• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.61-68
• /
• 2018

In general, defects cause a lot of maintenance costs and serious damage to various stakeholders, such as the owners, contractors or occupants of apartments. For this reason, a systematic and efficient defect management method is needed to minimize defect disputes. This paper derives a defect classification framework and proposes a defect risk assessment model for different types of defects. For this purpose, 6,000 defect items are allocated to the defect classification framework; these items are associated with 34 apartment projects over ten years old. As a result of this analysis, it was confirmed that the defect risks are concentrated in the areas of RC and finishing work. Based on these results, it is necessary to prevent the major risks of defects according to their priority. Based on this research, it is judged that further research to develop a method of managing the risks of defects may be necessary.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.510-519
• /
• 2019

The aim of this study was to set a defect classification framework and evaluate the defect risks in apartment buildings For this, approximately 15,056 defect items for 133 apartment buildings were examined. As a result of the analysis, the major defect of the RC work was cracks, which were found mainly in public locations. Moreover, the RC work was found to exhibit a high defect risk of water problem and surface appearance, which are highly connected with cracks. Second, the finish work has a high defect risk because it is composed of various work types, and there are many kinds of materials and construction parts involved. Third, the major defects of the waterproof work were incorrect installation and missing tasks, which have high defect risks in the garage. This is because defects that require rework occur mainly in the underground garage. Based on these results, this study proposed countermeasures for defect risk management to be considered in the construction, handover, post-handover, and occupancy phases. These have been set in detail based on the three zones: low frequency high severity (LFHS), low frequency low severity (LFLS), and high frequency low severity (HFLS).

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.27
• /
• pp.129-161
• /
• 2005

Todays, computers in business world are potent facilitators that most companies could not without them, while they are only tools. They offer extremely efficient means of communication, particularly when connected to Internet. What I stress in this article is the risks accompanied by e-commerce rather than the advantages of Internet or e-commerce. The management of e-commerce companies, therefore, should keep in mind that the benefit of e-commerce through the Internet are accompanied by enhanced and new risks, cyber risks or e-commerce risks. For example, companies are exposed to computer system breakdown and business interruption risks owing to traditional and physical risks such as theft and fire etc, computer programming errors and defect softwares and outsider's attack such as hacking and virus. E-commerce companies are also exposed to tort liabilities owing to defamation, the infringement of intellectual property such as copyright, trademark and patent right, negligent misrepresent and breach of confidential information or privacy infringement. In this article, I would like to suggest e-commerce insurance or cyber liability insurance as a means of risk management rather than some technical devices, because there is not technically perfect defence against cyber risks. But e-commerce insurance has some gaps between risks confronted by companies and coverage needed by them, because it is at most 6 or 7 years since it has been introduced to market. Nevertheless, in my opinion, e-commerce insurance has offered the most perfect defence against cyber risks to e-commerce companies up to now.

• International Commerce and Information Review
• /
• v.7 no.3
• /
• pp.27-51
• /
• 2005

Todays, computers in business world are potent facilitators that most companies could not without them, while they are only tools. They offer extremely efficient means of communication, particularly when connected to Internet. What I stress in this article is the risks accompanied by e-commerce rather than the advantages of Internet or e-commerce. The management of e-commerce companies, therefore, should keep in mind that the benefit of e-commerce through the Internet are accompanied by enhanced and new risks, cyber risks or e-commerce risks. For example, companies are exposed to computer system breakdown and business interruption risks owing to traditional and physical risks such as theft and fire etc, computer programming errors and defect softwares and outsider's attack such as hacking and virus. E-commerce companies are also exposed to tort liabilities owing to defamation, the infringement of intellectual property such as copyright, trademark and patent right, negligent misrepresent and breach of confidential information or privacy infringement. In this article, I would like to suggest e-commerce insurance or cyber liability insurance as a means of risk management rather than some technical devices, because there is not technically perfect defence against cyber risks. But e-commerce insurance has some gaps between risks confronted by companies and coverage needed by them, because it is at most 6 or 7 years since it has been introduced to market. Nevertheless, in my opinion, e-commerce insurance has offered the most perfect defence against cyber risks to e-commerce companies up to now.

