• Journal of Chest Surgery
• /
• 제49권3호
• /
• pp.190-194
• /
• 2016

Double outlet right ventricle (DORV) and transposition of the great arteries (TGA) with ventricular septal defect (VSD) and pulmonary stenosis (PS) are complex heart diseases, the treatment of which remains a surgical challenge. The Rastelli procedure is still the most commonly performed treatment. Aortic root translocation including an arterial switch operation is advantageous anatomically since it has a lower possibility of conduit blockage and the left ventricle outflow tract remains straight. This study reports successful aortic root transpositions in two patients, one with DORV with VSD and PS and one with TGA with VSD and PS. Both patients were discharged without postoperative complications.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권5호
• /
• pp.198-205
• /
• 2005

Many precedent investigations hate been made for the reliable assessment of the insulation state of large power apparatus for which partial discharge detection is one of tile plausible way. In this work, experimental investigations have been carried out to make the comparison on the PD(partial discharge) pattern analysis related to the five different types of artificial defects such as SFMP (Single Free Moving Particle), MFMP (Multi Free Moving Particle), Void, CFP (Conductor-Fixed Protrusion), EP (Enclosure Protrusion). For each PD pattern, PD detection has been done by tee different types of PD sensors such as HFCT(High Frequency Current Transformer), AE(Acoustic Emission) and UHF(Ultra High Frequency). And, in addition, frequency spectrum by the UHF sensor has been also made for each defect respectively. As a result, it is observed that the possibility of obtaining PD pattern based on PRPD(Phase Resolved Partial Discharge) in connection with the defects tinder investigation is dependant on the type of the sensor while the spectrum analysis is always successful to be achieved for every defect. Therefore, it could be suggested that the nature of PD source can be identified more distinctively when the conventional PRPDA is combined with spectrum analysis.

• 대한두개안면성형외과학회지
• /
• 제17권4호
• /
• pp.233-236
• /
• 2016

Scalp defect management is complicated secondary to reduced laxity in the scalp and forehead area. For reconstruction of larger defects with exposed bone and loss of the periosteal layer, free flap reconstruction is one option for single-stage surgery, although the procedure is lengthy and includes the possibility of flap loss. We successfully performed a single-stage reconstruction of a large scalp defect using a combination of artificial dermis, split-thickness skin graft, and full-thickness skin graft following wide excision of a cutaneous angiosarcoma, and present our method as one option for the treatment of large oncologic surgical defects in patients who are poor candidates for free flap surgery.

• 한국전기전자재료학회논문지
• /
• 제24권11호
• /
• pp.876-881
• /
• 2011

The sintering, defect and grain boundary characteristics of Bi-based ZnO chip varistor (1,608 mm size) have been investigated to know the possibility of lowering a manufacturing price by using 100 % Ag inner-electrode. The samples were prepared by general multilayer chip varistor process and characterized by shrinkage, SEM, current-voltage (I-V), admittance spectroscopy (AS), impedance and modulus spectroscopy (IS & MS) measurement. There are no problems to make a chip varistor with 100% Ag inner-electrode in the sintering temperature range of 850~900$^{\circ}C$ for 1 h in air. A good varistor characteristics ($V_n$= 9.3~15.4 V, a= 23~24, $I_L$= 1.0~1.6 ${\mu}A$) were revealed but formed $Zn_i^{{\cdot}{\cdot}}$(0.209 eV) as dominant defect, and increased the distributional inhomogeneity and the temperature instability in grain boundary barriers.

• 대한기계학회논문집A
• /
• 제20권11호
• /
• pp.3387-3397
• /
• 1996

The Hub is an auto mobile component used as aircon clutch. The important aspects in cold forging of the Hub with complex geometry are the design of an initial shape of the workpiece, the possibility of the forming by one-stage operation and the determination of number of performs, etc. Based on the systematic procedure of process sequence design, in this paper, the forming operation of cold forged part of the Hub is designed by the rigid-plastic finite element method. The two design criterion of geometrical filling without defect and an even distribution of effective strain in final product are investigated in controlling the initial shape of the workpiece and preform configuration. It is noted that one preforming operation is required in order to obtain final product of the Hub.

