characteristic in the southern part of Ibaraki, Japan. We selected distribution and contiguity area where P. chinense is not distributed and we set up 69 sites by the quardrat method. The surveyed general characters in each site include mean-height, mean-coverage, moisture condition water depth coverage and depth of litter layer. We calculated the degree of succession by the survey data and grasped the main distribution area, vegetation structure, growth environment of P. chinense by TWINSPAN classification and DCA ordination. The results of this study are as follows. First, P. chinense habitat was categorized into the riverside and abandoned paddy fields. The riverside was influenced by natural disturbance caused by flooding and drought. These conditions led to a poor P. chinense growth. The abandoned paddy fields as the artificial disturbance area have high potential value, because the area can preserve P. chinense growth space by succession control and water management. second, we executed TWINSPAN analysis based on vegetation coverage data of survey sites. The vegetation types were classified into the three categories: annual plant flora(P. chinense dominates in wet state), perennial plant flora(Solidago altissima dominates in dry state), and perennial plant flora(Phragmites communis dominates in wet state). Third, the data was ordinated by DCA. The sample sequences along the first and second DCA axes effectively reflected moisture condition, number of species, mean height, coverage of litter layer and degree of succession. Especially, P. chinense flora has the high correlation with moisture condition and number of species.

• Physical Therapy Korea
• /
• v.25 no.4
• /
• pp.1-8
• /
• 2018

Background: Round shoulder posture, results from excessive flexed posture of the thorax, is defined as a position of scapular protraction, anterior tipping, and downward rotation. However, previous studies have focused on only passive position of the thorax during scapular posterior tilting (SPT) and have not reported on SPT combined with correction of flexed posture. Objects: The aim of this study was to compare effects of SPT and SPT with prone trunk extension (SPT + PTE) on activities of the lower trapezius, serratus anterior, and thoracic erector spinae and degree of posture in subjects with round shoulder and flexed posture. Methods: Fifteen subjects with round shoulder and flexed posture were recruited. The caliper was used to measure the degree of round shoulder and flexed posture. Electromyography was performed to collect data of muscle activities. Paired t-test was used to compare two exercise (${\alpha}=.05$). Results: When SPT + PTE was applied, the degree of round shoulder posture (p=.001) and flexed posture (p=.039) significantly decreased compared with that when SPT was applied. The lower trapezius activity significantly increased in the SPT + PTE condition compared with that in the SPT condition (p=.026). There were no significant differences in serratus anterior activity between SPT + PTE and SPT. The thoracic erector spinae activity significantly increased in the SPT + PTE condition compared with that in the SPT condition (p=.014). Conclusion: SPT + PTE might be one of the effective methods to enhance activities of lower trapezius and thoracic erector spinae, and to reduce round shoulder posture and flexed posture in subjects with round shoulder and flexed posture.

• Composites Research
• /
• v.26 no.6
• /
• pp.337-342
• /
• 2013

The good dispersion of nano-materials in epoxy matrix was important parameter for the reinforcement effect, and the evaluation of dispersion degree was to prove it. This work was studied to predict the dispersion condition of nano-SiC powders in SiC/epoxy composites using capacitance measurement. Capacitance was defined to be the electric capacity in proportional to electron charge of the measuring section. In case of nano-SiC powders, the electron charge of SiC/epoxy composites was higher than that of neat epoxy resin. Capacitance was evaluated for each section of SiC/epoxy composites. The prediction of dispersion condition was verified by using capacitance measurement. Dispersion condition of nano-SiC powders in epoxy matrix was evaluated with two different dispersion methods, i.e., sonication and stirring methods. The dispersion degree was also verified with the tensile strength correlating to capacitance.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.1219-1224
• /
• 2001

In this study, concrete what plenty of fly ash used as binder is left in three condition humid condition($35^{\circ}C$), normal condition($20^{\circ}C$) and cold condition($5^{\circ}C$). Fly ash concrete is tested in fresh properties and early strength. The result of tests could give the decisive factor of form side's stripping time. The purpose of this study is presenting the stripping time data to help the construction work. The result of this study is below. 1. The plain concrete specimen in humid condition developed high strength before 5 days, then strength development is declined. 10 day strength of plain specimen is smaller than the normal condition specimen's. 2. The strength of the concrete which plenty of fly ash used is more developed than the concrete in normal condition. It says that fly ash concrete is useful in the humid condition. 3. As fly ash substitution rate is downsizing and outdoor temperature degree is low, form stripping times is getting shorter.

