• The Korean Society of Law and Medicine
• /
• v.20 no.1
• /
• pp.109-132
• /
• 2019

Recently, medical accidents related to surgical procedures have increased. In addition, the media reported that some of these accidents were involved in health crimes. Patient-advocate groups have called for mandatory establishment and management of CCTV in operating rooms. There is a lot of discussion among the interested parties, so it is necessary to review the relevant laws and regulations. The purpose of this study is to identify the characteristics of CCTV in operating rooms and to review legislations related to establishment and management of the CCTV in operating rooms. Medical institutions use CCTV for management of facilities and patient safety and install it in operating rooms optionally. The Constitution guarantees the privacy and the privacy of correspondence of every citizen, but it can be limited by the law for public welfare. Currently, however, there is no existing law about establishment and management of the CCTV in operating rooms and it can be defect of legal system. Under the current legislations, it is likely that the Self-determination can be violated due to the characteristic of healthcare provider when CCTV is mandatorily installed in operating room. In addition, the regulations on access and leakage of confidential information known by operator are insufficient. So that, the safety of the visual data might be threatened. Furthermore, unless the period and the place of storage of the visual data are clearly defined, it is highly unlikely to meet the original purpose of patient safety and prevention of medical accidents. This study is meaningful as there is few previous study on this topic although the need for legal review about this is growing and several bills are being proposed. It is expected that the results of this study can be utilized as basic data for enactment or amendment of the laws and regulations about establishment and management of CCTV in operating rooms.

• Journal of Distribution Science
• /
• v.9 no.3
• /
• pp.83-94
• /
• 2011

Most domestic companies, with the exclusion of major firms, are reluctant to implement a supply chain management (SCM) network into their operations. Most small- and medium-sized enterprises are not even aware of SCM. Due to the inherent total-systems efficiency of SCM, it coordinates domestic manufacturers, subcontractors, distributors, and physical distributors and cuts down on cost of inventory control, as well as demand management. Furthermore, a lack of SCM causes a decrease in competitiveness for domestic companies. The reason lies in the fundamentality of SCM, which is the characteristic of information sharing, process innovation throughout SCM, and the vast range of problems the SCM management tool is able to address. This study suggests the contemplation and reformation of the current SCM situation by analyzing the SCM strategic plan, discourses and logical discussions on the topic, and a successful case for adapting SCM; hence, the study plans to productively "process" SCM. First, it is necessary to contemplate the theoretical background of SCM before discussing how to successfully process SCM. I will describe the concept and background of SCM in Chapter 2, with a definition of SCM, types of SCM promotional activities, fields of SCM, necessity of applying SCM, and the effects of SCM. All of the defects in currently processing SCM will be introduced in Chapter 3. Discussion items include the following: the Bullwhip Effect; the breakdown in supply chain and sales networks due to e-business; the issue that even though the key to a successful SCM is cooperation between the production and distribution company, during the process of SCM, the companies, many times, put their profits first, resulting in a possible defect in demands estimation. Furthermore, the problems of processing SCM in a domestic distribution-production company concern Information Technology; for example, the new system introduced to the company is not compatible with the pre-existing document architecture. Second, for effective management, distribution and production companies should cooperate and enhance their partnership in the aspect of the corporation; however, in reality, this seldom occurs. Third, in the aspect of the work process, introducing SCM could provoke corporations during the integration of the distribution-production process. Fourth, to increase the achievement of the SCM strategy process, they need to set up a cross-functional team; however, many times, business partners lack the cooperation and business-information sharing tools necessary to effect the transition to SCM. Chapter 4 will address an SCM strategic plan and a case study of LG Electronics. The purpose of the strategic plan, strategic plans for types of business, adopting SCM in a distribution company, and the global supply chain process of LG Electronics will be introduced. The conclusion of the study is located in Chapter 5, which addresses the issue of the fierce competition that companies currently face in the global market environment and their increased investment in SCM, in order to better cope with short product life cycle and high customer expectations. The SCM management system has evolved through the adaptation of improved information, communication, and transportation technologies; now, it demands the utilization of various strategic resources. The introduction of SCM provides benefits to the management of a network of interconnected businesses by securing customer loyalty with cost and time savings, derived through the consolidation of many distribution systems; additionally, SCM helps enterprises form a wide range of marketing strategies. Thus, we could conclude that not only the distributors but all types of businesses should adopt the systems approach to supply chain strategies. SCM deals with the basic stream of distribution and increases the value of a company by replacing physical distribution with information. By the company obtaining and sharing ready information, it is able to create customer satisfaction at the end point of delivery to the consumer.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.60-70
• /
• 2011

