• 한국군사과학기술학회지
• /
• 제24권3호
• /
• pp.272-280
• /
• 2021

We research and develop a SW-based virtual testing product that can be commonly used in the design/development of non-communication EW systems before the production of physical test products. Through this study, we have developed M&S technology to improve the accuracy of EW weapon system analysis/design and to verify and predict the performance of EW equipment, and to develop proven engineering module models and model base systems. It proposes a technology to build an EW M&S framework that can flexibly link/integrate various engineering/engage-level EW heterogeneous M&S systems.

• 한국군사과학기술학회지
• /
• 제17권4호
• /
• pp.436-447
• /
• 2014

The major elements of avionics system architecture are requirements, Real Time Operating System, message communication, memory, and data format etc. Herein describes a state-of-the-art development trend for the avionics system architecture, system requirements and data bus among the major elements of avionics system. While, domestic technology has been tried to Integrated Modular Avionics(IMA) system based on the Avionics Full Duplex Switched Ethernet(AFDX) technology during Light Attack Helicopter(LAH) project in Korea, but not yet proved as the product case in Full Scale Development Phase. The avionics system architecture considering the domestic inexperience of the IMA system architecture are suggested for the Next-generation Corps Unmanned Aircraft System.

• 한국군사과학기술학회지
• /
• 제18권3호
• /
• pp.326-334
• /
• 2015

This paper describes the verification and the validation about the development of the integrated interoperability system for live, virtual, and constructive simulations on the aircraft weapon system. The proposed integrated interoperability system provides the framework and application softwares for implementing a synthetic environment emulating real-world environment among distributed simulation models, which are a mission model and an air combat model of a constructive level, an tactical simulator of a virtual level, and simulated ACMI of a live level. In this paper, we verify requested functions through an developmental test and evaluation, and validate operability and usability through conducing integrated LVC scenarios on the integrated interoperability system.

• 한국군사과학기술학회지
• /
• 제21권5호
• /
• pp.623-629
• /
• 2018

The acceleration and the angular velocity that include natural frequencies of a missile detected by Inertial Measurement Unit(IMU) are transmitted to the control loop of a missile. The control loop command that is calculated using above signals can cause the resonance of the missile while it flies. Hence it is common to adapt the filter and the control loop for attenuating or eliminating the undesired signals such as natural frequencies. This paper introduces the new test technique using a floating system for performance evaluation of the designed filter and the control loop prior to a flight test. The proposed scheme can check out the degradation property of vibration in the filter and the control loop, while the conventional hardware-in-the-loop simulation(HILS) scheme cannot.

• 한국군사과학기술학회지
• /
• 제17권5호
• /
• pp.591-603
• /
• 2014

In this paper, we have described the characteristics of the Underwater Distributed Sensor Network (UDSN) and proposed the conceptual design guideline by an effectiveness analysis. To perform the effectiveness analysis, we defined an battlefield environment, and then analyzed principal components which compose the UDSN to find out simulation parameters and system constraints. We have chosen a measure of effectiveness based on a target trajectory, which could enhance intuitive understanding about current status, and performed various simulations to reveal critical design parameters in terms of sensor node types, arrangement, cost and combination of detection information.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.369-375
• /
• 2017

One of good DF(Direction Finding) methods is based on TDOA(Time Difference of Arrival) estimation when finding underwater moving target. For small DF error, high time resolution A/D(Analog-to-digital) conversion board and long baseline are needed. But the result of sea trial about close-range and high speed moving target, spatial correlation coefficient and appeared poor properties below 0.3 when hydrophone arrangement are separated over 6 ${\lambda}$ because of underwater fading channel. And we also find out that the distance between hydrophone should be under 4 ${\lambda}$ apart to take advantage of spatial correlation coefficient gain and performance of DF in underwater moving channel environments.

• 한국군사과학기술학회지
• /
• 제20권5호
• /
• pp.639-646
• /
• 2017

This paper describes the sound insulation and structural safety of the shelter which may be used for shooters. The noise level of the shelter should be less than 100 dB on the basis of the Industrial Safety and Act, the World Health Organization and the MIL-STD. The sound insulation design was designed for the shelter structure. The designed shelter performance was verified by the real measurement after completing the construction of the shelter. The system was also designed using the finite element method with data of sound pressure measured in the test. Its response was obtained numerically. It is proved that the shelter structure is sufficiently safe considering the calculated maximum stress level with the allowable stress of structural property.

• 한국군사과학기술학회지
• /
• 제18권3호
• /
• pp.335-342
• /
• 2015

Laboratory facilities for biology are designed as biosafety level 1, biosafety level 2, biosafety level 3, and biosafety level 4. Biosafety level designations are based on a composite of the design features, construction, containment facilities, equipment, practice and operation procedures required for working with agents from the various risk groups. Generally, biosafety level 3 means the facility that is appropriate for the experiments using pathogens which can cause serious diseases by aerosol transmission. The biosafety level assigned for the specific work to be done is driven by professional judgement based on a risk assessment, rather than by automatic assignment according to the particular risk group designation of the pathogenic agents to be used. In this paper, we introduced the biosafety level 3 facility operated in ADD(Agency for defense development). It contains the overview of facility, microbiological experiment, animal experiment, decontamination and waste disposal. Biosafety level 3 laboratory in ADD has served the vital role in the research of biological agents and antidote development.

• 한국군사과학기술학회지
• /
• 제26권4호
• /
• pp.335-343
• /
• 2023

Drone based Magnetic Anomaly Detection measure a magnetic anomaly signal from the ferromagnetic target on the ground. We conduct a magnetic anomaly detection with 9 ferromagnetic targets on the ground. By removing the magnetic field measured in the absence of ferromagnetic targets from the experimental value, the magnetic anomaly signal is clearly measured at an altitude of 100 m. We analyze the signal characteristics by the ferromagnetic target through simulation using COMSOL multiphysics. The simulation results are within the GPS error range of the experimental results.

• 한국군사과학기술학회지
• /
• 제22권2호
• /
• pp.162-169
• /
• 2019

This paper describes a thermal image processing algorithm for uncooled type TEC-less IR detector which is applicable to fire control system of small arms. We implemented a real-time gain and offset compensation algorithm based on polynomial approximation from the raw dataset which is acquired by two reference temperature of blackbody from various FPA(Focal Plane Array) temperature. Through the experiment, we analyzed the output characteristics of detector's raw-data and compared IR image quality to traditional non-uniformity correction method. It shows that the proposed method works well in all FPA temperature range with low residual non-uniformity.