• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.131-134
• /
• 2004

The hub hole is usually formed with a stretch flanging process followed by a blanking process of a hole. Since the hole is made by blanking, the blanked surface is so rough that the formability in the region is rather poor. The emerging task is to identify the formability of the blanked region in the forming simulation and to relate the criterion to the real forming process by experiments. In this paper, the blanked region of a hole surface is modeled by a defected-edge finite element for stretch flanging simulation. The analysis deals with the level of defect in the blanked region in order to identify the formability in the real process. The analysis provides the formability depending on the level of defect and seeks the way to match the level of defect to that of the real surface. The approach makes the analysis possible to deal with the formability of the high strength steel and predict the fracture at the hole surface during the stretch flanging simulation.

• The Journal of the Korea Contents Association
• /
• v.17 no.7
• /
• pp.182-192
• /
• 2017

Recently, there is an increasing interest in analysis of big data that is coming from manufacturing industry. In this paper, we use PCB (Printed Circuit Board) manufacturing data to provide manufacturers with information on areas with high PCB defect rates, and to visualize them to facilitate production and quality control. We use the K-means and DBSCAN clustering algorithms to derive the high fraction of PCB defects, and compare which of the two algorithms provides more accurate results. Finally, we develop a system of MVC structure to visualize the information about bad clusters obtained through clustering, and visualize the defected areas on actual PCB images.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.3
• /
• pp.229-236
• /
• 2009

Purpose: Some recent literatures report that it is possible to recover defected areas caused by enucleation of relatively large jaw cysts without using bone grafts. The aim was to find out whether spontaneous recovery of defected area with time occurred and what the contributing factors were. Materials and methods: In total, 194 patients were considered as patients. Out of these 194 patients, 74 patients who had no wound dehiscence and who were available for follow-up studies were selected. They were classified into two groups according to the size of radiolucent area in the preoperative panoramic radiographs: in one group, it was larger than $3{\times}4cm$, while in the other group, it was smaller than $3{\times}4cm$. Follow-up panoramic radiographs were taken immediately after the surgery, then after 3, 6, 9 and 12 months. On those radiographs, changes in size and density of the defected areas were observed using the Gray-level histogram of Adobe photoshop v7.0. Correlation between bone regeneration and factors such as the type and size of the cysts, age, sex, site of the cysts and systemic disease was evaluated using the General repeated measure and Mann-Whitney Test. Results: Analyses of panoramic radiographs showed that the recovery of radiopacity after 12 months was more than 97% on average in defected areas that were smaller than $3{\times}4cm$. in the defected areas that were larger than $3{\times}4cm$, considerable portion showed recovery of radiopacity. No statistically significant change was observed in bone density according to the type of cysts. Young patients under 20 years of age with highly active metabolism presented more significant bone regeneration than patients over 20 years of age. Bone regeneration was more hampered in patients who had medical disease, compared with patients who didn’t have any medical problem. No statistically significant change was seen in bone density according to sex. Changes in bone density according to the site of cysts such as maxilla, mandible, anterior or posterior region were not considered to be significant. Conclusion: Analyses of panoramic radiographs suggest that in approximately 12 months after the enucleation of cysts, clinically acceptable spontaneous bone regeneration can be observed even though normal bone graft procedures have not been applied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1106-1115
• /
• 2006

In this paper, the transmission characteristics and equivalent circuit model of microstrip transmission line having defected ground structure (DGS) in multilayer substrates are described fur high frequency region. In order to perform the study, the second dielectric layer is attached additionally onto the bottom(ground) plane of the basic DGS microstrip line consisted of the microstrip line and DGS. The dielectric constant and thickness of the second dielectric layer are adjusted to get various transmission characteristics and model parameters, and to analysis the effect of the second dielectric layer ultimately. According to this paper, the effect and equivalent circuits due to the attached dielectric substrate are verified separately, and this is expected to be applied to high frequency circuit design in the future.

• Journal of Veterinary Clinics
• /
• v.24 no.3
• /
• pp.350-357
• /
• 2007

Bone graft had been widely investigated for reconstruction of bone defects or acceleration of bone healing in orthopedics, neurosurgery and dental surgery. Autograft is the golden standard of bone graft but it is associated with donor site morbidity and is restricted in quantity. Xenograft has been researched an alternative method for autograft. The purpose of this study was to investigate the efficacy of new bone formation according to three different preparations of implants on rabbit xenograft. Cortical bone xenografts which made from bovine femoral cortical bone were treated by freezing, freeze-drying or defat-freezing implant preparations. They were transplanted into proximal diaphyseal shaft of bifibulae of 15 rabbits which were divided into three groups according to their implant preparation method. The fibulae transplantations were evaluated radiographically and examined osteoblast activity by bone alkaline phosphatase (BALP) biweekly for 16 weeks to observe new bone formation and union of the experimental defected region. New bone formation was observed in 7 cases in freeze-drying and defat-freezing group, respectively. Union of proximal and distal end of defected region, which was considered as success of bone graft, was observed in 4 cases (40%; 4 of 10 cases), respectively. In freezing group, new bone formation was observed in 6 cases but, there is no union observed. BALP value was increased over twice after two weeks of graft procedure in all union cases of freeze-drying and defat-freezing group (two of five animals, respectively) then gradually decreased to 16th week. In non-union cases, there is no significant variation in BALP value. Defat-freezing or freeze-drying preparations of implants are more efficacious in new bone formation than freezing method on rabbit xenograft. While it is difficult to propose which is superior between defat-freezing and freeze-drying, defatting of implants may enhance new bone formation in xenograft.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2298-2304
• /
• 2011

