• Journal of Mechanical Science and Technology
• /
• v.19 no.3
• /
• pp.731-742
• /
• 2005

A magnetic bearing even with multiple coil failure can produce the same decoupled magnetic forces as those before failure if the remaining coil currents are properly redistributed. This fault-tolerant, force invariance control can be achieved with simply replacing the distribution matrix with the appropriate one shortly after coils fail, without modifying feedback control law. The distribution gain matrix that satisfies the necessary constraint conditions of decoupling linearized magnetic forces is determined with the Lagrange Multiplier optimization method.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.2
• /
• pp.215-225
• /
• 1994

In this paper, a performance evaluation of different current regulators for induction motor drive systems fed by IGBT inverter is presented. The twoparts of current regulation are considered : current error compensation part, voltage modulation part. The characteristics of hysteresis, synchronous PI, decoupled PI, predictive, deadbeat and stage feedback controllers are analyzed and the steady-state performances and transient responses of current regulation are well compared through the simulation and experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.478-481
• /
• 1996

Tracking a target of versatile maneuver recently demands a stable adaptation of tracker, and the multiple model techniques are being developed because of its ability to produce useful information of target maneuver. This paper presents the way to apply the multiple model method in a moving-target and moving-platform scenario, and the estimation and prediction results better than those of single Kalman filter.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1290-1292
• /
• 1999

In this paper. continuation power flow for Power system including UPFC has been performed. The decoupled model, by which power flow can be performed without any modification of conventional power flow program is used as steady-state model. A numerical example has been given to analyze the influence on the voltage stability by UPFC.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.99-104
• /
• 1989

A practical filter is suggested for ground-Dasea missile tracking in a capture guidance mode, utilizing angle-only measurements from a passive sensor and its performance is evaluated by a realistic system simulation study. Also suggested is a missile acceleration model that provides inputs to the filter. The suggested filter has a decoupled structure of independent azimuth and elevation channels with efficiency in commutation time and memory requirements.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.993-998
• /
• 1988

Adaptive control system has evolved as an attempt to avoid degradation of the dynamic performance of a control system when environmental variations occurs. While the feedback control system is oriented toward the elimination of the effect of state perturbations, the adaptive control system is oriented toward the elimination of the effect of structural perturbation, upon the performances of the control system. The model reference adaptive controller is utilized in velocity loop controller for positioning and tracking is designed based on the linear decoupled dynamics.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.32-36
• /
• 1988

Generally, for nonlinear control of robotic system, the method of computed torque or inverse dynamics is frequently used. In this case, exact knowledge of the system parameters is required, however. This paper addresses the problem of nonlinear control when the parameter of system is varied. The approach is based upon decoupled model following. As an example, control of a three degree of freedom manipulator arm under mass variation is simulated.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.4
• /
• pp.7-13
• /
• 1998

The gloval model is developed by combining this actuator formular with robot manipulator which is reported previously . The model initially represented in the form of coupled time-varying nonlinear dynamic system. It then decomposed into the decoupled linear model using nonlinear feedback and state transformation techniques. The new model employes the pole replacement method to improve the stability of the system. Using this new model, an robust control algorithm is developed. The proposed algorithm takes two state variables, position vector and velocity vector, and one input variable from actuator, input voltage.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.131-136
• /
• 2003

Five expensive sensors are necessary to control a magnetic bearing system. The sensor price rate of magnetic bearing system is high. So it is necessary that cheap and good sensor is developed. The optical fiber displacement sensor is adaptive to satisfy this condition. We can design magnetically suspended spindle based on static characteristic of optical fiber displacement sensor developed. The controller can be designed by decoupled feedback PD. Therefore, it is simpler than any other controller comparatively.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.140-145
• /
• 1992

This paper presents a decentralized model reference adaptive control scheme for an interconnected linear system composed of a number of single-input single-output subsystems in which outgoing interactions pass through the measurement channel and are subjected to bounded external disturbances. The scheme can treat the unknown strength of interactions as well as uncertainties in subsystem dynamics, and allows for the case when the relative degree of each decoupled subsystem does not exceed two.