Conventional content management systems are independently developed for a specific field in general. Therefore usage of contents for the CMS will be limited to the corresponding CMS field. These characteristics might reveal a defect that CMS could not support effectively in exchange and sharing of information between CMSs. On the other hand, metadata standardization shows big differences in method and representation for the fields of CMS because all metadata standardizations are variously performed according to applications of them. There are lots differences that make interoperability between CMSs impossible. In this paper, we propose a novel metadata schema based on METS(metadata encoding and transmission standard) so that metadata standardization can be fulfilled in reality and solved the problem of duplicated contents created from different CMSs. This framework of integrated metadata proposed here can offer an interoperability between contents created by different CMSs, and discard duplicated contents. As a result of the proposed technology, we obtain 0.5% duplication rate from traditional 10.3%. In addition the filtering ability of duplicated contents shows from 92% to 96%, which proves the effectiveness and stability of the proposed technology.

• Management & Information Systems Review
• /
• v.28 no.3
• /
• pp.161-189
• /
• 2009

The sub-prime crisis led to the collapse of US investment banks which were considered highly competitive during the Asian Financial Crisis. The event gave us a lesson on importance of the financial supervision. Additionally concerns rise over the fact that the role model of the Capital Market Law, created for the purpose of developing the capital market, is the US investment banks. This paper investigates if the prudential regulations, among them especially the capital regulation, are able to prevent the risk the arises from Korean financial firms operating investment bank business. The current capital requirement regulation, Net Capital Ratio(NCR), is not sufficient, because it's nature of being a ratio makes the NCR ineffective when assets and liabilities are concurrently rising. We also verified the internal model which measured the market risk, by comparing the US investment and Korean banks' diversification effect. The result of the test is that it is difficult to conclude the internal model has a critical defect. This paper's contribution is that it is not sufficient use only the capital regulation in supervising financial markets.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.14-21
• /
• 2011

A unit modular system is a construction method which installs on site by manufacturing 50%~90% of the whole process in the factory. This method can minimize the process in the site and maximize the operation, which will reduce the duration and improve the overall quality. The recent paradigm of construction is to be sustainable building. Modular system can be regarded as a sustainable building construction method because it can reduce the amount of construction waste by recycling partial or whole part of overdue building be torn down. A unit modular system is the answer to cope with the increasing market of small size housings. A unit modular system is the most appropriate option at this point. This research proposes the standard operation and construction process of modular system, which enable to optimal system. A case study of reconstructing small-size housing was introduced to support this proposal. Finished unit modular is the reasonable way. However, 80% of complication rate of the modular is the most rational when a defect occurrence during delivery is considered.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.3
• /
• pp.593-600
• /
• 1996

This case report is a treatment of patient with hemophilia A and autism. The patient's chief complaint was treatment of dental caries on entire dentition and he has an impacted mesiodens located on the apex of the upper right primary central incisor. The patient was consulted with pediatrician and anesthetist about the detailed discussion of the complexities of hemorrhagic disorder. Because he had some problems of behavior management and bleeding, the treatment was done under the gerneral anesthesia. The following results were obtained. 1. Consult with the patient's physician and hematologist about the replacement therapy and bleeding tendency. 2. For the severe hemophiliac child who requires extensive or surgical treatment, general anesthesia may be indicated for the comprehensive care. 3. For the hemophiliac child who has a behavior management problem due to autism and other defects, general anesthesia may be considerable. 4. Care must be taken during dental procedures not to causing a bleeding. 5. Local hemostatic methods must be acquired for the emergency state. 6. Neve prescribe aspirin or non-steroidal anti-inflammatory drugs such as ibuprofen, indomethacin, and phenylbutazone. These drugs affect platelet aggregation and exaggerate the bleeding defect. 7. Do not be afraid of hemophiliac patient, and never compromise quality of dental care.

