• Steel and Composite Structures
• /
• 제17권2호
• /
• pp.185-198
• /
• 2014

Carbon-manganese steel A42 (French standards) is used in steam generator pipes of nuclear center and subject to low cycle fatigue (LCF) loads. In order to obtain the material LCF behavior, the tests are implemented in a hydraulic fatigue machine. The LCF plastic deformation and cyclic stress in macroscope have been influenced by the accumulated low cycle fatigue damage. The constitutive kinematic and isotropic hardening modeling is modified with coupling fatigue damage to describe the fatigue behavior. The improved model seems to be good agreement with the test results.

• 대한산업공학회지
• /
• 제39권6호
• /
• pp.450-460
• /
• 2013

A complex system such as defense systems is in a form of System of Systems (SoS) in which each component is a system being independent of other component systems. Dynamical behavior of SoS is represented by a composition of behaviors of component systems. Thus, a M&S tool/environment would not be efficient for development of heterogeneous models nor for simulation in a centralized environment. Moreover, such an environment restricts reusability and composability. This paper presents an interoperation method for M&S of defense systems as SoS. The approach first develops component system models using tools, each specialized to M&S of each component system. It then interoperates such simulations together to simulate a whole system as SoS. HLA/RTI is employed for such interoperation, which is a DoD/IEEE standard to support interoperation. We will introduce a case study for interoperable simulation of defense systems, which consists of a wargame simulator and a communication simulator.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권11호
• /
• pp.5425-5448
• /
• 2018

Wireless sensor network has been widely used in Internet of Things (IoT) applications to support large and dense networks. As sensor nodes are usually tiny and provided with limited hardware resources, the existing multiple access methods, which involve high computational complexity to preserve the protocol performance, is not available under such a scenario. In this paper, we propose an intelligent Medium Access Control (MAC) protocol selection scheme based on machine learning in wireless sensor networks. We jointly consider the impact of inherent behavior and external environments to deal with the application limitation problem of the single type MAC protocol. This scheme can benefit from the combination of the competitive protocols and non-competitive protocols, and help the network nodes to select the MAC protocol that best suits the current network condition. Extensive simulation results validate our work, and it also proven that the accuracy of the proposed MAC protocol selection strategy is higher than the existing work.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권1호
• /
• pp.36-41
• /
• 2005

• 한국군사과학기술학회지
• /
• 제25권6호
• /
• pp.637-647
• /
• 2022

Since the concept of Manned-UnManned Teaming(MUM-T) and Unmanned Aircraft System(UAS) can efficiently respond to rapidly changing battle space, many studies are being conducted as key components of the mosaic warfare environment. In this paper, we propose a rule-based AI engagement model based on Basic Fighter Maneuver(BFM) capable of Within-Visual-Range(WVR) air-to-air combat and a simulation environment in which human pilots can participate. In order to develop a rule-based AI engagement model that can pilot a fighter with a 6-DOF dynamics model, tactical manuals and human pilot experience were configured as knowledge specifications and modeled as a behavior tree structure. Based on this, we improved the shortcomings of existing air combat models. The proposed model not only showed a 100 % winning rate in engagement with human pilots, but also visualized decision-making processes such as tactical situations and maneuvering behaviors in real time. We expect that the results of this research will serve as a basis for development of various AI-based engagement models and simulators for human pilot training and embedded software test platform for fighter.

• 한국분말재료학회지
• /
• 제21권4호
• /
• pp.277-285
• /
• 2014

The effects of processing parameters on the flow behavior and microstructures were investigated in hot compression of powder metallurgy (P/M) Ti-6Al-4V alloy. The alloy was fabricated by a blended elemental (B/E) approach and it exhibited lamellar ${\alpha}+{\beta}$ microstructure. The hot compression tests were performed in the range of temperature $800-1000^{\circ}C$ with $50^{\circ}C$ intervals, strain rate $10^{-4}-10s^{-1}$, and strain up to 0.5. At $800-950^{\circ}C$, continuous flow softening after a peak stress was observed with strain rates lower than $0.1s^{-1}$. At strain rates higher than $1s^{-1}$, rapid drop in flow stress with strain hardening or broad oscillations was recorded. The processing map of P/M Ti-6Al-4V was designed based on the compression test and revealed the peak efficiency at $850^{\circ}C$ and $0.001s^{-1}$. As the processing temperature increased, the volume fraction of ${\beta}$ phase was increased. In addition, below $950^{\circ}C$, the globularization of phase at the slower strain rate and kinking microstructures were found. Based on these data, the preferred working condition of the alloy may be in the range of $850-950^{\circ}C$ and strain rate of $0.001-0.01s^{-1}$.

