• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2007.11a
• /
• pp.21-33
• /
• 2007

CPAM has been applied to the paper industry for the purpose of wet-end improvement for a long time. And molecular weight and charge density have been managed most important quality factors to make CPAM for this application. Recently branched CPAM was developed to improve retention and drainage characteristics and we considered branch degree of CPAM as important factor as molecular weight and charge density. In this experiment, we tried to investigate physical and chemical properties to determine branch degree and flocculation efficiency using Arbocell pulp which was recently developed micro size pulp and finally we applied retention and drainage test under the ONP stock condition.

• Journal of Power System Engineering
• /
• v.4 no.1
• /
• pp.68-73
• /
• 2000

A mixed degree finite element solutions using hierarchical elements are investigated for convergences on a 2-D simple cases. Elements are generated block by block and each block is assigned an arbitrary solution degree. The numerical study showed that a well constructed blocks can increase the convergence and accuracy of finite element solutions. Also, it has been found that for higher order elements, the convergence trends can be deteriorated for smaller mesh sizes. A procedure for a variable fixed boundary condition has been included.

• Bulletin of the Korean Mathematical Society
• /
• v.46 no.1
• /
• pp.183-198
• /
• 2009

In this paper, we derive a characterization of orthonormal balanced multiwavelets of order p in terms of the continuous moments of the multiscaling function $\phi$. As a result, the continuous moments satisfy the discrete polynomial preserving properties of order p (or degree p - 1) for orthonormal balanced multiwavelets. We derive polynomial reproduction formula of degree p - 1 in terms of continuous moments for orthonormal balanced multiwavelets of order p. Balancing of order p implies that the series of scaling functions with the discrete-time monomials as expansion coefficients is a polynomial of degree p - 1. We derive an algorithm for computing the polynomial of degree p - 1.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2004.12a
• /
• pp.12-14
• /
• 2004

Objective to know about pollution of ventilated system in super market and hotel's air condition in Kunming. Methods to take out 28 ventilated system from super markets and hotels in Kunming in march 2004. To check dirt amount in pipelines and microorganism in dirt. Testing result is appraised under 'Public hygiene standard of ventilated system in air condition'. Results pollution problem exist in different degree in all the super markets and hotels that have been investigated. There is 32.14% which means 8 hotels and 1 super market, pollution is serious, The others (67.86%) is medium. Conclusion pollution problems exist in air condition system in all super markets and hotels of Kunming. Discussion aim at Kunming's special weather, and present condition of public ventilated system, discussing ways of management in hygiene of air condition system.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1506-1512
• /
• 2010

In this study, model tests were performed to investigate the settlement characteristics of the rock/soil mixture subgrade with the many portion of mudstone due to the cyclic train loading in high-speed railway. Specially, from the tests varying initial degree of saturation, effects of increment of the degree of saturation in the subgrade due to rainfall or elevation of ground water table under cyclic train loading on the deformation characteristics were analyzed. From the results, in the low degree of saturation, settlement converged to some value. However, in the condition of degree of saturation larger than some value, settlement rapidly increased. Therefore, it was found that it is important to maintain the degree of saturation of subgrade below the specific level to prevent the settlement of subgrade.

• Textile Coloration and Finishing
• /
• v.16 no.1
• /
• pp.34-39
• /
• 2004

Dyeing properties of Glycyrrhizae Radix was investigated with silk fabrics. Dyeing water is a type of chalcone, it showed yellow in IR spectrum. K/S value showed high in following conditions; Glycyrrhizae Radix $200g/1\ell4 water, $80^{\circ}$ of dyeing temperature, 90 minute of dyeing time. Glycyrrhizae Radix dyeing water has higher K/S value in alkalinity(pH9) than in neutrality(pH7) or acidity(pH3) conditions. K/S value showed highest in pH5 premordant method of alkalinity dyeing water condition. The color of silk fabric dyed with Glycyrrhizae Radix is yellow. The change of color did not show by mordant treatment. K/S value showed higher in mordant treatment than nonmordant. Light fastness showed over 3 degree in nonmordant, premordant, simmordant(Al,Cu,Fe) and postmordant(Cu). Water fastness showed over 3 degree in dyeing water(pH3, pH5, pH7). Dry cleaning fastness showed over 3 degree in all dyeing methods. Washing fastness is showed in 2-3 degree; Al in nonmordant, premordant, simmordant and Cu in simmordant are 2-3 degree. Perspiration fastness is nearly 3-4 degree in premordant and simmordant. Perspiration fastness shows high in premordant, simmordant than postmordant. The fastness of light, water, dry cleaning, washing, perspiration shows better nonmordant, premordant, simmordant than postmordant method.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.501-504
• /
• 2004

