• Korean journal of applied entomology
• /
• v.48 no.1
• /
• pp.21-27
• /
• 2009

Paromius exiguus (Distant) has caused serious damage by pecky grains around Gimpo paddy fields in 2001. We conducted field and laboratory studies to determine the seasonal occurrence and age distribution of P. exiguus on the three major host plants. The overwintering P. exiguus was found mainly on the basal part of gramineae weeds in various localities. After overwintering, in mid-May, the adults aggregated on the grain parts of Imperata cylindrica, laid their eggs and nymphs developed into adults on the same host plants. By the time, the Calamagrostis epigeios colony had newly occupied I. cylindrica areas, the nymphs and adults of first generation had already moved to the second host. The second generation of P. exiguus, after having completed its life cycle on C. epigeios, the newly emerged adults migrated to the rice plants and other gramineae weeds in early August. Afterwards, they complete its third generation cycle where they can move to the overwintering site again. P. exiguus has the five nymphal stages and each nymphal stage could be determined by head or prothoracic width. On the I. cylindrica and O. sativa hosts, the age distribution of P. exiguus showed a simple structure as each stage ratio increased stepwise with time. But in case of C. epigeios, as the newly emerged adults and immature nymphs continuously migrate after a month from the I. cylindrica, the age structure became remarkably complex. The peak nymphal density was observed when the ratio of third and forth instar was the highest in the population. The finding about the specific age structure on each generation of the insect would be very useful in control decision making on the major host plants. It is also important to consider the host's specificity to pesticide sensitivity in relation to various nymphal stages.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.6
• /
• pp.51-64
• /
• 2022

Along with the urbanization, the risk of urban flooding due to climate change is increasing. Flood regulation, one of the ecosystem services, is implemented in the different level of function of flood risk mitigation by the type of ecosystem such as forests, arable land, wetlands etc. Land use changes due to development pressures have become an important factor in increasing the vulnerability by flash flood. This study has conducted evaluating the urban flood regulation service using InVEST UFRM(Urban Flood Risk Model). As a result of the simulation, the potential water retention by ecosystem type in the event of a flash flood according to RCP 4.5(10 year frequency) scenario was 1,569,611 tons in urbanized/dried areas, 907,706 tons in agricultural areas, 1,496,105 tons in forested areas, 831,705 tons in grasslands, 1,021,742 tons in wetlands, and 206,709 tons in bare areas, the water bodies was estimated to be 38,087 tons. In the case of more severe 100-year rainfall, 1,808,376 tons in urbanized/dried areas, 1,172,505 tons in agricultural areas, 2,076,019 tons in forests, 1,021,742 tons in grasslands, 47,603 tons in wetlands, 238,363 tons in bare lands, and 52,985 tons in water bodies. The potential economic damage from flood runoff(100 years frequency) is 122,512,524 thousand won in residential areas, 512,382,410 thousand won in commercial areas, 50,414,646 thousand won in industrial areas, 2,927,508 thousand won in Infrastructure(road), 8,907 thousand won in agriculture, Total of assuming a runoff of 50 mm(100 year frequency) was estimated at 688,245,997 thousand won. In a conclusion. these results provided an overview of ecosystem functions and services in terms of flood control, and indirectly demonstrated the possibility of using the model as a tool for policy decision-making. Nevertheless, in future research, related issues such as application of models according to various spatial scales, verification of difference in result values due to differences in spatial resolution, improvement of CN(Curved Number) suitable for the research site conditions based on actual data, and development of flood damage factors suitable for domestic condition for the calculation of economic loss.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1061-1061
• /
• 2001

The scope of precision agriculture is to reach the put up cultivation goals by adjusting inputs as precise as possible after what is required by the soil and crop potentials, on a high spatial resolution. Consequently, precision agriculture is also often called site specific agriculture. Regulation of field inputs “on the run” has been made possible by the GPS (Geographical Position System)-technology, which gives the farmer his exact real time positioning in the field. The general goal with precision agriculture is to apply inputs where they best fill their purpose. Thus, resources could be saved, and nutrient losses as well as the impact on the environment could be minimized without lowering total yields or putting product quality at risk. As already indicated the technology exists to regulate the input based on beforehand decisions. However, the real challenge is to provide a reliable basis for decision-making. To support high spatial resolution, extensive sampling and analysis is required for many soil and plant characteristics. The potential of the NIR-technology to provide rapid, low cost analyses with a minimum of sample preparation for a multitude of characteristics therefore constitutes a far to irresistible opportunity to be un-scrutinized. In our work we have concentrated on soil-analysis. The instrument we have used is a Bran Lubbe InfraAlyzer 500 (1300-2500 nm). Clay- and organic matter-contents are soil constituents with major implications for most properties and processes in the soil system. For these constituents we had a 3000-sample material provided. High performance models for the agricultural areas in Sweden have been constructed for clay-content, but a rather large reference material is required, probably due to the large variability of Swedish soils. By subdividing Sweden into six areas the total performance was improved. Unfortunately organic matter was not as easy to get at. Reliable models for larger areas could not be constructed. However, through keeping the mineral fraction of the soil at minimal variation good performance could be achieved locally. The influence of a highly variable mineral fraction is probably one of the reasons for the contradictory results found in the literature regarding organic matter content. Tentative studies have also been performed to elucidate the potential performance in contexts with direct operational implications: lime requirement and prediction of plant uptake of soil nitrogen. In both cases there is no definite reference method, but there are numerous indirect, or indicator, methods suggested. In our study, field experiments where used as references and NIR was compared with methods normally used in Sweden. The NIR-models performed equally or slightly better as the standard methods in both situations. However, whether this is good enough is open for evaluation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1267-1273
• /
• 2022

