• Tuberculosis and Respiratory Diseases
• /
• v.42 no.6
• /
• pp.913-922
• /
• 1995

Background: When we define the pressure of pulmonary vasculature in which a recruitment of blood flow occurs as $P_I$ and the proportion of change in pulmonary artery to that in cardiac output as IR and then we compare PI and IR with pulmonary vascular resistance, we would find some problems in pulmonary vascular resistance. In other words, it is the theory that, IR should be increased mainly in pulmonary embolism in which decreases the cross sectional area of pulmonary vasculature. But there are many contradictory reports resulted from various researches and the fact is known widely that any difference exists between PVR and PI, IR. For this reason, the purpose of this study is to observe how PI and IR change at the time of the outbreak and during treatment of the pulmonary embolism, and to find out the meaning of these new indicators and the difference from the pulmonary vascular resistance used generally when we subdivide the pulmonary vascular resistance into PI and IR. Method: After making AV fistula in experimental dog, we controlled cardiac output at the intervals of 15 minute in case of three kinds(all AV fistula are obstructed, only one of fistula is open and all of fistula is open), and after evoking massive pulmonary embolism with radioactive autologous blood clots, we measured the mean pulmonary artery pressure, and calculated PI and IR. We observed the pattern of change in PI and IR, without giving the control group any specific treatment and with injecting intravenously rtPA in the Group 1 and Group 2 at the dose of 1mg per kg, for 15 minutes fot the former and 3 hours for the latter. Result: 1) Pulmonary vascular resistance showed a change similar to that of pulmonary artery pressure and in all three group, PVR increased significantly, but group 1 and group 2 showed tendency that PVR keeps on decreasing after treatment, and the rate of decrease in group 1 is more rapid than group 2 significantly. 2) Both intersection(PI) and degree(IR) are proved statistically significant, in view of the straight line relationship between cardiac output and pulmonary artery pressure, calculated by minimal regression method. 3) PI changed similarly to pulmonary vascular resistance, while in the IR which is theoretically more similar to PVR, there was no significant difference or change after rtPA infusion. Conclusion: In the pulmonary embolism, Both change in IR which means real resistance of pulmonary vasculature and PI which was developed due to secondary vasoconstriction by pulmonary embolism are reflected same time.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.137-147
• /
• 2008

Statement of problem: Dental implant procedure has been recognized as a very effective treatment to rehabilitate fully or partially edentulous patients. However, mechanical failures such as screw loosening, screw fracture have been still reported frequently. Purpose: The purpose of this study was to evaluate the influence of tungsten carbide/carbon coating, which has superior hardness and frictional wear resistance, on implant-abutment screw loosening of three different joint connections after one million cyclic loading. Material and methods: The values of detorque before and after loading were measured in three different joint connections (Osstem Implant, Korea), one external butt joint, US II implant system and two internal cones, SS II and GS II system. The values of detorque before loading was analyzed by one-way ANOVA, and two-way ANOVA and Scheffe' test were performed for the value of detorque after loading. Results: 1. The values of initial detorque of tungsten carbide/carbon coated Ti alloy screw were smaller those of Ti alloy screw (P<.01), and there were no differences among implant systems in each screw (P>.05). 2. In comparison of loss rate of detorque value after cyclic loading, US II system was greater than SS II and GS II system but there was no difference between SS II and GS II system (P<.01). 3. Loss rates of detorque value after cyclic loading decreased consistently at tungsten carbide/carbon coated Ti alloy screw comparing with Ti alloy screw in all implant systems (P<.01), and there were no differences among three systems in reduction of loss rates by using tungsten carbide/carbon coated Ti alloy screw (P>.05). Conclusion: Tungsten carbide/carbon coating to increase preload with reduction of friction resistance was a effective way to decrease screw loosening by functional loading.

