• Journal of IKEEE
• /
• v.25 no.2
• /
• pp.356-361
• /
• 2021

Super Junction structure is the proposed structure to minimize the Trade-off phenomenon of power devices. Super Junction can have On-resistance(Ron) characteristics as less as five times than conventional structure. There are process methods that Multi-Epi and Deep-Trench of Super Junction structure. The reason for this is that Deep-Trench process is known to be a relatively difficult manufacturing method because it is easy to form a P-Pillar by burying impurities on top of a silicon substrate through a Deep-Trench process. However, the structure created by the Deep-Trench process has low On-resistance and high breakdown voltage, showing better efficiency. In this paper, we suggested a novel method in the process and designed structure with Charge Balance theory.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.342-343
• /
• 2012

We studied the Drain-Induced-Barrier-Lowering (DIBL) effect by different drain engineering. One other drain engineering is symmetric source-drain n-channel MOSFETs (SSD NMOSs), the other drain engineering is asymmetric source-drain n-channel MOSFETs (ASD NMOSs). Devices were fabricated using state of art 40 nm dynamic-random-access-memory (DRAM) technology. These devices have different modes which are deep drain junction mode in SSD NMOSs and shallow drain junction mode in ASD NMOSs. The shallow drain junction mode means that drain is only Lightly-Doped-Drain (LDD). The deep drain junction mode means that drain have same process with source. The threshold voltage gap between low drain voltage ($V_D$=0.05V) and high drain voltage ($V_D$=3V) is 0.088V in shallow drain junction mode and 0.615V in deep drain junction mode at $0.16{\mu}m$ of gate length. The DIBL coefficients are 26.5 mV/V in shallow drain junction mode and 205.7 mV/V in deep drain junction mode. These experimental results present that DIBL effect is higher in deep drain junction mode than shallow drain junction mode. These results are caused that ASD NMOSs have low drain doping level and low lateral electric field.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.4
• /
• pp.270-275
• /
• 2012

Power MOSFET(metal oxide silicon field effect transistor) operate voltage-driven devices, design to control the large power switching device for power supply, converter, motor control, etc. But on-resistance characteristics depending on the increasing breakdown voltage spikes is a problem. So 600 V planar power MOSFET compare to 1/3 low on-resistance characteristics of super junction MOSFET structure. In this paper design to 600 V planar MOSFET and super junction MOSFET, then improvement of comparative analysis breakdown voltage and resistance characteristics. As a result, super junction MOSFET improve on about 40% on-state voltage drop performance than planar MOSFET.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.4
• /
• pp.263-270
• /
• 2020

In this study, the physical mechanism and diffusion effects in aluminium implanted silicon was investigated. For fabricating power semiconductor devices, an aluminum implantation can be used as an emitter and a long drift region in a power diode, transistor, and thyristor. Thermal treatment with O₂ gas exhibited to a remarkably deeper profile than inert gas with N₂ in the depth of junction structure. The redistribution of aluminum implanted through via thermal annealing exhibited oxidation-enhanced diffusion in comparison with inert gas atmosphere. To investigate doping distribution for implantation and diffusion experiments, spreading resistance and secondary ion mass spectrometer tools were used for the measurements. For the deep-junction structure of these experiments, aluminum implantation and diffusion exhibited a junction depth around 20 ㎛ for the fabrication of power silicon devices.

• Journal of IKEEE
• /
• v.11 no.4
• /
• pp.235-238
• /
• 2007

The planar edge termination techniques of field-ring and deep junction field-ring were investigated and optimized using a two-dimensional device simulator TMA MEDICI. By trenching the field ring site which would be implanted, a better blocking capability can be obtained. The results show that the p-n junction with deep junction field-ring can accomplish near 30% increase of breakdown voltage in comparison with the conventional field-rings. The deep junctionfield-rings are easy to design and fabricate and consume same area but they are relatively sensitive to surface charge. Extensive device simulations as well as qualitative analyses confirm these conclusions.