Although the Korea shipbuilding industry has recently been receiving most of the orders for ships in the world, production processes are being disrupted due to a shortage of manpower at the production site. This is because the workers quit the shipyard as both work and wages were reduced due to the long slump in the shipbuilding industry. The main reason for the increase in orders was the large-scale orders for Qatar LNG carriers, and the situation in which the technical specifications required for ships are becoming more complex is also working to an advantage. Because the contract delivery time is of utmost importance for ships, the dock launch plan is the most important management item among the shipyard's major processes. The structure to be built in the dock may be a hull that has left the design work or a finished vessel, and in some cases, it is often at the level of some blocks of the hull. When launching, the hull is affected by the hogging or sagging moment due to the fluid force, and securing the safety of the structural strength of the block connection is of utmost importance. In a normal process, the connecting member launches after welding has been completed, but in actual shipbuilders, quick decision-making is needed on the conditions for securing structural safety to comply with the docking schedule. In this study, a detailed analysis method and applicability using a bending stress evaluation method and finite element analysis modelling were analyzed to rationally judge the above-mentioned problems from an engineering point of view. The main contents mentioned in the thesis can be used as good examples when conducting similar structural strength evaluations in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.630-637
• /
• 2019

The scientific, economical and industrial values of the Moon have been increased, as massive ice-water and rare resource were founded from the lunar exploration missions. Korea and other major space agencies in the world are competitively developing the ISRU (In Situ Resource Utilization) technology to secure future lunar resource as well as to construct the lunar base. To prepare for the lunar construction, it is essential to develop the rover based construction spatial information technology to provide a decision-making aided information during the lunar construction process. Thus, this research presented the construction spatial information technology based upon rover's camera system. Specifically, the conceptual design of rover based camera system was designed for acquisition of a rover's navigation image, and lunar terrain and construction images around the rover. The reference architecture of the rover operation system was designed for computation of the lunar construction spatial information. Also, rover's localization and terrain reconstruction methods were introduced considering the characteristics of lunar surface environments. It is necessary to test and validate the conceptual design of the construction spatial information technology. Thus, in the future study, the developed rover and rover operation system will be applied to the lunar terrestrial analogue site for further improvements.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.5
• /
• pp.609-616
• /
• 2008

Recently, many ocean bridges that connect land to island or island to island have been constructed along with the improvement of the nation's economy. Long-span bridges can be categorized as suspension bridge, cable-stayed bridge, arch bridge and truss bridge. In this study, correction with respect to construction error can be presented on site through the monitoring of the cable tension change of real structure for four major construction stages so that construction accuracy, including the management of profiles, can be improved. A vibration method, the so-called indirect method that uses the cable's natural frequency changes from the acceleration sensor installed on the cable, is applied in measuring cable tension. In this study, the estimation formula for the effective length of cable with damper is presented by comparing and analyzing between actual measurement and analysis result for the change of the cable's effective length. By the way, it is known that the reliability of estimating cable tension by applying the former method that uses the net distance from damper to anchorage is low. Therefore, for future reference of the maintenance stage, the presented formula for estimating the effective length of cable can be used as a reference for the rational decision-making, such as the re-tensioning and replacement of cable.