• Composites Research
• /
• 제31권6호
• /
• pp.347-354
• /
• 2018

형상기억고분자 복합재료는 가볍고, 변형률이 크며, 좋은 가공성과 비용적인 측면에서의 장점으로 우주환경에서 사용되는 전개형 안테나 재료로의 활용이 검토되고 있다. 본 연구에서는 탄소나노튜브를 보강재로 하여 물성이 향상된 형상기억고분자 복합재료를 제조하고, 이를 사용하여 전개형 안테나를 제작하였다. 탄소나노튜브를 형상기억고분자 기지재 안에 분산시키기 위해 다양한 방법이 사용되었고 물성적인 측면에서 우수한 분산 방법을 탐색하였다. 이렇게 제조된 형상기억고분자 복합재료의 형상기억거동을 평가하였고 형상기억고분자 복합재료 안테나의 전개 거동을 분석하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.109-111
• /
• 2006

In this study, microstructure and mechanical properties for the friction stir welded 2519Al-T87 alloy of the thickness of 38.8mm were studied using DSC, OM, SEM and micro hardness tester. DSC analysis show that GP Zone, ${\theta}'$ and $\theta$ phases in upper part and ${\theta}'$ and $\theta$ phase in lower part of the FSW zone. Recrystallized large grains are observed in HAZ, and elongated small and large grain in the TMAZ. In SZ, very small grains forms by high plastic deformation and heat from friction by tool and specimen.

• 한국군사과학기술학회지
• /
• 제8권1호
• /
• pp.5-13
• /
• 2005

In order to evaluate the credibility of the welded joint design for combat vehicle using A12519, the numerical analysis for the joint model has been studied and the results are compared with the experimental works by the impact projectiles. The numerical approach using LS-DYNA involves the process of the crack initiation and propagation as well as the applications of the failure criteria for both the ductile and brittle failures. The good agreement between the numerical and experimental works are proved.

• 대한간호학회지
• /
• 제32권4호
• /
• pp.447-458
• /
• 2002

The primary purpose of this study is to provide a useful insight for developing effective teaching and student counseling methods by understanding the relationship between four preference patterns of MBTI personality types and EWHA defense mechanisms of nursing college students. Method: The data used in this research were collected administrating EWHA defense mechanism test and MBTI personality type instrument to 195 nursing students in the period of November 3 through September 16 in 2000. Collected data were analysed by pc-SPSS 10.0. Result: Three general conclusions were drawn from the study results: (1) in terms of personality type, 'Extraversion', 'Sensing', 'Thinking', and 'Judgement' types showed high frequency respectively; (2) in terms of defense mechanism, 'Identification' showed the highest score, and then 'suppression' scored next followed by 'Humor'. However, 'Acting out' showed the lowest average score, and then 'Projection' followed by 'Denial'; (3) Based on the relationship between defense mechanism and four MBTI preference patterns, it can be drawn that students with the preference of 'Extraversion' usually use defense mechanism of 'Altruism', 'Sublimation', 'Distortion', 'Controlling', and 'Humor'. In comparison, students with the preference of 'Introversion' often use the defence mechanism of 'Evasion' and 'Projection'. Conclusion: The study results can be utilized in both fields of education and counseling: (1) in the field of education, this study can provide a basis for developing a suitable teaching method for each personality types of nursing students; (2) for counseling practitioners, the results of this study provide the useful insights to understand nursing college students' communication skills, behavior patterns, and ability of coping with problems in the process of counseling.