• Journal of Korean Neurosurgical Society
• /
• v.53 no.5
• /
• pp.300-302
• /
• 2013

Reports of traumatic leptomeningeal cysts (TLMC) are rare in adults. The standard treatment approach is craniectomy with careful exposure of the intact dural edges, followed by duroplasty. However, occasionally, the location of the TLMC makes achieving watertight duroplasty impossible. Herein, we report the case of a 28-year-old male who presented with a soft growing mass on the vertex of his head 16 months after the head trauma. Upon enhanced CT examination, a bony defect involving both the inner and outer table of the cranium was observed close to the sagittal sinus, and a well-defined cystic mass, 5 cm in diameter, was nested within the defect. The risks associated with extension craniotomy were high because the lesion was located superficial to the sagittal sinus, we opted to use fibrinogen-based collagen fleece (TachoCombR$^{(R)}$) to repair the dural defect. Two months after surgery, the patient remained asymptomatic with a good cosmetic result. In cases like ours, when the defect is near the major sinuses and the risk of rupturing the sinus during watertight dural closure is high, fibrinogen-based collagen fleece (TachoCombR$^{(R)}$) is an effective alternative approach to standard dural suture techniques.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.4
• /
• pp.34-42
• /
• 2018

Apartment is a typical type of housing preferred by the majority of people. However, and defect disputes occur because various defects such as cracks, subsidence, breakage, water leakage, dew condensation and dropout are confirmed with numerous structures and finishing materials. From this point of view, this paper analyzes defect frequency and costs of each warranty period by work types, and estimates defect risks by using defect dispute cases. It examined about 5,337 defect items for 32 apartment over ten years old. In this paper, there are 10 types of work types and the warranty liability period is divided into 6 categories. Based on these categories, defect frequency and costs are investigated, and finally defect risk of the warranty liability period by work types confirmed. As a result of this analysis, it was found that defect risk in RC and finishing work is very high. Especially the RC work revealed that there is a high risk of trying from the third year onwards and it was found that the defect risk up to the second year is high in the finishing work. Due to aging of RC structure, the defect risk gradually increases, and finishing work initially cause defect disputes because of the housing environment.

• Journal of Applied Reliability
• /
• v.15 no.3
• /
• pp.176-180
• /
• 2015

A defect on the product safety display is defined by a failure to prevent the damage caused by the inappropriate explanation, direction, and caution to warn the users of the related risks. In other words, it lacks the sufficient instructions or caution for proper use and is unable to furnish the possible danger of the product and the instructions to deal with it. The defect is the responsibility of the manufacturers who are supposed to provide the adequate information so as to prevent injuries of the users. However, in order to prove the product safety display defective, there should be a comprehensive consideration in many different ways such as social norms (such as property and expectation of the product), usage form, indication of the expected risk, and awareness of consumer about the harm and possibility of avoidance of danger. The purpose of this research is to propose the content and types of standardized indication of safety in the industrial product by collecting and analyzing domestic safety information.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.131-132
• /
• 2022

The type and proportion of construction work varies depending on the stage of progress, and the frequency of inspection and defect occurrences are different. If it is determined to be defective after the inspection, a delay may occur, and additional manpower and resources are required. Therefore, it is necessary to prevent these risks by classifying, deriving, and managing key management woks according to the progress. This study aims to contribute to the efficiency of the supervisor's inspection work by identifying the types of construction that should be managed intensively for each construction progress and deriving the time when defects occur frequently in each construction type.

• Archives of Plastic Surgery
• /
• v.33 no.6
• /
• pp.748-752
• /
• 2006

Purpose:Circular skin lesions between 10 and 35 mm in diameter generate problems often. Direct closure of the lesion risks excessive wound tension or wound dehiscence. Skin grafts heal slowly and often remain unsightly. Traditional skin flaps have a limited role. We treated this circular medium-sized skin lesion(10 - 35 mm sized) by reducing opposed multilobed(ROM) flap. Methods: ROM flap involves a series of semicircular lobes extending both cephalic and caudal from the defect. Direction of the semicircular multilobed flap is set parallel to relaxed skin tension line(RSTL) to minimize scar formation. First semicircle is drawn 60% in diameter of the defect. Second semicircles are drawn at the cephalic and caudal aspects of the original semicircles. These semicircles are 60% in diameter of the first semicircle. Additional semicircles are repeatedly drawn until the tension of skin flaps becomes free. ROM flap has a length-to-base ratio of 0.5 resulting in lower theoretical risk of end flap necrosis than a random pattern flap with a large ratio. The technique involves lobes most distant from the primary defect being transposed in turn closer to the defect. Results: The ROM flap reduces skin tension concerns, lowers the risk of flap necrosis and allows for quicker and more aesthetic healing. Results were generally good and major complications, such as dehiscence, infection, or delayed healing, did not occur. Conclusion: ROM flap repair allows the plastic surgeon an additional option when faced with a circular medium-sized skin lesion.

• The KIPS Transactions:PartD
• /
• v.16D no.1
• /
• pp.105-112
• /
• 2009

Risk management is increasingly seen as one of the main jobs of project managers. It involves anticipating risks that might affect the project schedule or the quality of the software being developed and taking action to avoid these risks. The results of the risk analysis should be documented in the project plan along with an analysis of the consequences of a risk occurring. Effective risk management makes it easier to cope with problems and to ensure that these do not lead to unacceptable budget or schedule slippage. This research provides criteria of analysis of risk items to the estimation of process milestone on software development. Also, In this paper propose to a fixed quantity and transition phase.