• 전기전자학회논문지
• /
• 제25권2호
• /
• pp.356-361
• /
• 2021

파워 소자의 트레이드오프 현상을 최소화하기 위해 제시된 구조가 Super Junction 구조이다. Super Junction은 기존의 많이 사용하던 기본 구조 대비 1/5 정도의 낮은 온 저항(Ron) 특성을 가질 수 있다. Super Junction 구조의 공정 방법으로 Multi-Epi 공정과 Deep-Trench 공정 방법이 있다. Deep-Trench 공정은 실리콘 기판 상면에 깊은 트렌치 공정을 통하여 그안에 불순물이 도핑 되어 있는 폴리실리콘을 매립하여 P-Pillar를 형성 시키는 공정 방법이라 매립하는 과정에서 결함이 형성되기 쉬워서 비교적 어려운 제조 방법으로 알려져 있다. 하지만 비교적 Deep-Trench 공정으로 만들어진 구조가 낮은 온저항과 높은 항복 전압을 형성하여 좋은 효율을 보인다. 본 논문에서는 공정상의 새로운 방법을 제시하고, Charge Balance 이론을 접목시킨 구조를 설계하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.342-343
• /
• 2012

We studied the Drain-Induced-Barrier-Lowering (DIBL) effect by different drain engineering. One other drain engineering is symmetric source-drain n-channel MOSFETs (SSD NMOSs), the other drain engineering is asymmetric source-drain n-channel MOSFETs (ASD NMOSs). Devices were fabricated using state of art 40 nm dynamic-random-access-memory (DRAM) technology. These devices have different modes which are deep drain junction mode in SSD NMOSs and shallow drain junction mode in ASD NMOSs. The shallow drain junction mode means that drain is only Lightly-Doped-Drain (LDD). The deep drain junction mode means that drain have same process with source. The threshold voltage gap between low drain voltage ($V_D$=0.05V) and high drain voltage ($V_D$=3V) is 0.088V in shallow drain junction mode and 0.615V in deep drain junction mode at $0.16{\mu}m$ of gate length. The DIBL coefficients are 26.5 mV/V in shallow drain junction mode and 205.7 mV/V in deep drain junction mode. These experimental results present that DIBL effect is higher in deep drain junction mode than shallow drain junction mode. These results are caused that ASD NMOSs have low drain doping level and low lateral electric field.

• 한국전기전자재료학회논문지
• /
• 제25권4호
• /
• pp.270-275
• /
• 2012

Power MOSFET(metal oxide silicon field effect transistor) operate voltage-driven devices, design to control the large power switching device for power supply, converter, motor control, etc. But on-resistance characteristics depending on the increasing breakdown voltage spikes is a problem. So 600 V planar power MOSFET compare to 1/3 low on-resistance characteristics of super junction MOSFET structure. In this paper design to 600 V planar MOSFET and super junction MOSFET, then improvement of comparative analysis breakdown voltage and resistance characteristics. As a result, super junction MOSFET improve on about 40% on-state voltage drop performance than planar MOSFET.

• 한국전기전자재료학회논문지
• /
• 제33권4호
• /
• pp.263-270
• /
• 2020

In this study, the physical mechanism and diffusion effects in aluminium implanted silicon was investigated. For fabricating power semiconductor devices, an aluminum implantation can be used as an emitter and a long drift region in a power diode, transistor, and thyristor. Thermal treatment with O₂ gas exhibited to a remarkably deeper profile than inert gas with N₂ in the depth of junction structure. The redistribution of aluminum implanted through via thermal annealing exhibited oxidation-enhanced diffusion in comparison with inert gas atmosphere. To investigate doping distribution for implantation and diffusion experiments, spreading resistance and secondary ion mass spectrometer tools were used for the measurements. For the deep-junction structure of these experiments, aluminum implantation and diffusion exhibited a junction depth around 20 ㎛ for the fabrication of power silicon devices.

• 전기전자학회논문지
• /
• 제11권4호
• /
• pp.235-238
• /
• 2007

2차원 소자 시뮬레이터인 TMA 메디치를 이용하여 필드링와 깊은 접합 필드링에 대해 연구하였다. 이온 주입될 위치를 미리 트랜치 식각을 시킴으로써 항복전압 특성을 향상시킬 수 있었다. 시뮬레이션 결과 기존 필드링의 항복전압대비 깊은 접합 필드링 항복전압은 약 30%의 증가를 보였다. 깊은 접합 필드링은 같은 면적을 차지하는 조건하에서 설계 및 제작이 비교적 용이하고, 표면 전하의 영향도 적은 것으로 나타났다. 본 논문에서는 여러 분석을 통해 깊은 접합 필드링의 향상된 특성을 논하였다.