• Journal of Korean Home Economics Education Association
• /
• v.14 no.3
• /
• pp.37-49
• /
• 2002

The Purpose of this research is to investigate utilization and recognition about neighborhood leisure facilities of middle school students. The data were collected through the questionnaire from 532 second grade students of 6 middle schools at Yeon-su Gu. Nam-dong Gu, and Suh Gu in In-chon. Results of the study are as follows; 1) They were most likely to use the consumptive and commercial entertainment-association facilities. There was no difference in the total number of frequencies of using facilities among the three areas. The students were more likely to use the leisure facilities whatever available for them easily to access. 2) All the using degree, sufficient degree and satisfactory degree of the leisure facilities were below the middle Point. The degree of using facilities by the student was insignificantly different among three areas but the sufficient and satisfactory degrees were varied. The regression result showed that the use of Public facilities as well as culture or sports facilities significantly increased sufficient and satisfaction degrees This research suggests to offer inexpensive leisure facilities of culture and sports in district residential area so as to access easily and to offer facilities for girls' students to activate using leisure facilities.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.7
• /
• pp.179-184
• /
• 2004

In this work, a copper-clad aluminum composite was fabricated using hot hydrostatic extrusion with various extrusion ratios (8.5, 19, 49) and semi-die angles (30, 45, 60 degree) at a temperature of 32$0^{\circ}C$, Material characteristics of copper-clad aluminum composites were determined from compression tests and hardness tests The results showed that for ER of 8.5, the optimum semi-die angle was below or equal to 30 degree and a pressure drop was about 31%. For ER of 19, the optimum semi-die angle was in the range of 40 to 50 degree and a pressure drop was about 38%. In the case of ER=49, the optimum semi-die angle was above or equal to 60 degree and a pressure drop was about 36%. Compressive yield strength was maximum for ER of 8.5 and semi-die angle of 30 degree and the value of maximum was 155 MPa. Uniform hardness distribution was obtained as the extrusion ratio increases and the semi-die angle decreases. In the case of ER=8.5 and semi-die angle of 30 degree, the lowest extrusion pressure and the maximum compressive yield strength was obtained. Therefor, it was concluded that the optimum extrusion condition for fabricated copper-clad aluminum composites under hydrostatic pressure environment was ER of 19 and semi-die angle of 30 degree.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.13 no.1
• /
• pp.45-51
• /
• 2002

The purpose of this study is to examine the effects of vowel type on the nasalance score. Twenty one male adults without VPI produced 5 types of vowels (/a/, /e/, /i/, /o/, /u/) in two conditions-normal and simulated VPI condition. Nasalance scores were measured for each vowel. These data were compared between conditions and among vowel types. The results were as follow : For all vowels, nasalance scores were significantly higher in simulated VPI condition than in normal condition. The two conditions yielded different patterns in terms of the degree of nasalance across the 5 vowels. In normal condition, nasalance scores were higher in front vowels than in medial or back vowels. But in simulated VPI condition, nasalance scores were higher in high vowels than in mid or low vowels.