• 산업기술연구
• /
• 제35권
• /
• pp.3-8
• /
• 2015

A study has been made on defects which are formed in manufacturing processes of engine bearing and also on fatigue crack growth behavior in each step of bearing metal manufacturing. After the first step(sinter brass powder on steel plate ; Series A) many voids are made on brass surface and its size is decreased by the second step(rolling process of sintered plate ; Series B). After the third step(re-sintering step of brass powder and rolling ; Series C) the number of voids is decreased and its type shows line. The time of fatigue crack initiation and the growth rate of fatigue crack are in order of Series A, Series B, Series C. These reasons are that void fosters the crack initiation and growth, and residual stress made by rolling process effects on the crack growth rate in Series B, C. In forming and machining processes by use of final bearing metal, crack was observed at internal corner of flange and peeling off was observed at junction between steel and brass. Owing to the above crack and peeling off, it is considered that there is a possibility of fatigue fracture during the application time.

• 한국기계가공학회지
• /
• 제15권4호
• /
• pp.60-66
• /
• 2016

This study used an ultrasound infrared thermography technique to detect issues in the motor core of typical power equipment. The current defect inspection method of the motor core is often incomplete (due to the limits of visual inspection) and thus the reliability of the motor core is reduced. Therefore, in this study, experiments were carried out to increase the reliability of the test by using an ultrasonic infrared thermal non-destructive inspection method to image the motor core. The ambient temperature of the experimental system was maintained at $25^{\circ}C$. Experiments were carried out to examine a damaged motor core and a defect-free motor core. Experimental results confirm the technique clearly detected defects in the motor core, thereby confirming the possibility of using this technique in the field.

• 소성∙가공
• /
• 제1권1호
• /
• pp.66-74
• /
• 1992

According to the variation of hydrostatic pressure on the central axis of deformable material, the V-shaped central bursting defect may be created in extrusion or drawing processes. The process factors which affect the generation of defects are semi-angle of die, reduction ratio of cross-sectional area, friction factor, material properties and so on. The combination of these factors can determine the possibility of defect creation and the shape of various round holes which have been created inside already. By the rigid plastic finite element method, this paper describes the observations of change in shape of round holes with process conditions such as semi-angle of die, reduction ratio of cross-sectional area and friction factor at the non-steady state of axisymmetrical extrusion process when the round hole is already existed inside the original billet. Also, the effects of process factors are investigated to prevent the possible defects.

• Journal of Yeungnam Medical Science
• /
• 제31권2호
• /
• pp.122-126
• /
• 2014

Coronary vasospasm is one of the fatal complications that may occur in patients undergoing open heart surgery. To date, however, there are not many cases in this series and no definite pathophysiology has been documented. We experienced a case of coronary artery vasospasm after atrial septal defect (ASD) surgery and then successfully treated it with both transbrachial intraaortic balloon pump and percutaneous cardiopulmonary support. Only several hours after ASD surgery, the patient exhibited the cardiovascular collapse, the ST-segment elevation, followed by ventricular fibrillation and normal coronary angiography findings. It is important to make a differential diagnosis of coronary artery vasospasm in patients presenting with ST-segment elevation who had no notable coronary artery diseases. This case indicates that clinicians should be aware of the possibility that the coronary artery vasospasm may also occur in patients undergoing ASD surgery.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1891-1894
• /
• 1999

We can classify the scratches after CMP process into micro-scratch and macro-scratches according to the scratch size, scratch intensity and defect map, etc. The micro-scratches on wafer after CMP process are discussed in this paper. From many causes, major factor that influences the formation of micro-scratch is known as particle size distribution of slurry.(1) It is indefinite what size or type of particle can cause micro-scratch on wafer surface, but there is possibility caused by large particle over 1um. The best way for controlling these large particle to inflow is to use the slurry filter on POU(Point of user). But the slurry filter(especially, depth-type filter) has sometimes the problem which makes more sever micro-scratches on wafer surface after CMP. We studied that depth-type slurry filter has what kind of week-points and the number of scratch could be reduced by lowering slurry flow rate and by using high spray bar which sprays DIW on polishing pad with high pressure.