• Journal of Korean Neurosurgical Society
• /
• 제40권2호
• /
• pp.117-121
• /
• 2006

The surgical removal of solid deep-seated hemangioblastomas remains challenging, because treatment of these lesions is often complicated by severe bleeding associated with the rich vascularity of this tumor, and by severe neural tissue injury associated with the difficulty of en bloc resection, especially when the tumor is located at the cervicomedullary junction. Therefore, preoperative embolization of deep-seated solid hemangioblastomas may play an important role in successful surgical removal by reducing major bleeding and neural tissue damage. A 24-year-old woman, 28-weeks pregnant, was admitted to our hospital for the evaluation of quadriparesis, and brain magnetic resonance imaging[MRI] revealed intra-axial mass lesion in the cervicomedullary junction. After delivery, her neurologic symptoms became aggravated, and we decided to operate. Preoperative angiography revealed a hypervascular tumor in the posterior fossa, and embolization of the main feeding artery using gelfoam and microcoil, resulted in marked reduction of tumor vascularity. She underwent a midline suboccipital craniotomy involving the removal of the arch of C-1. The tumor was totally removed through a midline myelotomy, and at her 6-month follow-up she walked independently. We report on the combined use of the preoperative embolization of feeding vessels and subsequent operative resection in a patient with a solid hemangioblastoma at the cervicomedullary junction immediately after delivery.

• Applied Microscopy
• /
• 제50권
• /
• pp.17.1-17.9
• /
• 2020

Recent advances in fabrication have enabled radial-junction architectures for cost-effective and high-performance optoelectronic devices. Unlike a planar PN junction, a radial-junction geometry maximizes the optical interaction in the three-dimensional (3D) structures, while effectively extracting the generated carriers via the conformal PN junction. In this paper, we report characterizations of radial PN junctions that consist of p-type Si micropillars created by deep reactive-ion etching (DRIE) and an n-type layer formed by phosphorus gas diffusion. We use electron-beam induced current (EBIC) microscopy to access the 3D junction profile from the sidewall of the pillars. Our EBIC images reveal uniform PN junctions conformally constructed on the 3D pillar array. Based on Monte-Carlo simulations and EBIC modeling, we estimate local carrier separation/collection efficiency that reflects the quality of the PN junction. We find the EBIC efficiency of the pillar array increases with the incident electron beam energy, consistent with the EBIC behaviors observed in a high-quality planar PN junction. The magnitude of the EBIC efficiency of our pillar array is about 70% at 10 kV, slightly lower than that of the planar device (≈ 81%). We suggest that this reduction could be attributed to the unpassivated pillar surface and the unintended recombination centers in the pillar cores introduced during the DRIE processes. Our results support that the depth-dependent EBIC approach is ideally suitable for evaluating PN junctions formed on micro/nanostructured semiconductors with various geometry.

• 한국진공학회지
• /
• 제17권6호
• /
• pp.555-559
• /
• 2008

순방향 전압-온도 (forward voltage-temperature)법을 이용하여 양자점 레이저 다이오드의 접합온도를 측정하였다. 식각 깊이가 깊은 mesa 구조의 경우 입력전류에 대한 접합온도의 증가율은 0.05 K/mA인 반면, 식각 깊이가 낮은 mesa 구조의 경우 0.07 K/mA로서 상대적으로 높게 측정되었다. 깊은 mesa 구조에서의 상대적으로 낮은 접합온도 증가율은 mesa 측면 방향으로의 열확산 효과 때문인 것으로 설명된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.562-565
• /
• 2001

In this paper, novel device structures in order to realize ultra fast and ultra small silicon devices are investigated using ultra-high vacuum chemical vapor deposition(UHVCVD) and Excimer Laser Annealing (ELA). Based on these fundamental technologies for the deep sub-micron device, high speed and low power devices can be fabricated. These junction formation technologies based on damage-free process for replacing of low energy ion implantation involve solid phase diffusion and vapor phase diffusion. As a result, ultra shallow junction depths by ELA are analyzed to 10~20nm for arsenic dosage(2${\times}$10$\_$14//$\textrm{cm}^2$), exciter laser source(λ=248nm) is KrF, and sheet resistances are measured to 1k$\Omega$/$\square$ at junction depth of 15nm and realized sub-50nm n-MOSFET.

• The Journal of Korean Physical Therapy
• /
• 제14권4호
• /
• pp.163-171
• /
• 2002

Neuromuscular junction consist of presynaptic membrane, synaptic cleft and postsynaptic membrane. In the neuromuscular junction, presynaptic membrane is the motor nerve terminal, have many synaptic vesicle. Postsynaptic membrane is the motor end plate of muscle fiber and the most striking structural features are the deep infolding of the sarcolemma. Between the nerve and muscle cells, there is a synaptic cleft of some 50-100nm. This review shows the ultrastructure and function of neuromuscular junction, summarizes the current knowledge.