• Journal of Wetlands Research
• /
• v.21 no.4
• /
• pp.384-391
• /
• 2019

Nutrients in stormwater runoff have raised concerns regarding water quality degradation in the recent years. Low impact development (LID) technologies are types of nature-based solutions developed to address water quality problems and restore the predevelopment hydrology of a catchment area. Two LID facilities, infiltration trench (IT) and infiltration planter (IP), are known for their high removal rate of nutrients through sedimentation and vegetation. Long-term monitoring was conducted to assess the performance and cite the advantages and disadvantages of utilizing the facilities in nutrient removal. Since a strong ionic bond exists between phosphorus compounds and sediments, reduction of total phosphorus (TP) (more than 76%), in both facilities was associated to the removal of total suspended solids (TSS) (more than 84%). The efficiency of nitrogen in IP is 28% higher than IT. Effective nitrification occurred in IT and particulate forms of nitrogen were removed through sedimentation and media filters. Decrease in ammonium- nitrogen (NH₄-N) and nitrite-nitrogen (NO₂-N), and increase in nitrate-nitrogen (NO₃-N) fraction forms indicated that effective nitrification and denitrification occurred in IP. Hydrologic factors such as rainfall depth and rainfall intensity affected nutrient treatment capabilities of urban stormwater LID facilities The greatest monitored rainfall intensity of 11 mm/hr for IT yielded to 34% and 55% removal efficiencies for TN and TP, respectively, whereas, low rainfall intensities below 5 mm resulted to 100 % removal efficiency. The greatest monitored rainfall intensity for IP was 27 mm/hr, which still resulted to high removal efficiencies of 98% and 97% for TN and TP, respectively. Water quality assessment showed that both facilities were effective in reducing the amount of nutrients; however, IP was found to be more efficient than IT due to its additional provisions for plant uptake and larger storage volume.

• Food Science and Preservation
• /
• v.23 no.7
• /
• pp.1050-1057
• /
• 2016

This study was carried out to investigate the effectiveness of Leuconostoc mesenteroides isolated from octopus baechu kimchi as a potential starter for seafood kimchi. L. mesenteroides is lactic acid bacterium currently used as a starter for kimchi production. We selected the most effective L. mesenteroides strain from the 7 strains isolated from octopus baechu kimchi and, based on biochemical properties and 16S rRNA sequencing, identified the selected strain as L. mesenteroides SK-1. The SK-1 strain exhibited acid-tolerance, good survival capacity, and excellent dextran productivity. We investigated the effects the SK-1 of starter on seafood kimchi fermentation. Octopus baechu kimchi was fermented with L. mesenteroides SK-1 at $4^{\circ}C$ for 35 d. The decrease in pH and increase in acidity in octopus baechu kimchi fermented with the SK-1 starter occurred more quickly than that in the control kimchi indicating that. Octopus baechu kimchi with SK-1 starter has a relatively slow rate of increase in lactic acid production. As a result, octopus baechu kimchi prepared with L. mesenteroides SK-1 can be maintained at a suitable ripening degree over an extended period of time compared to that of the control kimchi, Moreover, the octopus baechu kimchi started with L. mesenteroides SK-1 has excellent sensory properties, including a refreshing taste, and a weak sour odor.

• Journal of Life Science
• /
• v.26 no.6
• /
• pp.663-672
• /
• 2016

The Cnidium monnieri (L.) Cusson is an annual plant distributed in China and Korea. The fruit of C. monnieri is used as a medicinal herb that is effective for the treatment of carbuncle and pain in female genitalia. However, the anti-cancer effects of CME have not yet been reported. In this study, we assessed the apoptotic effects and cell cycle arrest effects of ethanol extracts from C. monnieri on HCT116 colon cancer cells. The results of an MTT assay and LDH assay demonstrated a decrease in cell viability and the cytotoxic effects of CME. In addition, the number of apoptotic body and the apoptotic rate were increased in a dose-dependent manner through Hoechst 33342 staining and Annexin V-PI double staining. In addition, cell cycle arrest occurred at the G1 phase by CME. Protein kinase B (Akt) plays an important role in cancer cell survival, growth, and division. Akt down-regulates apoptosis-mediated proteins, such as mammalian target of rapamycin (mTOR), p53, and Glycogen Synthase kinase-3β (GSK-3β). CME could regulate the expression levels of p-Akt, p-mTOR, p-GSK-3β, Bcl-2 family members, caspase-3, and PARP. Furthermore, treatment with CME, LY294002 (PI3K/Akt inhibitor), BIO (GSK-3β inhibitor), and Rapamycin (mTOR inhibitor) showed that apoptotic effects occurred through the regulation of the AKT/mTOR/GSK-3β signaling pathway. Our results demonstrated CME could induce apoptosis and cell cycle arrest in HCT116 colon cancer cells.