This paper describes and presents the design of a miniaturized low pass filter (LPF) for microwave frequency region using a common defected ground structure (CDGS). In this study a half-sized LPF is obtained using CDGS, while the previous LPFs with the conventional DGS showed a mild size-reduction. The common DGS (CDGS) is realized on the common ground plane of two microstrip lines, i. e double-sided microstrip lines, which exist back-to-back to each other. In order to show the validity of the proposed design, an example of LPF using CDGS and double-sided microstrip lines is designed, fabricated and measured using the dielectric substrate with the dielectric constant of 2.2 and with the thickness of 31mils. The size of the designed LPF using CDGS is only 52.6% compared to that of the previous LPF with the conventional DGS. In addition, it is shown that the performances of the proposed LPF are well preserved after the size-reduction with the measured S11 and S21 of -22dB, min and -0.19dB, max, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.2
• /
• pp.46-54
• /
• 1996

This study was carried out to investigate the vacuum drying characteristics of 50mm- and 75mm- thick tree disks of some domestic softwoods for substituting the conventional hardwoods as the materials for wood crafts. Though the elapsed drying times from green to in-use moisture content(MC) were largely shortened by vacuum drying, the tree disks treated by EWS couldn't be dried to in-use MC, and so sapwood stains also were occurred severely. We suggest EWS treatment is undesirable for the species with very high sapwood portion or vacuum drying with hot water circulation heating system. Heart checks were slight, but sapwood checks, which have never been trouble in drying process of tree disks, were severe. For the reasonable explanation it is suggested MC differences between sapwood and heartwood were large and most of tree disks had already no barks before drying test. Ginkgo was vacuum-dried with very slight drying defects such as heart checks, sapwood checks. V-cracks and sapwood stains. In Korean red pine and pitch pine V-cracks were severely occurred. And it was found the special feature that most of these defected tree disks contained several V-cracks within one tree disk. It can be considered as the causes that the region of sapwood was defected by the several checks at the early drying stage because of the steep MC gradient along the radial direction, and then at the later drying stage the drying stresses due to differential shrinkage were concentrated on these brittle spots.

• Journal of radiological science and technology
• /
• v.37 no.2
• /
• pp.117-124
• /
• 2014

This study has investigated the effects of the defects in the probe elements influence Doppler images in the medical ultrasonic scanners. This work was implemented that the quality of Doppler images depended on the extent and location of the probe element defected. The probe performance was rated in terms of the number of piezoelectric elements lost and this was studied in the experiment by electrical disconnection to the elements. The results showed that Doppler velocity became rapidly reduced as the defected elements encountered with the element group activated at the Doppler mode, not as the flow velocity. The effect of the probe defect is decreased when the defects occurred at the element group activated for Doppler mode, as was increased the number of the elements. It was observed that the higher the flow velocity of Doppler flow phantom is, the wider the spectrum of Doppler is. And the Doppler velocity soared up and the dispersion of image brightness is increased when the defected elements got out of the elements activated at Doppler mode. The result showed that TADVP(time-average-Doppler-velocity-profile) is decreased with the increase of the probe element defect, especilly in the region of high frequency. It is expected that the research of various defects of probe elements are needed, and this study can be practical tools for probe based ultrasonic QA in the future.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.6
• /
• pp.474-480
• /
• 2009

These is a cases of chronic suppurative osteomyelitis occurred in the mandibular body to condyle of 48-year-old male patient. Extensive bone destruction was noted on the right mandibular body, angle, ascending ramus, mandibular notch and condylar region. We made a treatment plan that radicular mandibular resection from body to condyle and mandibular reconstruction with vascularized fibular flap at first time. But, we could observe marked bone regeneration with only mild curettage, local wound care and massive antibiotic therapy. So we preserved the anterior ramus portion of mandible. Defected mandibular condyle was reconstructed with costochondral graft. In this paper we present the case of a patient who has chronic osteomyelitis in mandibular area.

• Journal of Veterinary Clinics
• /
• v.23 no.3
• /
• pp.258-262
• /
• 2006

This study was performed to evaluate the usefulness of gray-scale and power Doppler ultrasonography, and to compare with radiography for detection of the repairing in experimentally induced bone defects in dogs. In 4 adult beagle dogs bilateral bone defects were created in 8 canine femurs as sized as 5 mm diameter. Mean detection time of the ultrasonographic endosteal callus formations(mean $14.25{\pm}2.31$ days) was significantly shorter than that of the radiographic opacity chanees(mean $23.50{\pm}2.27$ days) in the defected region. Mean time of the neovascularizd flow signal(mean $6.00{\pm}3.59$ days) from the power Doppler ultrasonographic examination was significantly shorter than that of gray-scale ultrasonographic findings. With these results, gray-scale ultransonography and power Doppler ultrasonography can be used for an early detection modality for bone healing.