• 한국산업정보학회논문지
• /
• 제19권6호
• /
• pp.43-51
• /
• 2014

TFT-LCD 영상은 다양한 특성의 결함을 포함하고 있다. 배경 영역과의 휘도 차이가 커서 육안으로 식별 가능한 결함부터 휘도 차이가 매우 적어서 육안 검출이 어려운 한도성 결함까지 포함한다. 본 논문에서는 휘도 차이를 이용하여 결함 영역에 포함될 확률이 높은 결함 화소부터 순차적으로 단계를 진행하면서 결함 후보 화소를 검출하고, 검출된 후보 화소를 블랍으로 구성하여 블랍의 크기와 주변 영역과의 휘도차이를 이용한 기법을 통해 최종적으로 결함 영역과 잡음을 구분하여 검출하는 알고리즘을 제안한다. 제안한 알고리즘의 타당성을 확인하기 위해 다양한 결함을 포함하는 영상에 대한 실험 결과를 살펴봄으로써 신뢰도 높은 결함 검출 결과를 입증하였다.

• Journal of Mechanical Science and Technology
• /
• 제14권5호
• /
• pp.530-536
• /
• 2000

In this paper, the influence of several factors such as hardness, internal defect and non-propagating crack on fatigue limits was investigated with three kinds of ductile iron specimens. From the experimental results the fatigue limits were examined in relation with hardness and tensile strength in case of high strength specimens under austempering treatment; in consequence the marked improvement of fatigue limits were not showed. The maximum defect size was an important factor to predict and to evaluate the fatigue limits of ductile irons. And, the quantitative relationship between the fatigue limits$({\sigma}_w)$ and the maximum defect sizes $(\sqrt{area}_{max})$ was expressed as ${\sigma}_w^n{\cdot}{\sqrt{area}}_{max}=C_2$. Also, it was possible to explain the difference for the fatigue limits in three ductile irons by introduction of the non-propagating crack rates.

• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.619-628
• /
• 2015

In this paper, we consider a method for estimating a stripe-type defect and the reconstruction of a defect-free L/S type mask used in lithography. Comparing diffraction patterns of defected and defect-free masks, we derive equations for the estimation of the location and size of the defect. We construct an analytical model for this problem and derive closed form equations to determine the location and size using phase retrieval problem solving techniques. Consequently, we develop an algorithm that determines a defect-free mask pattern. An example shows the validity of the equations.

• 비파괴검사학회지
• /
• 제30권1호
• /
• pp.13-19
• /
• 2010

본 논문에서는 원전SG세관 결함 크기 추정을 위한 새로운 구조의 추정시스템에 대한 연구를 수행한다. 기존의 연구에서는 결함 크기를 추정하기 위하여 각각의 결함 형태별로 결함크기추정시스템을 설계하였다. 이와 같은 경우, 추정시스템의 구조가 복잡해지고 결함 크기 추정 이전에 수행하는 결함형태분류기의 정확성이 떨어질 경우 결함 크기 추정 성능도 결과적으로 악화될 수밖에 없다. 이에 본 논문에서는 결함 형태 분류 과정을 필요로 하지 않는 결함크기추정시스템의 성능을 분석하고 이를 향상시키기 위한 방안을 연구하였다. 기존의 추정시스템은 각각의 결함 형태별로 특화된 추정기를 사용하기 때문에 추정 성능이 훨씬 뛰어날 것으로 예상되었지만, 실험 결과 두 추정시스템의 성능 차이는 그리 크지 않다는 것을 알 수 있었다. 따라서 결함형태분류기의 정확성이 완벽하지 않을 경우, 본 논문에서 제안한 구조의 추정기가 효과적으로 사용될 수 있을 것으로 기대된다.

• 대한전자공학회논문지SD
• /
• 제38권4호
• /
• pp.266-276
• /
• 2001

빠른 반도체 기술의 발전으로 인하여 VLSI 회로의 복잡도는 크게 증가하고 있다. 그래서 복잡한 회로를 테스팅하는 것은 아주 어려운 문제로 대두되고 있다. 또한 집적회로의 증가된 집적도로 인하여 여러 가지 형태의 고장이 발생하게 됨으로써 테스팅은 더욱 중요한 문제로 대두되고 있다. 이제까지 일반적으로 지연 고장 테스팅에 대한 신뢰도는 가정된 고장의 개수에 대한 검출된 고장의 개수로 표현되는 전통적인 고장 검출율로서 평가되었다. 그러나 기존의 교장 검출율은 고장 존재의 유무만을 고려한 것으로써 실제의 지연 고장 테스팅에 대한 신뢰도와는 거리가 있다. 지연 고장 테스팅은 고착 고장과는 달리 경로의 진행 지연과 지연 결함 크기 그리고 시스템 동작 클럭 주기에 의존하기 때문이다. 본 논문은 테스트 중인 경로의 진행 지연과 지연 결함 크기를 고려한 새로운 고장 검출율 메트릭으로서지연 결함 고장 검출율(delay defect fault coverage)을 제안하였으며, 지연 결함 고장 검출율과 결함 수준(defect level)과의 관계를 분석하였다.