• Journal of Society of Preventive Korean Medicine
• /
• v.7 no.2
• /
• pp.121-130
• /
• 2003

The Musculoskeletal Disease has been ignored or turned away due to the difficulty of diagnosis and the vagueness of judgement up to now. Contrary to other diseases, there were many cases where the character of the Musculoskeletal Disease wasn't revealed through the objective inspection. And that's because the Musculoskeletal Disease appears for the most part due to muscular defect so it is impossible to diagnose the muscle by X-ray diagnosing the bone and it is also impossible to diagnose the fine damage of the muscle or tendon even by advanced device like MRI. As the nervous blood vessels or acupunctures pass through or are next to the muscle, the tension of the muscle put pressure on these so can become the direct or indirect causes of various kinds of pains or intern diseases. But in spite of that, for lack of proper equipment diagnosing the state of the muscle(Shortened.. Relaxed... or Hardened...) the muscle has been disregarded or neglected intentionally or unintentionally. While many people think themselves to be a muscular expert, if they don't see the shape of the muscle, that is just like blind treatment. But as now the equipment diagnosing the state of the muscle is developed, it seems that this problem can be settled. It was attempted in this study that the muscle or skeleton of the Musculoskeletal disease patients was diagno the treatment order and method were decided by a questionnaire survey and simple inspection, and the Musculoskeletal correction exercise using the muscle management and sling system made them escape from the Musculoskeletal disease, turning their muscle into more flexible and stronger muscle. As a result notwithstanding the limited treatment period '12 times', the improvement rate was as high as 74%, which showed that the muscle management and Musculoskeletal correction exercise had a great effect on the symptom improvement of the patients. If the treatment times had increased, the improvement rate also would have increased more.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.3
• /
• pp.33-41
• /
• 2017

A modular specification is a contract document that specifies the requirements of production, transformation and installation in a modular construction. A problem of the currently used specification is that it does not guarantee the level of performance required by the modular construction and fails to accommodate unique characteristics of each construction because it widely uses the standard specification as it is. This study proposes a specification that reflects the unique feature of modular construction in order to improve the quality of modular construction. Research focuses on the leakage in waterproof and mechanical equipment because it is the area with the highest rate of defects. This study suggests ways to improve the modular specification as follows: 1)Descriptive specifying (following MasterFormat) 2)Propose leakage verification method and test clause 3) Reflect characteristic of modular construction. Proposed modifications to modular specification are reviewed by experts for validation and their opinion verifies suggested improvements as a way to secure the quality of modular construction and to promise characteristics of the modular specification. This improvement will be used for reference when writing construction project specification, which can be an important contract document, so that it could lower occurrence rate of the modular defects.

• Journal of Digital Convergence
• /
• v.18 no.4
• /
• pp.23-35
• /
• 2020

This study is based on prior research cases on workplace learning, which had a significant impact on corporate research. To improve problem solving and supplementing ability by keeping the opportunity to participate in workplace learning for the weak small business owners and to strengthen opportunities for practical growth, and to propose education, policy and institutional windowing. Therefore, to establish the relationship between small business owners' workplace learning, job satisfaction, and service quality, a research hypothesis was set in the background of prior research and empirical analysis was conducted. The results from 203 questionnaires were analyzed with SPSS 18.0 program. As an analytical result, first, workplace learning had a partial positive (+) impact on job satisfaction. Second, workplace learning had a partial positive (+) impact on service quality. Third, in the relationship between workplace learning and service quality, job satisfaction played a full mediating role. From this, it was found that formal learning, the subfactor of workplace learning did not have an impact on job satisfaction and service quality, as subtitle of educational environment including offsite training and self education, systematization, and structuralization depending on the poor environment of small enterprises. Therefore, it was found that small enterprises' poor environment was revealed from the managerial, economic and social perspectives and to compensate such defect, educational, policy, and institutional strategies to strengthen the opportunity for growth and development of small enterprises can be suggested to the governmental agencies or local governments. Despite the significant results of this study, there may be limitations. Therefore, further studies should be conducted in various fields with various samples in the future, and further studies should be conducted in academic and practical relationships that can improve the service quality and management performance.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.6
• /
• pp.112-123
• /
• 2015

Many disputes are happened with various causes in overseas construction projects. One of major disputes is closely related with nominated subcontractors (NSC). This paper investigates 30 judical precedents for Singapore, Malaysia and Hongkong to analyze the detailed disputes related with the NSC, and then the judical precedents are classified into 6 categories: Delay and Defect Trouble (T1), Contract Relation (T2), Payment Trouble (T3), Set-off (T4), Liquidation (T5) and so forth (T6). According to the analytical results, the frequency of occurrence of disputes is considerably related with social and economical changes, and the dispute between NSC and employer for residential and commercial building projects is the most frequently happened case. As the results of analysis, therefore, it is concluded that the employer needs to response aggressively to the problems related with NSC, and it is also important to make the council for communication among related bodies. Furthermore, the institutional reform that make the role and the responsibility of employer consistent under considering contract terms and conditions is considered as the most important and fundamental issue.