• Journal of Life Science
• /
• v.22 no.10
• /
• pp.1295-1306
• /
• 2012

A microorganism producing carboxymethylcellulase (CMCase) was isolated from seawater and identified as Bacillus atrophaeus. This species was designated as B. atrophaeus LBH-18 based on its evolutionary distance and the phylogenetic tree resulting from 16S rDNA sequencing and the neighbor-joining method. The optimal conditions for rice bran (68.1 g/l), peptone (9.1 g/l), and initial pH (7.0) of the medium for cell growth was determined by Design Expert Software based on the response surface method; conditions for production of CMCase were 55.2 g/l, 6.6 g/l, and 7.1, respectively. The optimal temperature for cell growth and the production of CMCase by B. atrophaeus LBH-18 was $30^{\circ}C$. The optimal conditions of agitation speed and aeration rate for cell growth in a 7-l bioreactor were 324 rpm and 0.9 vvm, respectively, whereas those for production of CMCase were 343 rpm and 0.6 vvm, respectively. The optimal inner pressure for cell growth and production of CMCase in a 100-l bioreactor was 0.06 MPa. Maximal production of CMCase under optimal conditions in a 100-l bioreactor was 127.5 U/ml, which was 1.32 times higher than that without an inner pressure. In this study, rice bran was developed as a carbon source for industrial scale production of CMCase by B. atrophaeus LBH-18. Reduced time for the production of CMCase from 7 to 10 days to 3 days by using a bacterial strain with submerged fermentation also resulted in increased productivity of CMCase and a decrease in its production cost.

• Korean Journal of Microbiology
• /
• v.28 no.3
• /
• pp.219-228
• /
• 1990

A kanamycin resistance($Km^r$) gene was studied for its transfer in natural freshwater environments by using the natural bacterial isolate(M1) of DK1 and the DKC601 strain, $Km^r$ plasmid of which was genetically engineered from the NI strain. The transfer frequency ofthe $Km^r$ gene and rearrangement of the $Km^r$ plasmid were compared between the gnetically engineered microorganism(GEM) and the NI parental strain by conjugation with the same recipient strain. The transfer frequency of the $Km^r$ gene was about $9.1\times 10^{-12}-1.8\times 10^{-11}$ in both the GEM and NI strains at 5 to $10^{\circ}C$, but the frequency of the NI was about 10 times higher than that of the GEM at 20 to $30^{\circ}C$. The $Km^r$ plasmid in the transconjugants obtained by conjugation of the NI with the MY1 strain as a ricipient showed alot of rearrangement, but the $Km^r$ plasmid transferred from the GEM was stable without alteration of its size. When the MT2 strain was used as a recipient, however, such a rearrangement of the $Km^r$ plamid was observed in the transconjugants obtained from the GEM as well as the NI strain. In those transconjugants obtained from different mating pairs and water environments, the plasmid were appeared to decrease in their number as the period of conjugation time was prolonged, but only the $Km^r$ plasmid transferred from the GEM kept having its size of 52kb. Therefore, the $Km^r$ gene was transferred at the same rate from the GEM and NI strains in natural freshwater environment, but the gene of the GEM strain was more stable than the NIduring conjugation and the $Km^r$ plasmid was rearranged by changing the recipient strain for conjugation in any water environments.