• Journal of Korean Society of Forest Science
• /
• v.103 no.4
• /
• pp.639-645
• /
• 2014

This study was conducted to evaluate the management efficiency of oak mushroom farms in Korea using the Data Envelopment Analysis (DEA), which is one of the non-parametric estimation methods. The data that was analyzed in this study was from the result of 2013 survey entitled "Standard Diagnostic Table for Oak Mushroom Management", which was conducted from March 2012 to October 2012. This survey was based on the inputs and outputs of 20 oak mushroom farms. Specifically, this study analyzed the technical efficiency, pure-technical efficiency and scale efficiency using CCR and BCC model of the DEA methods. Furthermore, this study compares the management efficiency between the full time oak mushroom production farms and part time oak mushroom production farms. Results showed that mean value for the technical efficiency was 0.655 which is considered as inefficient in general. For the pure-technical efficiency and scale efficiency, the mean values were 0.830 and 0.747, respectively which showed that inefficiency in the management was observed in the mushroom farms. Results also showed that there were seven farms with a total efficiency of 1, namely Decision Making Unit(DMU)2, DMU5, DMU6, DMU8, DMU10, DMU15 and DMU20. The management efficiency of DMU7 specifically the inputs for production was analyzed and compared to DMU5 and DMU6 and results showed that the DMU7 had an excessive inoculation and site development cost. Lastly, it was also observed that the full time mushroom production farms were more efficient as compared to the part time mushroom farms because of the lower scale efficiency value or smaller area for mushroom production allotted in the part time farms.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.6
• /
• pp.45-52
• /
• 2019

As international criteria and standards are required in the fields of design and construction, landscape performance must also be considered not only for the value of the landscape but also for providing quality assurance and sustainability. Given the lack of research on landscape performance, the present research was purposed to analyze the importance of potential assessment categories and items using an analytical network process. A list of assessment items, which is composed of 20 items and 6 categories, was derived through a literature review and a preliminary survey of 11 landscape professionals. An ANP model was established and a survey was conducted among 30 landscape practitioners to determine the weight of priorities considering the criteria. The results of ANP showed that the categories of site selection, preservation and health, and convenience had high priorities while materials had the lowest importance score. For the assessment items, a monitoring plan was the highest importance, followed by cultural/ historic preservation, management cost reduction, and natural ground areas. Despite the difficulties in quantifying landscape achievements, most respondents agreed that there needs to be an evaluation system for landscape performance in order to assure the quality and sustainability of landscape development. More research and discussion are needed to develop an assessment system for landscape performance that is applicable to Korean context.

• Korean Journal of Environment and Ecology
• /
• v.29 no.5
• /
• pp.681-692
• /
• 2015

It is well documented that physiological and nutritional condition of wintering birds is strongly related to migration success to breeding sites, and also breeding success. However, how abiotic factors during winter affect the migration and breeding successes still remains unclear. Thus, this study developed a dynamic-state-dependent model for wintering life-history to identify the potential impact on the life-history, success to breeding site and breeding success of wintering birds, which are related to temperature fluctuation, interspecific competition and human disturbance at the wintering sites. To find the best-fit-model, we referred to the existing research data on wintering ecology of Red-crowned cranes (Grus japonensis) in Cheolwon, Korea, which is well documented as a long-term wintering study. Our model predicted that the higher temperature fluctuation and a higher rate of human disturbance are negatively related to migration success to breeding sites and their fitness, ultimately breeding success via changing of proportion in resource allocation (for e. g., lower energy compensation or higher level of stress accumulation). Particularly, the rate of body mass compensation after arrival at wintering sites may be accelerated when there are less temperature fluctuations and a lower rate of human disturbance. In addition, the rate of interspecific competition sharing the wintering foraging sites is negatively related to the rate of body mass compensation. Consequently, we discussed the conservation strategies of wintering birds based on the outcomes of the model.

• Journal of Yeungnam Medical Science
• /
• v.24 no.2
• /
• pp.148-153
• /
• 2007

Background : Computer- and web-based simulation methods help students develop problem solving and decision making skills. In addition, they provide reality based learning to the student clinical experience with immediate medical feedback as well as repetitive training, on-site reviews and case closure. Materials and Methods : Seventy-five third-year medical students participated in a two-week simulation program. The students selected four modules from eight modules as follows: airway and breathing 1, cardiac arrest 1, cardiac arrhythmia 1, and chest pain 1, and then selected the first case within each of the modules. After 2 weeks, a pass score was obtained and the data analyzed. The average pass score of over 70% was considered a passing grade for each module. If the student did not pass each module, there was no score (i.e., pass score was zero). In addition, when at least one of the four modules was zero, the student was not included in this study. Results : Seventy-five students participated in the simulation program. Nineteen students were excluded based on their performance. The final number of students studied was 56 students (74.7%). The average scores for each module 1 to 4 were 86.7%, 85.3%, 84.0%, and 84.0%, and the average obtained pass score was 88.6 for the four modules in all 56 students. Conclusion : Medical simulation enabled students to experience realistic patient situations as part of medical learning. However, it has not been incorporated into traditional educational methodology. Here we describe the introduction and the development of various simulation modules and technologies for medical education.