• The Mathematical Education
• /
• v.48 no.3
• /
• pp.287-302
• /
• 2009

This study investigated how 5th grade students found and understood triangle congruence conditions (SSS, SAS, ASA). In particular, this study focused on children's processes of discovering triangle congruence conditions and the obstacles which they encountered in the process of making sense of these conditions. Our data indicates that inquiring the cases in which less than three factors of triangle are given is helpful for children to guess triangle congruence conditions and understand the minimal characteristic of these conditions. And the degree of difficulty of discovering each congruence condition is different. Children discovered SAS condition and ASA condition easily, but it was hard for them to discover and understand that SSS was also a triangle congruence condition because they connected the length of a given side with the use of a scaled ruler not a compass.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.5
• /
• pp.1-11
• /
• 2000

The aim of this study is to suggest guidelines of bicycle lanes in terms of landscape architecture with special reference to Kyongju. The research is mainly based on landscape satisfaction factors analysis regarding 16 variables and 10 slide photos of bicycles lanes. The 43 students of Landscape Department in Kyungpook National University were selected for the research. The major research findings are as follows; 1. Satisfaction degree of 16 variables are assessed in terms of semantic differential scale. The assess group is generally satisfied with variables concerning bicycle lane environment such as $\ulcorner$inclination of the lane (5.2)$\lrcorner$and $\ulcorner$road pavement conditions (5.1)$\lrcorner$. But the group expresses rather low satisfaction degree on the variables related lanes' surrounding landscape such as $\ulcorner$visual variety (3.9)$\lrcorner$, spacious resting place (3.7)$\lrcorner$ and $\ulcorner$variety of facilities (3.1)$\lrcorner$. 2. The level of satisfaction degree regarding 16 variables and 10 photos shows that the male gives relatively higher satisfaction degree than the female group. But there is no statistical significance between the group regarding satisfaction degree of each variable and photo except 4 variables and 2 photos. 3. The assess group gives the highest satisfaction degree on the$\ulcorner$no. 10 slide (6.5)$\lrcorner$ and the lowest on the $\ulcorner$no. 7 slide (2.7)$\lrcorner$. The two photo shows variables of more than 4 points difference of satisfaction degree, such as $\ulcorner$good looking planting threes (4.8)$\lrcorner$, $\ulcorner$enough shadows (4.8)$\lrcorner$ and $\ulcorner$comfortable atmosphere(4.1)$\lrcorner$. 4. $\ulcorner$Aesthetic and amenity factor$\lrcorner$, $\ulcorner$use condition factors$\lrcorner$, $\ulcorner$ike lane environment factors$\lrcorner$, and $\ulcorner$inclination and open view factors$\lrcorner$are the main four factors influencing landscape satisfaction of bicycle lane. Regression model using factor scores for landscape satisfaction degree of bike lane is S(Satisfaction degree)=4.526+1.099(aesthetic and amenity factor)+0.720(use condition factors)+0.486(bike lane environment factors)+0.048(inclination and open view factors($R^2$=0.811).

• Journal of the Korea Concrete Institute
• /
• v.14 no.1
• /
• pp.118-125
• /
• 2002

Hydration is the main reason for the growth of the material properties. An exact parameter to control the chemical and physical process is not the time, but the degree of hydration. Therefore, it is reasonable that development of all material properties and the formation of microstructure should be formulated in terms of degree of hydration. Mathematical formulation of degree of hydration is based on combination of reaction rate functions. The effect of moisture conditions as well as temperature on the rate of reaction is considered in the degree of hydration model. This effect is subdivided into two contributions: water shortage and water distribution. The former is associated with the effect of W/C ratio on the progress of hydration. The water needed for progress of hydration do not exist and there is not enough space for the reaction products to form. The tatter is associated with the effect of free capillary water distribution in the pore system. Physically absorption layer does not contribute to progress of hydration and only free water is available for further hydration. In this study, the effects of chemical composition of cement, W/C ratio, temperature, and moisture conditions on the degree of hydration are considered. Parameters that can be used to indicate or approximate the real degree of hydration are liberated heat of hydration, amount of chemically bound water, and chemical shrinkage, etc. Thus, the degree of heat liberation and adiabatic temperature rise could be determined by prediction of degree of hydration.