• 한국표면공학회지
• /
• 제49권2호
• /
• pp.111-118
• /
• 2016

A method to quantitatively analyze the defects formed by the hydrogen evolution during electroplating was suggested based on the theoretical approach of the small angle neutron scattering technique. In case of trivalent chrome layers, an isolated defect size due to the hydrogen evolution was about 40 nm. Direct and pulse plating conditions gave the average defect size of about 4.9 and $4.5{\mu}m$ with rod or calabash shape, respectively. Current density change of the pulse plating from $1.5A/dm^2$ to $2.0A/dm^2$ enlarged the average defect size from 3.3 to $7.8{\mu}m$. The defect morphology like rod or calabash was originated by inter-connecting the isolated defects. Small angle neutron scattering was useful to quantitatively evaluate defect morphology of the deposit.

• 한국생산제조학회지
• /
• 제6권1호
• /
• pp.45-50
• /
• 1997

It is not clearly known how surface defects or inclusions of a medium carbon steel affect a fatigue strength. In this study, we used SM35C specimens with spheroidized cementite structure to eliminate dependence of micro structure of fatigue crack. The investigation was carried out by behavior of crack closure at non-propagation crack and effect of the fatigue limit according to the artificial defects size. Experimental findings are obtained as follows : (1) Fatigue crack initiation point of medium carbon steel with spheroidized cementite structure is at the surface defects. (2) Non-propagating crack length of smooth specimen is equal to the critical size of defect. (3) Considering the opening and closure behavior of fatigue crack, the defect shape results in various crack opening displacement, while it does not affects the fatigue limit level of medium carbon steel with spheroidized cementite structure. (4) The critical length of the non-propagation crack of smooth specimen is the same as critical size of defect in transient area which determines threshold condition in steel with spheroidized cementite structure.

• 대한전자공학회논문지TC
• /
• 제41권8호
• /
• pp.69-78
• /
• 2004

본 논문은 Malaiya와 denton이 제안한 모듈크기(module size)와 소프트웨어 결함밀도와의 관계를 확률 모델화하는데 있어서 고려할 사항으로 정확한 소프트웨어 결함밀도를 추정하는데 그 목적이 있다. 구체적으로 말하면 우리가 수행한 3개 프로젝트에 대해서 지수형 분포 및 기하분포 등에 대한 소프트웨어 모듈의 크기 분포나 모듈 또는 tan 등 규정된 크기에서 포함하고 있는 결함수를 추정하고 실측데이터에 적합한 모델의 구성 가능성을 제안하여 시험기간 중에 관측된 데이터를 적용하여 이를 상호 비교한다.

• Structural Engineering and Mechanics
• /
• 제84권6호
• /
• pp.799-811
• /
• 2022

Adhesive bonding has seen rapid development in recent years, with emphasis to composite patch repairing processes of geometric defects in aeronautical structures. However, its use is still limited given its low resistance to climatic conditions and requirement of specialized labor to avoid fabrication induced defects, such as air bubbles, cracks, and cavities. This work aims to numerically analyze, by the finite element method, the failure behavior of a damaged plate, in the form of a bonding defect, and repaired by an adhesively bonded composite patch. The position and size of the defect were studied. The results of the numerical analysis clearly showed that the position of the defect in the adhesive layer has a large effect on the value of J-Integral. The reduction in the value of J-Integral is also related to the composite stacking sequence which, according to the mechanical properties of the ply, provides better load transfer from the plate to the repair piece through the adhesive. In addition, the increase in the applied load significantly affects the value of the J-Integral at the crack tip in the presence of a bonding defect, even for small dimensions, by reducing the load transfer.

• Archives of Reconstructive Microsurgery
• /
• 제25권1호
• /
• pp.7-11
• /
• 2016

Purpose: In recent decades, amputation is still recommended for patients with extensive lower extremity wounds requiring coverage. Although the feet contribute relatively little to total body surface area, they are essential organ for ambulation, and a high mortality rate after amputation has been reported. We report on 10 challenging cases of a mangled foot which was reconstructed using an anterolateral thigh (ALT) free flap, and analyze the advantages and disadvantages of this technique. Materials and Methods: This retrospective study was conducted on 10 patients who underwent reconstructive surgery on a foot. Patients' charts were reviewed for age, sex, causes, defect size and site, flap size and type, flap type, and complications. Cases with a defect size of > $100cm^2$ were included. Results: Seven of the 10 patients were male, and overall mean age was 38.5 years (range, 22 to 61 years). Mean defect size was $179.6cm^2$ (range, 104 to $330cm^2$), and mean flap size was $193cm^2$ (range, 120 to $408cm^2$). Three cases were reconstructed with a musculocutaneous free flap and seven cases were reconstructed with a fasciocutaneous free flap. There were two occurrences of local wound complication. All ten flaps survived well, however five patients underwent a debulking procedure to reduce flap volume. Conclusion: Reconstruction of a near completely degloved soft tissue defect or a wide defect containing two or more surfaces of extremity with an ALT free flap was performed. The purpose of this case study is to report on free tissue transfer using the ALT flap for salvage of the lower extremity.