• Journal of Korean Neurosurgical Society
• /
• v.40 no.2
• /
• pp.117-121
• /
• 2006

The surgical removal of solid deep-seated hemangioblastomas remains challenging, because treatment of these lesions is often complicated by severe bleeding associated with the rich vascularity of this tumor, and by severe neural tissue injury associated with the difficulty of en bloc resection, especially when the tumor is located at the cervicomedullary junction. Therefore, preoperative embolization of deep-seated solid hemangioblastomas may play an important role in successful surgical removal by reducing major bleeding and neural tissue damage. A 24-year-old woman, 28-weeks pregnant, was admitted to our hospital for the evaluation of quadriparesis, and brain magnetic resonance imaging[MRI] revealed intra-axial mass lesion in the cervicomedullary junction. After delivery, her neurologic symptoms became aggravated, and we decided to operate. Preoperative angiography revealed a hypervascular tumor in the posterior fossa, and embolization of the main feeding artery using gelfoam and microcoil, resulted in marked reduction of tumor vascularity. She underwent a midline suboccipital craniotomy involving the removal of the arch of C-1. The tumor was totally removed through a midline myelotomy, and at her 6-month follow-up she walked independently. We report on the combined use of the preoperative embolization of feeding vessels and subsequent operative resection in a patient with a solid hemangioblastoma at the cervicomedullary junction immediately after delivery.

• Applied Microscopy
• /
• v.50
• /
• pp.17.1-17.9
• /
• 2020

Recent advances in fabrication have enabled radial-junction architectures for cost-effective and high-performance optoelectronic devices. Unlike a planar PN junction, a radial-junction geometry maximizes the optical interaction in the three-dimensional (3D) structures, while effectively extracting the generated carriers via the conformal PN junction. In this paper, we report characterizations of radial PN junctions that consist of p-type Si micropillars created by deep reactive-ion etching (DRIE) and an n-type layer formed by phosphorus gas diffusion. We use electron-beam induced current (EBIC) microscopy to access the 3D junction profile from the sidewall of the pillars. Our EBIC images reveal uniform PN junctions conformally constructed on the 3D pillar array. Based on Monte-Carlo simulations and EBIC modeling, we estimate local carrier separation/collection efficiency that reflects the quality of the PN junction. We find the EBIC efficiency of the pillar array increases with the incident electron beam energy, consistent with the EBIC behaviors observed in a high-quality planar PN junction. The magnitude of the EBIC efficiency of our pillar array is about 70% at 10 kV, slightly lower than that of the planar device (≈ 81%). We suggest that this reduction could be attributed to the unpassivated pillar surface and the unintended recombination centers in the pillar cores introduced during the DRIE processes. Our results support that the depth-dependent EBIC approach is ideally suitable for evaluating PN junctions formed on micro/nanostructured semiconductors with various geometry.

• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.555-559
• /
• 2008

Junction temperature of quantum dot laser diodes is investigated by utilizing forward voltage-temperature method. In the case of ridge type laser diodes with deep mesa the increasing rate of junction temperature to current is about 0.05 K/mA, while in the case of shallow mesa the increasing rate is about 0.07 K/mA. It is explained that the relatively low increasing rate in the deep mesa results from the heat expansion to the lateral direction of mesa.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.562-565
• /
• 2001

In this paper, novel device structures in order to realize ultra fast and ultra small silicon devices are investigated using ultra-high vacuum chemical vapor deposition(UHVCVD) and Excimer Laser Annealing (ELA). Based on these fundamental technologies for the deep sub-micron device, high speed and low power devices can be fabricated. These junction formation technologies based on damage-free process for replacing of low energy ion implantation involve solid phase diffusion and vapor phase diffusion. As a result, ultra shallow junction depths by ELA are analyzed to 10~20nm for arsenic dosage(2${\times}$10$\_$14//$\textrm{cm}^2$), exciter laser source(λ=248nm) is KrF, and sheet resistances are measured to 1k$\Omega$/$\square$ at junction depth of 15nm and realized sub-50nm n-MOSFET.

• The Journal of Korean Physical Therapy
• /
• v.14 no.4
• /
• pp.163-171
• /
• 2002

Neuromuscular junction consist of presynaptic membrane, synaptic cleft and postsynaptic membrane. In the neuromuscular junction, presynaptic membrane is the motor nerve terminal, have many synaptic vesicle. Postsynaptic membrane is the motor end plate of muscle fiber and the most striking structural features are the deep infolding of the sarcolemma. Between the nerve and muscle cells, there is a synaptic cleft of some 50-100nm. This review shows the ultrastructure and function of neuromuscular junction, summarizes the current knowledge.