• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.104-113
• /
• 1992

The hydrodynamic problem is treated here when a pressurized bag is submerged partially into water and the end points of it oscillate. SES(Surface Effect Ship)has a bag filled with pressurized air at the stern in order to prevent the air leakage, and the pitch motion of SES is largely affected by the hydrodynamic force of the bag. The shape of a bag can be determined with the pressure difference between inside and outside. Once the hydrodynamic pressure is given, the shape of a bag can be obtained, however in order to calculate the hydrodynamic pressure we should know the shape change of the bag, and vice versa. Therefore the type of boundary condition on the surface of a bag is a moving boundary like a free surface boundary. In this paper, the formulation of this problem was done and linearized. The calculation scheme for the radiation problem of an oscillating bag is shown in comparison with the case that the bag is treated as rigid body. The hydrodynamic forces are calculated for various values of the pressure inside the bag and the submerged depth.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.3
• /
• pp.405-411
• /
• 2020

Recently, studies on underwater communication, related to the development of underwater resources, disaster monitoring and defense, have been actively carried out. In the design of wireless communication systems, path loss is the most important information to derive a link budget that is required to guarantee communication reliability by calculating received power level for the given communication link. The underwater acoustic channel have different characteristics according to geographical location and relevant environmental factors such as water temperature, depth, wave height, algae, and turbidity. Subsequently, many research institutes aiming to develop underwater acoustic communication systems are researching actively on the underwater acoustic channels in various sea areas. In Korea, however, studies on the path loss of the acoustic channel are still insufficient. Therefore, in this study, the path loss of the acoustic channel are studied based on measurement data of the at-sea experiment conducted at Geohae-do, southern sea of Korea.

• The Korean Journal of Air & Space Law and Policy
• /
• v.32 no.1
• /
• pp.287-325
• /
• 2017

Considering the development of aerospace, military science and technology since the 20th century, the sky is very important for the nation's existence and prosperity. The proverb "Whosoever commands the space commands the world itself!" emphasizes the need for the command of the air. This essay is the first study on the status of airspace after reunification. First, the territorial airspace is over the territory and territorial sea, and its horizontal extent is determined by the territorial boundary lines. Acceptance of the present order is most reasonable, rather than attempting to reconfigure through historical truths about border issues, and it could be supported by neighboring countries in the reunification period. For peace in Northeast Asia, the reunified Korea needs to respect the existing border agreement between North Korea and China or Russia. However, the North Korean straight baselines established in the East Sea and the Yellow Sea should be discarded because they are not available under United Nations Convention on the Law of the Sea. It is desirable for the reunified Korea to redefine the straight baselines that comply with international law and determine the territorial waters up to and including the 12-nautical mile outside it. Second, the Flight Information Region (hereinafter "FIR") is a region defined by the International Civil Aviation Organization (hereinafter "ICAO") in order to provide information necessary for the safe and efficient flight of aircraft and the search and rescue of aircraft. At present, Korea is divided into Incheon FIR which is under the jurisdiction of South Korea and Pyongyang FIR which is under the jurisdiction of North Korea. If North Korea can not temporarily exercise control of Pyongyang FIR due to a sudden change of circumstances, it is desirable for South Korea to exercise control of Pyongyang FIR, and if it is unavoidable, ICAO should temporarily exercise it. In reunified Korea, it is desirable to abolish Pyongyang FIR and integrate it into Incheon FIR with the approval of ICAO, considering systematic management and control of FIR, establishment of route, and efficiency of management. Third, the Air Defense Identification Zone (hereinafter "ADIZ") is a zone that requires easy identification, positioning, and control of aircraft for national security purposes, and is set up unilaterally by the country concerned. The US unilaterally established the Korea Air Defense Identification Area (KADIZ) by the Declaration of Commitment on March 22, 1951. The Ministry of Defense proclaimed a new KADIZ which extended to the area including IEODO on December 13, 2013. At present, North Korea's military warning zone is set only at maritime boundaries such as the East Sea and the Yellow Sea. But in view of its lack of function as ADIZ in relations with China and Russia, the reunified Korea has no obligation to succeed it. Since the depth of the Korean peninsula is short, it is necessary to set ADIZ boundary on the outskirts of the territorial airspace to achieve the original purpose of ADIZ. Therefore, KADIZ of the reunified Korea should be newly established by the boundary line that coincides with the Incheon FIR of the reunified Korea. However, if there is no buffer zone overlapping with or adjacent to the ADIZs of neighboring countries, military tensions may rise. Therefore, through bilateral negotiations for peace in Northeast Asia, a buffer zone is established between adjacent ADIZs.

• Journal of the Society of Disaster Information
• /
• v.19 no.2
• /
• pp.395-410
• /
• 2023