• Sleep Medicine and Psychophysiology
• /
• v.5 no.1
• /
• pp.45-53
• /
• 1998

Objectives : The change of sleep patterns commonly occurs in association with the pregnancy. This study was to investigate sleep habits during the course of normal pregnancy. Methods : Sleep habits questionnaire was administered to healthy women in their first trimester(TR1) of pregnancy and then the same questionnaire was repeatedly administered during their second(TR2) and third(TR3) trimesters. The following aspects were assessed : patterns of night sleep, daytime status, sleep posture, reasons for sleep alteration, and the experience of any particular parasomnias, as well as sleep problem-related treatment or medication. Data analysis was based on 26 women who maintaind good health throughout their pregnancy and completed the questionnaire three times. Results : In comparisons between each trimester and non-pregnant state, total night sleep time, daytime tiredness, and sleepiness were significantly increased in all trimesters. Sleep latency was significantly decreased in TR1 and TR2, but not in TR3. In addition, refreshed feeling on waking the following day was significantly decreased and the number of awakenings during night sleep was significantly increased in TR3, but not in TR1 and TR2. In comparisons between trimesters, there was a significant increase in sleep latency, daytime sleepiness and the number of awakenings during night sleep and a significant decrease in refreshed feeling on waking the following day in TR3 compared to TR1 and TR2. Over the course of pregnancy, the rate of lateral position during sleep was gradually increased and all the pregnant women took the lateral sleeping posture in TR3. The major reasons for sleep pattern alteration were nausea, vomiting and heartburn in TR1, urinary frequency, fetal movement and ache in hips in TR2, and urinary frequency, fetal movement, cramp in legs and backache in TR3. Conclusion : These findings are expected to be useful for educating pregnant women about sleep hygiene. In future studies, the underlying factors and mechanisms regarding sleep patterns during pregnancy will need to be clarified.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.447-457
• /
• 2008

Laboratory tests for single plane sliding were conducted using the model rock slope to investigate the cut slope deformability and failure mechanism due to combined effect of engineering characteristics such as angle of sliding plane, water force, joint roughness and infillings. Also the possibility of prediction of slope failure through displacement monitoring was explored. The joint roughness was prepared in forms of saw-tooth type having different roughness specifications. The infillings was maintained between upper and lower roughness plane from zero to 1.2 times of the amplitude of the surface projections. Water force was expressed as the percent filling of tension crack from dry (0%) to full (100%), and constantly increased from 0% at the rate of 0.5%/min and 1%/min upto failure. Total of 50 tests were performed at sliding angles of $30^{\circ}$ and $35^{\circ}$ based on different combinations of joint roughness, infilling thickness and water force increment conditions. For smooth sliding plane, it was found that the linear type of deformability exhibited irrespective of the infilling thickness and water force conditions. For sliding planes having roughness, stepping or exponential types of deformability were predominant under condition that the infilling thickness is lower or higher than asperity height, respectively. These arise from the fact that, once the infilling thickness exceeds asperities, strength and deformability of the sliding plane is controlled by the engineering characteristics of the infilling materials. The results obtained in this study clearly show that the water force at failure was found to increase with increasing joint roughness, and to decrease with increasing filling thickness. It seems possible to estimate failure time using the inverse velocity method for sliding plane having exponential type of deformability. However, it is necessary to estimate failure time by trial and error basis to predict failure of the slope accurately.

• Journal of Animal Science and Technology
• /
• v.46 no.5
• /
• pp.753-762
• /
• 2004

its digests on the performance of broiler chicks and taurine content in broiler meat. A total of 100 broiler chickens were assigned to five dietary treatments; Control, PM diet(FM), NaOH treated FM diet(NaOH-FM), HN03 treated FM diet(HN03 - FM) and 0.5% synthetic taurine supplemented diet(Taurine). Treated diets were supplemented with FM or FM digests at the level of 5% to the control diet Treated diets were fed during the last 3wks of 6wks feeding. During the finisher period, weight gain of chicks fed FM treatments tended to decrease in general. Feed intakes of FM and Taurine were significantly lower than the control but were not significantly different from NaOH - FM or HN03- PM. Feed conversion rate(feed intake/gain) of NaOH-FM was significantly higher than those of FM and HNOJ - FM but not different from those of the control and Taurine. Taurine content of the control was highest in heart muscle(1482 J1.g/g) followed by leg muscle(778f.lg/g) and breast muscle(79 J1.g/g). Taurine contents of leg and breast muscle were significantly(P< 0.01) affected by treatments but that of heart muscle was not. Taurine content of Taurine treatments was highest in both leg and breast muscle. Taurine content of leg muscle was increased 170"10 by Taurine supplementation, 123% by FM supplementation, 122% by NaOH - FM supplementation and 63% by HNOJ- FM supplementation compared with control. Taurine content of breast muscle of Taurine treatment was 246% higher than the control, but other treatments were not different from the control. In conclusion, supplementation of feather meal at 5% level of broiler diet can enrich taurine content of leg muscle. Chemical treatments of FM were not effective in improving taurine enrichment of broiler meat.