• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.3
• /
• pp.193-210
• /
• 1991

For the deckhouse or superstructure, attention is directed to the reduction of vibration from a human susceptibility point of view. The two basic requirements for obtaining a low vibration level in the accommodation are to ensure that excitation forces from propeller and/or main engine are small and to avoid resonance excitation of the hull and superstructure. In recent years increased attention has been directed towards the problems of vibration and noise in deckhouse, which have caused major problems with regard to the environmental quality in the living quarters for crews. Accordingly, in this paper, the characteristic of the vibration of deckhouse of fishing boat, of which the length/height ratio is also relatively high, are studied systematically with regard to the shape and modelling of deckhouse based on finite element method of 1-dimensional, 2-dimensional and 3-dimensional model. This study is divided into 4-part. 1st part is the global deckhouse vibration, 2nd part is the local deckhouse vibration, 3rd part consists of the estimation for stiffness of foundational support and 4th part is the application to TUNA LONG LINER of 416 ton class. For the global vibration analysis, the severity of the vibration depends on the longitudinal shear and bending stiffness of the deckhouse, on the vertical deckhouse support(fore, aft and sides). However, even if the design is technically sound, vibration problems may arise due to vertical or longitudinal hull girder or afterbody resonances. Author applied the method of this study to the analysis of, deep-sea fishing vessel of G.T. 416 ton class with relatively low height and long deckhouse, and investigated the vibrational characteristic of the fishing vessel with earlier structural feature. According to this investigation, the vibration, response of above vessel was confirmed of which main hull and deckhouse behave as one body. It is at the bottom of vibrational trouble which a accommodation part of the fishing vessel is raised, that is the local vibration for side wall, fore-aft wall and deck plate of deckhouse rather than thief fect of fore-aft vibration of deckhouse for above fishing vessel. and the resonance of main hull, deckhouse and driving system such as the main engine, propeller in exciting source is mainly brought up as the trouble.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.2
• /
• pp.141-154
• /
• 2017

A production management system is developed to enhance both the information and productivity of ship and offshore plant deckhouse floor outfitting. The functions of the production management system for the deckhouse floor outfitting were reviewed based on a literature survey of several production management systems with respect to the ship building and architecture fields. This study investigated numerous daily production reports and their application to actual work places to utilize the system development. The developed scanned drawing-based production management (SDPM) system minimizes any loss and/or distortion of work information between the workshop and management office when applying a scanned production drawing to the daily report. The SDPM system increases the data objectivity, as well as intuitiveness of the information generation by adopting an efficient user interface, which makes it possible to perform image annotations on the scanned drawing for the daily production report while simultaneously interacting with the production management database. Applying the system operation to actual deckhouse floor covering work verified that it was feasible to use the SDPM system for production management in the ship outfitting work process.

• Journal of the Korean Society of Safety
• /
• v.26 no.6
• /
• pp.79-84
• /
• 2011

There have been so many studies related to job stress or musculoskeletal disorders(MSDs) in the shipbuilding industry. However, study of employee performance evaluation that reflect on the industrial features of the deckhouse manufacturing industry has not been established. Therefore, this study aimed to evaluate workers' job stress and work ability through statistical significance tests according to age, work types, years of service, work forms and sex. For this, the study conducted a job stress test using the Korean Occupational Stress Questionnaire Short Form, and employee performance evaluations using the Work Ability Index(WAI) of the Finnish Institute of Occupational Health (FIOH) on 536 workers in the deckhouse manufacturing industry. MINITAB statistics program was used for statistics analysis and significance was verified with the Kruskal-Wallis test, a corporate body of nonparametric statistical analysis. As a result, employee performance had significant differences, depending on age, work types, years of service and sex, and job stress also depended on the number of service year and work form. Additionally, it was found that employee performance decreased more as job stress increased.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.876-880
• /
• 2000