Purpose: The purpose of this study was to analyze the current state of drone terrorism response at such critical national facilities and derive improvements, especially to identify problems in laws and systems to effectively utilize the anti-drone system and present directions for improvement. Method: A qualitative research method was used for this study by analyzing a variety of issues not discussed in existing research papers and policy documents through in-depth interviews with subject matter experts. In-depth interviews were conducted based on 12 semi-structured interviews by selecting 16 experts in the field of anti-drone and terrorism in Korea. The interview contents were recorded with the prior consent of the study participants, transcribed back to the Korean file, and problems and improvement measures were derived through coding. For this, the threats and types were analyzed based on the cases of drone terrorism occurring abroad and measures to establish anti-drone system were researched from the perspective of laws and systems by evaluating the possibility of drone terrorism in the Republic of Korea. Result: As a result of the study, improvements to some of the problems that need to be preceded in order to effectively respond to drone terrorism at critical national facilities in the Republic of Korea, have been identified. First, terminologies related to critical national facilities and drone terrorism should be clearly defined and reflected in the Integrated Defense Act and the Terrorism Prevention Act. Second, the current concept of protection of critical national facilities should evolve from the current ground-oriented protection to a three-dimensional protection concept that considers air threats and the Integrated Defense Act should reflect a plan to effectively install the anti-drone system that can materialize the concept. Third, a special law against flying over critical national facilities should be enacted. To this end, legislation should be enacted to expand designated facilities subject to flight restrictions while minimizing the range of no fly zone, but the law should be revised so that the two wings of "drone industry development" and "protection of critical national facilities" can develop in a balanced manner. Fourth, illegal flight response system and related systems should be improved and reestablished. For example, it is necessary to prepare a unified manual for general matters, but thorough preparation should be made by customizing it according to the characteristics of each facility, expanding professional manpower, and enhancing response training. Conclusion: The focus of this study is to present directions for policy and technology development to establish an anti-drone system that can effectively respond to drone terrorism and illegal drones at critical national facilities going forward.

• Fire Science and Engineering
• /
• v.26 no.6
• /
• pp.38-44
• /
• 2012

The purpose of fire protection for the nuclear power plants (NPPs) is to ensure safe shutdown state of the reactor, to minimize the release of radioactive materials to the environment, to provide physical safety of the on-site personnel, and to limit the property damage. Fire protection and extinguishing equipments are one of the important protection measures based on the defense-in-depth concept, which can promptly detect and control and extinguish those fires that do occur, thereby limiting fire damage. However, a separate evaluation process might be additionally necessary for the construction permit and operating license because the fire protection laws of the NEMA for installation standards of the fire protection systems is not fully characterized for the NPPs. It is also not easy to implement the regulations such as the performance based design concept for fire protection system of the NPPs which are characterized for a relatively low density of employee. This study suggests a guideline for the improvement of the technical standards for fire protection systems of the NPPs by evaluating the fundamental problems drawn by reviewing laws and regulatory guides relevant to fire protection and by evaluating the applicability of the KEPIC FPN in domestic nuclear power plants.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.174-180
• /
• 2015

In this paper, we propose the passive sonar signal processing technique for estimating target information using proximity sensor. This algorithm is performed by single sensor which is constituted underwater sensor network and has a hierarchical structure. The estimated parameter is the velocity, the depth, the distance and bearing at CPA situations and we can improve the accuracy of signal processing techniques through having a hierarchical structure. We verify the performance of the proposed method by computer simulation and then we check the result that 20% error can be occurred in maximum detectable range. We also confirm that proposed method has the reliability in the actual sea environment through the sea experiment.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.4
• /
• pp.335-344
• /
• 2014

The safety case program has been prepared for the development of the disposal facility of low- and intermediate-level radioactive waste in Korea. For the development of the radioactive waste disposal facility, this program can be applied for the safety demonstration of the facility and for the safety judgment of development step based on the international standards and domestic development environment. Systematic safety approach of this program includes the safety strategies such as optimization, robustness, demonstrability and defense-in-depth principle which are based on the safety principle and objectives. From the quality of assessment basis, safety arguments focused on the uncertainty management and the confidence building can assure the disposal safety during the step-wise safety assessment.

• Convergence Security Journal
• /
• v.6 no.4
• /
• pp.29-40
• /
• 2006

Recent trends for cyber threat such as worm and virus exploit vulnerabilities inherent to main information communication infrastructures like the internet to achieve economical and political goals. It needs to develop checking programs for new vulnerabilities published in prompt and apply them to vulnerable systems for the defense of those cyber threats. In this paper, we study of methodologies for new vulnerability checking module development proper to user level. First, we analyze current 7 methodologies for the development of new vulnerability checking modules including GFI LANGuard and Nessus and then compare them. Second, We define and propose the 5 unique methodologies for the development of new vulnerability checking modules in depth. Finally, we induct the best methodology proper to a certain user level by assessing each methodology according to conditions which is set virtually.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.3-12
• /
• 2016

This paper describes the development of the ground penetrating radar (GPR) system using UWB impulse radar with 48 Channel array. GPR is an effective alternative technology to resolve th disadvantages of metal detectors. Metal detectors have a very low detection probability of non-metallic landmine and high false alarm rates caused by metallic materials under the ground. In this paper, we use the mono-cycle pulse waveform with about 600 ps pulse width to obtain high resolution landmine microwave images. In order to analyze performances of this system, we utilize indoor test facility that made up of rough sandy loam which representative Korean soil. The mimic landmine models of metal/non-metal and anti-tank/anti-personnel landmines buried in DMZ (demilitarized zone) of Korea are used to analyze the detection depth and the shape of the mines using microwave image.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.12
• /
• pp.1063-1069
• /
• 2012

In present paper, we used magnesium alloy having a lower density and higher electrical conductivity for bipolar plate to reduce the weight of PEM fuel cell. The silver was coated to prevent corrosion and form passivation film on the metal surface with sputtering. In acid proof evaluation for setting optimal coating conditions, the homogeneity of coating thickness was improved by coating with the thickness of 3 ${\mu}m$ which not indicated any micro cracks and the temperature $180^{\circ}C$. The performance test and evaluation based on the clamping pressure and channel depth to determine the configuration of bipolar plate for assembling single cell was implemented. And then we assembled single cell with this bipolar plate and implemented the performance test to ensure and compare the current-voltage performance followed as several factors such as coating or non-coating, the change of clamping pressure, the change of channel depth, etc. As these results, the maximum power density of single cell with the coated bipolar plate was 192 $mW/cm^2$ and it was confirmed that the power density per unit mass was better than existing metal bipolar plate.