This paper proposes degree of hydration based shrinkage prediction model of 40MPa HPC. This model shows degree of hydration which is defined as the ratio between the hydrated cement mass and the initial mass of cement is very closely related to shrinkage deformation. In this study, degree of hydration was determined by CEMHYD-3D program of NIST. Verification of the predicted degree of hydration is performed by comparison between test results of compressive strength and estimated one by CEMHYD-3D. Proposed model is determined by statistical nonlinear analysis using the program Origin of Origin Lab. Co. To get coefficients of the model, drying shrinkage tests of four specimen series were followed with basic material tests. Testes were performed in constant temperature /humidity chamber, with difference moisture curing ages to know initial curing time effect. Verification with another specimen, collected construction field of FCM bridge, was given in the same condition as pre-tested specimens. Finally, all test results were compared to propose degree of hydration based model and other code models; AASHTO, ACI, CEB-FIP, JSCE, etc.

• Journal of the Korean Society of School Health
• /
• v.6 no.2
• /
• pp.69-75
• /
• 1993

The questionaire survey in this study was obtained from 1256 upper elementary children in a certain elementary school in In-Cheon city from May 1 to May 31 1993. The purpose of this study was to promote an understanding on the Actual condition of oral health management and to plan a desirable solution for oral health program by surveying the current status of oarl health management. The survey was carried out by using the questionaire after being modified and complemented which was used for the survey of the study on the actual condition of oral health management by Sin Seon Hang (1989). The major results are summarized as follows: 1. General tooth brushing of respondents. 1) As for frequency, 2 times it day is highest. 2) After breakfast meal and below 3 minutes is high. 3) Respondents brushed only teeth with the direction of up and down, left and right side. 4) The period of using for one tooth brush is from 4 months to 6 months. 2. The degree of recognition on oral health knowledge is low. 3. 1) The degree of dental examine's experience with scaling experience are 26.83%. 2) Respondents who experience dental treatment are 57.88%. 3) In oral disease, dental caries is highest. 4) Great difficulty of going to the dentists' is psychological thread and next is lack of time.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.75-81
• /
• 2006

Recently, customers interest about noise of household electric appliance is growing. so, designer of product must study to reduce noise of product. Specially, in case of household electric appliance such as washing machine, there was consumers' complaint about noise that is radiated under dehydrating condition. But, in the case of washing machine, identification of noise source is not easy when washing machine is under dehydrating condition. Because various noise source influence each other, it is difficult to find out pure contribution degree about output noise. Multi-Dimensional Spectral Analysis(MDSA) is method that can remove correlation between inputs each other and express pure contribution degree about output of single input. So in this study, we analyzed contribution of each noise source on transfer pass of noise that is radiated at dehydration of washing machine using MDSA.

• Journal of Korea Game Society
• /
• v.10 no.6
• /
• pp.57-65
• /
• 2010

In this paper, mobility performance indices are proposed which may be used to estimate characteristics of output velocity space in six-degree-of-freedom parallel mechanism. In order for manipulability and condition number to not suffer from lack of the physical meaning due to dimensional inhomogeneity, output space is partitioned into translational velocity space and rotational velocity space, respectively. In each space, mobility ellipsoids corresponding to unit input space are defined and two types of mobility performance in translational velocity spaces indices are derived. Two types of mobility performance in rotational velocity spaces indices are derived.