Vibration problem of deckhouse structure in a container vessel was investigated through the analysis and measurement. The natural frequency of deckhouse structure was found to be resonant with main engine 4th order excitations in the operating range, major sources of which were main engine inertial moment and axial thrust of the propulsion shafting system. To investigate and solve the problem, exciter test was performed to identify the vibration chracteristics of the ship structure and mechanical balancer was installed to compensate the 4th order inertial moment. Measurement results under the conditions with and without balancer operating were compared and analyzed to confirm the balancer effect. Good coincidence was found between the measurement and analysis results, which made it possible to predict the vibration problem in the earlier design stage.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2005.06a
• /
• pp.76-83
• /
• 2005

Membrane type LNG Carriers are characterized by their special structures such as trunk deck above upper deck. It is necessary to introduce an appropriate structure arrangement taking into account transition of the trunk deck to the upper deck or deckhouse in fore and aft parts. The transition area at aft part -from trunk deck to the deckhouse - is to be specially considered because of high longitudinal stresses applied at the area. This study has been carried out to tackle the transitional structure problem in design stage This paper deals with not only mesh size of FE models for scantling evaluation and fatigue assessment but also technical issues regarding fatigue assessment.

• Journal of the Korea Society for Simulation
• /
• v.25 no.2
• /
• pp.75-81
• /
• 2016

By using simulation, fixed location production method and flow production method have been compared to improve the productivity of deckhouse preceding outfitting process. In this paper, we analyze that the suggested flow production system instead of fixed location production can improve productivity. In current preceding outfit production system which adopts fixed location production, where a block occupies an area and does not move until the work finishes. On the other hand, in improved flow production system, the block moves instead of workers and equipment. Though the output of two systems are almost the same when we did not consider the moving time and waiting time of blocks, the flow production will be better when the variability of task time will be reduced.

• International Journal of Korean Welding Society
• /
• v.5 no.1
• /
• pp.44-52
• /
• 2005

The purpose of this study is to establish a design tool for the shrinkage margin of a deckhouse caused by welding and flame straightening. In order to do it, the effects of heat intensity and internal/external restraint condition on the shrinkage of the simple weldments were investigated, in order to identity the principal factors controlling shrinkage caused by welding process and flame straightening. Based on the results, predictive equations for longitudinal and transverse shrinkage at the welded structure were formulated as the function of heat intensity and in-plane rigidity. These equations were verified by comparing predicted results with the measured results at a panel structure of deckhouse.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2013.12a
• /
• pp.55-59
• /
• 2013

Transverse vibrations of ship's aft end and deckhouse among the various modes of hull structures are induced mainly by transverse exciting forces and moments of main engine such as ${\times}$ and h-moment. Avoidance of resonance should be made in a intial design stage in case there is a prediction for resonance between main engine and transverse modes of deckhouse. This study shows a case of change in type of main engine from 12 cylinders to 10 without modification of hull structures in engine room requested by a shipowner of 8,600 TEU class container carrier and proposes a guide to the effective ways of structural arrangement for avoiding resonance between transverse exciting force and surrounding structures of main engine in engine room through case studies.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.672-676
• /
• 2003

Recently, the importance of ship vibration is emerging due to the large scaling, high speed and lightning of ship. For pleasantness in a cabin, shipbuilders ask for strict vibration criteria and the degree of vibration level at a deckhouse became an important condition for taking order from customers. This study conducted optimum design to attenuate vibration level of a deckhouse to solve above problems. New method was implemented, that is NASTRAN external call type independence optimization method. The merit of this method is global searching after setting various object functions and design variables. The global optimization algorithm used here is R-Tabu search method, which has fast converging time and searching various size domains. By modeling similar type to ship structure, validity of the suggested method was investigated.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2007.09a
• /
• pp.79-88
• /
• 2007

In this study, we improved the layout of deckhouse pre-erection area where erects the blocks and developed the pre-erection block arrangement system for the improvement of productivity and effectiveness. The major operating point of the pre-erection area is to fabricate as many as possible that has restrict area and working plate. The developed system has information management module, scheduling module, schedule control module, statistics module, and information integrate module. The heuristic algorithm is issued and evaluated with real data. And genetic algorithm is used for the evaluation of issued it.